Boot stall on VCK190 about fpga-drive-aximm-pcie

[fpgadeveloper]

Hi,

Could you try the pre-built boot files here:
FPGA Drive FMC VCK190 FMCP1 pre-built boot files

Have you followed the SD card preparation instructions here?
Prepare the SD card

Does your board have production silicon or engineering sample silicon?

[boolsmith]

Hi,

I verified that the pre-built boot files can be used to successfully boot the board.

I compared the SD card files I used with the supplied pre-built boot files to verify no differences.

I have production silicone

I was able to get my project to successfully boot by starting from scratch and: making the Vivado project, and the Vitis project before I made the Petalinux project. Based on the documentation, it sounds like making the vitis project is optional, and that when make is called in petalinux, it will call make for the Vivado project if it has not already been made. Is that correct?

Of course, It could be that I was more careful the second time through making the project, so I will go back to verify that I built the original Petalinux project correctly.

[fpgadeveloper]

Hi,

I'm glad that you have it working now.

If you only wish to use PetaLinux, then the Vitis project is not necessary - it is completely independent.

Yes, if you run the PetaLinux build before running the Vivado build, then the Vivado build will be run first. This is one of the benefits of using makefiles.