VC707 and FPGA Drive SSD can't see console logs during the petalinux booting. about fpga-drive-aximm-pcie

[fpgadeveloper]

Did you try to boot the standalone application? Does it work?
Here is the prebuilt standalone for VC707 HPC1:
https://opsero.com/downloads/boot/2020-2/vc707_hpc1_pcie-standalone-2020-2.tar.gz
Here is the prebuilt standalone for VC707 HPC2:
https://opsero.com/downloads/boot/2020-2/vc707_hpc2_pcie-standalone-2020-2.tar.gz

Did you try the latest version (Vivado 2020.2)?

I suggest you try to create a simple standalone project in Vitis using the Vivado project from this repo. Try a simple hello world application and see if it works.

[kmakhno]

yes, I try to boot standalone app and it works. Our company is using vivado2018.2 for now( I thought that it should work.

[kmakhno]

Also I did DRAM memory check and I have linked up pcie with standalone exam

[fpgadeveloper]

Sometimes we have issues on older versions and they don't end up getting fixed.
Please try booting one of these PetaLinux builds for 2020.2
[Uploading v
vc707-hpc2.zip
c707-hpc1.zip…]()

. They are .mcs files for booting from flash.

[fpgadeveloper]

vc707-hpc1.zip

[kmakhno]

thanks for reply, I booted your configuration file but I've got this exception

[fpgadeveloper]

Strange. Are you using FPGA Drive FMC? What is the serial number?

[kmakhno]

yes. I don't know what exactly serial number is)

[fpgadeveloper]

That's OK I can see the serial number in your first photo.

Can you try booting PetaLinux from JTAG with these prebuilt files for 2020.2 and 2019.2:
https://opsero.com/downloads/boot/2020-2/vc707_hpc1_pcie-petalinux-2020-2.tar.gz
https://opsero.com/downloads/boot/2020-2/vc707_hpc2_pcie-petalinux-2020-2.tar.gz
https://opsero.com/downloads/boot/2019-2/vc707_hpc1_pcie-petalinux-2019-2.tar.gz
https://opsero.com/downloads/boot/2019-2/vc707_hpc2_pcie-petalinux-2019-2.tar.gz

To boot them, use XSCT and these commands:

  connect
  fpga -f system.bit
  target 3
  dow image.elf
  con

It will take a while to load the image.elf file because it is large. It will also take a couple minutes before you start seeing the boot log. Please try the 2020.2 version first and then the 2019.2 if that fails.

[kmakhno]

hi, I tried it. At first I tried 2020 files and they gave me this logs

And I waited for some time but didn't get some logs
Then I tried 2019 files and I had the same situation as with 2018. After approximately 15 minutes I didn't get logs.