valegagge / icub-firmware Goto Github PK

View Code? Open in Web Editor NEW

iCub Firmware

License: Other

C 97.62% C++ 0.50% Assembly 1.61% Shell 0.01% Makefile 0.11% PowerShell 0.01% Batchfile 0.01% HTML 0.08% Python 0.01% Gnuplot 0.01% CSS 0.01% JavaScript 0.01% CMake 0.01% C# 0.06% Perl 0.01%

icub-firmware's Introduction

iCub Firmware

This folder contains the source code for the software running on all boards of iCub Humanoid Robot.

The iCub board software is composed of the firmware layer, colled also Hardware Abstraction Layer, and application layer. The first layer provides services (such as peripherical management, ..) to the second one; the application layer implements motor control or sensors reading.

This repository is structured as follows:

loader56f807 --> boot loader for boards with DSP56f807
loader56f807NoSleep --> boot loader for boards with DSP56f807 without sleep of 5 seconds
loaderDspic30f4011 --> boot loader for boards with DSPic30f4011 (skin (i.e. mtb3) )
loaderDspic30f4013 --> boot loader for boards with DSPic30f4013 (strain, mais)
libDsp56f807 --> libraries (source code, progect files and .lib) that supply services to motor controller applications (folder MotorControllerDsp56f807)
libDspic30f4013-HAL --> libraries (source code, progect file and .lib) that supply services to sensor applications (Mais, Strain)
MotorControllerDsp56f807 --> motor controller applications, one for each motor-board.
sensorReaderDspic30f4013 --> sensor reader application: Mais and Strain
mtb3 --> "skin - application"

The firmwares obtained compiling the source code contained in this repository using board-specific tools are available at https://github.com/robotology/icub-firmware-build.