Topic: samd Goto Github
Some thing interesting about samd
Some thing interesting about samd
samd,test project using bare bones seal-device implementation
User: crustyauklet
samd,Tutorials and example code for SAMD21 and SAMD51 microcontrollers
User: davepruitt
samd,Electronic Cats Package Lists for the Arduino Board Manager
Organization: electroniccats
Home Page: https://electroniccats.github.io/Arduino_Boards_Index/package_electroniccats_index.json
samd,Arduino library for internal temperature of the family SAMD21 and SAMD51
Organization: electroniccats
samd,Using the Meow Meow you can make anything into a key just by connecting a few alligator clips
Organization: electroniccats
samd,Arduino P1AM Library
Organization: facts-engineering
Home Page: https://facts-engineering.github.io/
samd,I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.
User: ftjuh
samd,USB Gamepad/Joystick example using Adafruit TinyUSB
User: gdsports
samd,MIDI DIN to MIDI USB Host Converter
User: gdsports
samd,XAC compatible USB joystick using TinyUSB
User: gdsports
samd,This is project slLIN. An open source LIN protocol.
User: jgressmann
samd,Lightweight and fast preemptive scheduler for ATMega and SAM3X Arduino Boards
User: kcl93
samd,A simple library that implements an automatic DDNS Update Client for SAM DUE, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, RP2040-based RASPBERRY_PI_PICO, Portenta_H7, etc. besides ESP8266/ESP32, using ESP8266-AT/ESP32-AT WiFi, WiFiNINA, Ethernet W5x00, ENC28J60 or LAN8742A. It is designed to be light-weight and currently supports DuckDNS, No-ip, DynDNS, Dynu, enom, all-inkl, selfhost.de, dyndns.it, strato, freemyip, afraid.org.
User: khoih-prog
samd,Library for DS3231/DS3232 Extremely Accurate I2C-Integrated RTC/TCXO/Crystal. For nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, Portenta_H7 boards, RP2040-based, etc. besides ESP8266/ESP32, using ESP WiFi, Portenta_H7 WiFi, WiFiNINA, Portenta_H7 Ethernet, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi. Ethernet_Generic library is used as default for W5x00 Ethernet
User: khoih-prog
samd,This is simple yet complete WebServer library for AVR, Teensy, SAM DUE, SAMD, STM32, nRF52, etc. boards running ESP8266 AT-command shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now with fix of severe limitation to permit sending much larger data
User: khoih-prog
samd,Library to configure WiFi/Credentials at runtime for Teensy, SAM DUE, STM32F/L/H/G/WB/MP1, SAMD21/SAMD51, RP2040-based boards, etc. using WizFi360 /ESP8266 /ESP32-AT-command shields. You can also specify static AP and STA IP.
User: khoih-prog
samd,Simple Ethernet library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W5100S, W6100. With this library you can use the Arduino Ethernet (shield or board) to connect to Internet to provides both Client and server functionalities.
User: khoih-prog
samd,Simple Ethernet Manager for Teensy, SAM DUE, SAMD21, SAMD51, nRF52, ESP32, ESP8266, etc. boards, with or without SSL, configuration data saved in ESP8266 LittleFS, SPIFFS, nRF52 LittleFS/InternalFS, EEPROM, DueFlashStorage or SAMD FlashStorage.
User: khoih-prog
samd,This is simple yet complete WebServer library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21/SAMD51, nRF52, STM32, RP2040-based, etc. boards running Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Coexisting now with `ESP32 WebServer` and `ESP8266 ESP8266WebServer` libraries. Ethernet_Generic library is used as default for W5x00 with custom SPI
User: khoih-prog
samd,Simple TLS/SSL Ethernet WebServer, HTTP Client and WebSocket Client library for for AVR, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, ENC28J60 or Teensy 4.1 NativeEthernet/QNEthernet. It now supports Ethernet TLS/SSL Client. The library supports HTTP/HTTPS GET and POST requests, provides argument parsing, handles one client at a time. It supports Arduino boards (SAM DUE, Atmel SAM3X8E ARM Cortex-M3, SAMD21, SAMD51, ESP8266, ESP32, Adafruit nRF52, Teensy boards) using Wiznet W5x00 or ENC28J60 network shields. Ethernet_Generic library is used as default for W5x00 with custom SPI
User: khoih-prog
samd,The FlashStorage_SAMD library provides a convenient way to store and retrieve user's data using the non-volatile flash memory
User: khoih-prog
samd,The FlashStorage_STM32 library aims to provide a convenient way to store and retrieve user's data using the non-volatile flash memory of STM32F/L/H/G/WB/MP1. It's using the buffered read and write to minimize the access to Flash. It now supports writing and reading the whole object, not just byte-and-byte. New STM32 core v2.0.0 is also supported now. Useful if the EEPROM is not available or too small. Currently, STM32F/L/H/G/WB/MP1 are supported.
User: khoih-prog
samd,FTP Client for Generic boards such as AVR Mega, megaAVR, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, ESP32/ESP8266, etc.). FTP Client can use WiFi (ESP_WiFi, Portenta_H7 WiFi, WiFiNINA, WiFi101, U-Blox W101, W102, ESP8266/ESP32-AT), Ethernet W6100, W5100S, W5200,,..
