flashing ESP32 about ems-esp32

[proddy]

So no AP is seen in your wifi router? Also do you see any LEDs flashing?

I'm not familiar with the download tool. Do you have a link to it?

[misu1lica]

The link:

https://www.espressif.com/sites/default/files/tools/flash_download_tool_v3.8.5.zip
Yes, I don't seen AP.
This module don't have LED on board, I try to put one.

[misu1lica]

Hi,
the LED does not flashing.
The program can't program ESP32 WROOM-32UE?
I try to program with uPyCraft_V1.1.exe and the same, the ESP did not have AP

On serial I read this:

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57

[proddy]

If you build the standard 'blink' app does it work?

If you're new to building and uploading, start with PlatformIO and pick the right flash mode for your board (dio/dout).

[misu1lica]

I programm esp8266 and all is OK.
But with esp32 don't work.

[proddy]

I can't help you without more information, sorry.

[misu1lica]

Hi
use ESPHome-Flasher-1.2.0-windows-x64 , https://github.com/esphome/esphome-flasher/releases work for ESP32!
But i must put in flash mode my ESP32 but press RST+BOOT, then release RST and after 1 secund relase BOOT.
And another schematic

misu

[proddy]

@misu1lica impressive design. Can you share some photos and also how you intend to use it? specially those photocouplers

[misu1lica]

I started with the motherboard and now I'm starting to program ESP.
For OK4 I want to monitor the boiler supply voltage (230Vac). We put power plants on the UPS - we still have voltage interruptions.
For OK3 I want to start a boiler.
For OK5 voltage drop alarm ...