MS200 Bosch Heat Assist valve about ems-esp32

[MichaelDvP]

The valves we expect here:
solar(0x30) -B-> All(0x00), SM100Status2(0x036A), data: 03 03 03 03 03 03 03 03 03 03 04 03
Offset 10 with value 04 means pump switched on, all valves closed. Can you switch the valve manally or trigger a switching? Then log a minute before and a minute after switching the valve to see the change.
We have VS1 in offset 0, VS2 in offset 4, M1 in offset 7, Pump1 in offset 10 and pump2 in offset1, all other values are unknown.

Do you have a name for TS8? Looks lke offset 22 in 0x362
solar(0x30) -B-> All(0x00), SM100Monitor(0x0362), data: 02 36 00 CE 80 00 00 C1 01 2C 01 80 80 00 80 00 80 00 80 00 80 00 01 A8
with value 42.4°C (0x01A8).