Topic: hspice Goto Github
Some thing interesting about hspice
Some thing interesting about hspice
hspice,This project demonstrates how to use python to analyze HSpice simulation data.
User: alexyazdani
hspice,This paper presents an intelligent sizing method to improve the performance and efficiency of a CMOS Ring Oscillator (RO). The proposed approach is based on the simultaneous utilization of powerful and new multi-objective optimization techniques along with a circuit simulator under a data link. The proposed optimizing tool creates a perfect tradeoff between the contradictory objective functions in CMOS RO optimal design. This tool is applied for intelligent estimation of the circuit parameters (channel width of transistors), which have a decisive influence on RO specifications. Along the optimal RO design in an specified range of oscillaton frequency, the Power Consumption, Phase Noise, Figure of Merit (FoM), Integration Index, Design Cycle Time are considered as objective functions. Also, in generation of Pareto front some important issues, i.e. Overall Nondominated Vector Generation (ONVG), and Spacing (S) are considered for more effectiveness of the obtained feasible solutions in application. Four optimization algorithms called Multi-Objective Genetic Algorithm (MOGA), Multi-Objective Inclined Planes system Optimization (MOIPO), Multi-Objective Particle Swarm Optimization (MOPSO) and Multi-Objective Modified Inclined Planes System Optimization (MOMIPO) are utilized for 0.18-mm CMOS technology with supply voltage of 1-V. Baesd on our extensive simulations and experimental results MOMIPO outperforms the best performance among other multi-objective algorithms in presented RO designing tool.
User: ali-ece
hspice,Multi-objective optimization based on sloping plate optimization algorithm called Multi-objective Inclined Planes system optimization algorithm (MOIPO) is presented in this link. The proposed method uses the concept of Pareto optimization to identify non-dominant positions and an external tank to maintain these positions.
User: ali-ece
hspice,Advanced Programming Project - Sharif University of Technology - Electrical Engineering Department
User: alinourian
hspice,An easy to use GUI for multi-objective optimization of electrical and electronic circuits using evolutionary and heuristic algorithms and HSPICE.
User: behinagroup
Home Page: https://www.circuitoptimization.com
hspice,Script that automates the process to create multiple Spice files through copying and appending. Each file is ran through subprocess and HSPICE, output is saved to find min Time Delay.
User: colbybrooks
hspice,FuzzyMSFLA-Algorithm (Fuzzy adaptive optimisation method)
User: farshidkeivanian
hspice,FuzzyNSGA-II-Algorithm (Fuzzy adaptive optimisation method)
User: farshidkeivanian
hspice,FuzzyIWO-Algorithm (Adaptive fuzzy optimisation algorithm)
User: farshidkeivanian
hspice,Modified Nodal Analysis by using MATLAB
User: geraked
hspice,FinFET Registers - Instituto de Informática da UFRGS
User: gumadeiras
hspice,This place provide different SRAM cells netlist to be simulated with HSpice tool in sub-20nm FinFET technologies.
User: hassan313
hspice,grayscale conversion system and simple convolution system
User: hsuchichen
hspice,Principle of electronics is one of the undergraduate courses in Sharif university of technology that is about analysis and design amplifying electronic circuits
User: kasrafallah
hspice,We were required to design a "fully differential OpAmp" with some analysis, including open-loop gain ones and closed-loop ones in common-mode and differential-mode. Moreover, we simulated it with DC sweep, AC response, response with step, in order to obtain the waveform and check whether our design achieved the specification.
User: liou05202798
hspice,This frequency divider is able to divide the clock signal depending on 3-bit input signal. Also, we were required to draw block diagrams to represent the structure, use “laker” to layout, use another software to simulate the different after doing layout, and analyze delay and power consumption.
User: liou05202798
hspice,HSPICE implementation of hybrid CMOS/Memristor BAM
User: mahdiyarmm
hspice,Digital Systems 1 & 2 + Digital Systems Laboratory 1 + Digital Electronics Circuit +Microprocessor Based and Embedded Design courses projects
User: mohammadmahdi-abdolhosseini
hspice,2-to-1 Decoder implemented using cmos, pseudo-nmos and dynamic logic
User: negarmirgati
hspice,Digital Electronic Circuits
User: negarmirgati
hspice,Latch and Flip Flop Analysis Using Hspice
User: negarmirgati
hspice,HSPICE and MATLAB simulation files of a tracking SAR ADC
User: neurofan
hspice,This is a novel application of active analog circuits for computing the Cartesian coordinates of points ( targets ) in 2D and 3D space. Two anchors ( points ) are assumed available, with known coordinates. Optical or Infrared Angle-of-Arrival , AOA, (noisy) measurements from each anchor to the uknown target are assumed available.
User: niliev4
hspice,Simplify VLSI (timing, power, noise, correlation, reliability) modeling and analysis with Characterization Description Format
Organization: paripath
hspice,Tanslate a TB model into Hcircuit Model (Spice Model) and manipulate it
User: parkman-auex
hspice,A center of gravity defuzzifier implemented as an analog CMOS circuit
User: pouryahoseini
hspice,An analog circuit of a neural network to be used as a weighted order statistic filter
User: pouryahoseini
hspice,MATLAB toolbox to read HSPICE generated output files
User: raihanm90
hspice,Multiplier is one of the most important arithmetic unit in Microprocessors and DSPs and also a major source of power dissipation. Reducing the power dissipation of multipliers is a key to satisfy the overall power budget of various digital circuits and systems. The project elaborates the steps required to design array multiplier. The fundamental units to design a multiplier are adders. The variants of adders used in this project are Carry Save Adder(CSA) and Carry Propagate Adder(CPA). The main objective of our work is to calculate the average power, delay and PDP of 4x4 multipliers. The design of Half adder and Full adder for low power is obtained and the low power units are implemented on the array multiplier and the results are analyzed for better performance. The designs are done using Mentor Graphics tool and are simulated using H-SPICE
User: sanket94
hspice,NTUEE IC Design 23Fall HW2
User: shawntsai0312
hspice,This project is a part of the report for my 7th semester program elective (EC-4152 Low Power VLSI Design).
User: shobhit-mittra
hspice,NGSPICE Simulation of CMOS Circuits
User: teddy-van-jerry
Home Page: https://spice.tvj.one
hspice,Hpice Projects including DRAM, SRAM, High-Frequency Divider and Manchester Adder.
User: xkllkx
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.