User: khoih-prog
samd,mDNS Library for nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, AVR Mega, RP2040-based boards, etc. using Ethernet W5x00. Supports mDNS (Registering Services) and DNS-SD (Service Discovery). Ethernet_Generic library is used as default for W5x00
User: khoih-prog
samd,MQTT, MQTT_over_WebSockets and Secured MQTT_over_WebSockets Client for Arduino. Supporting nRF52, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RP2040-based boards, besides ESP8266, ESP32 (ESP32, ESP32_S2, ESP32_S3 and ESP32_C3) and WT32_ETH01. Ethernet shields W5100, W5200, W5500, ENC28J60, Teensy 4.1 NativeEthernet/QNEthernet.
User: khoih-prog
samd,This MySQL_MariaDB_Generic library helps you connect your boards directly to a MySQL / MariaDB server, either local or cloud-based, so that you can store / retrieve data to / from the server. Supported boards are ESP8266/ESP32, WT32_ETH01 (ESP32 + LAN8720A), nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, Mega, RP2040-based boards, Portenta_H7, etc. with Teensy 4.1 NativeEthernet/QNEthernet, W5x00 or ENC28J60 Ethernet, WiFiNINA modules/shields or Portenta_H7 WiFi/Ethernet. Ethernet_Generic library is used as default for W5x00
User: khoih-prog
samd,Library for NTPClient to connect to an NTP time-server. Get time from a NTP time-server and keep it in sync. For ESP8266/ESP32, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. besides AVR, using ESP WiFi, WiFiNINA, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi.
User: khoih-prog
samd,Asynchronous programming library for the generic microcontrollers compatible with the Arduino framework. Currently supporting ESP32, ESP8266, SAMD21/SAMD51, RP2040, STM32, nRF52, Teensy 4.x
User: khoih-prog
samd,This library enables you to use Interrupt from Hardware Timers on an SAMD-based board. These SAMD Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. SAMD21 now can use 6 Timers
User: khoih-prog
samd,This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nRF52, Teensy, etc. These Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
User: khoih-prog
samd,Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.
User: khoih-prog
samd,A simple library that implements port mappings to router using UPnP SSDP for Arduino boards, running on nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, RP2040-based boards, WT32_ETH01, Portenta_H7, etc. besides ESP8266/ESP32, using ESP WiFi, WiFiNINA, Ethernet W5x00, ESP8266/ESP32 AT-command WiFi, Portenta_H7 Murata WiFi or Vision-shield Ethernet.. It is designed to be light-weight and can run only on Ethernet or WiFi hardware/library supporting UDP Multicast. Supporting Teensy 4.1 QNEthernet now.
User: khoih-prog
samd,A WebSocket Server and Client library for Arduino, based on RFC6455, for writing modern Websockets applications. Now support ESP8266, ESP32 (including ESP32-S2 Saola, AI-Thinker ESP-12K, WT32_ETH01, etc.), nRF52, SAMD21, SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, Teensy, RP2040-based, etc. boards, with WiFiNINA, Teensy 4.1 NativeEthernet/QNEthernet, Ethernet W5x00 / ENC28J60 / LAN8742A / LAN8720, ESP8266 / ESP32-AT modules/shields, as well as SINRIC / Alexa / Google Home
User: khoih-prog
samd,WebSocket / Socket.IO Server and Client for Arduino based on RFC6455. Now supporting Adafruit nRF52, Portenta_H7, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, SAMD21, SAMD51, Arduino SAMD21 (Nano 33 IoT), MKR1000 / MKR1010WiFi, RP2040-based boards using WiFi101, WiFiNINA, WiFi, Ethernet, WT32_ETH01, Teensy 4.1 NativeEthernet/QNEthernet or Portenta_H7 WiFi/Ethernet, etc. so that those boards can be voice-controlled by Alexa. Now supporting websocket only mode for Socket.IO. Ethernet_Generic library is used as default for W5x00
User: khoih-prog
samd,Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43439, U-Blox W101, W102, ESP8266/ESP32-AT modules/shields, with functions similar to those of ESP8266/ESP32 MultiWiFi of WiFi libraries
User: khoih-prog
samd,This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA, CYW43439, U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library
User: khoih-prog
samd,A documentation automation system for SaMD and medical device software. Documentation-as-code for ISO62304 compliant development processes.
User: meindertn
samd,Atmel SAM: development platform for PlatformIO
Organization: platformio
Home Page: https://registry.platformio.org/platforms/platformio/atmelsam
samd,This library is a firmware for Seeed samd series board. It is friendly for embedded Machine learning.
Organization: seeed-studio
samd,Arduino Library for accessing NBIoT modules
User: thingforward
samd,Collection of SAMD Development Boards, Programmers, Tools and Firmware
User: wagiminator
samd,MicroPython LoRa EBYTE E22 device library complete and tested with Arduino SAMD, esp8266, esp32, Raspberry, rp2040 and STM32. sx1262/sx1268
User: xreef
Home Page: https://www.mischianti.org/category/my-libraries/ebyte-lora-e22-devices/
samd,MicroPython library for pcf8574 an i2c digital expander for Arduino, esp32, SMT32 and ESP8266. Can read write digital values with only 2 wire.
User: xreef
Home Page: https://www.mischianti.org/category/my-libraries/pcf8574/
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.