sonyxperiadev / device-sony-pioneer

Copyright (C) Sony Mobile Communications 2017

This is the Android device configuration for Xperia XA2 (nile platform).

Build instructions https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/

device-sony-pioneer's Issues

Image tearing and camera viewfinder green

Image tearing, which exists in aosp 9.
Camera viewfinder green.

[H3113] Phone reboot after call

On Android 11 AOSP on Sony XA2 H3113, phone reboots

• when you end a call,
• or when you receive an incoming call but don't answer, after the last ring

How to investigate and fix this?

make -j(android-9.0.0_r46),an error has occurred

[H3113] Rear camera can be used only once

Hi,
I'm not sure if this is the right place for this issue.
Please let me know.

I just compiled Android 11 AOSP following your official guide and installed latest official kernel SW_binaries_for_Xperia_Android_11_4.14_v2a_nile.zip on a Sony XA2 H3113.

Everything went fine, and phone works fine, except for the rear camera.
The camera always works fine when you use it for the first time after boot. But as soon as the camera was paused/shot down, it cannot be launched anymore, image is either black, or dark+green.

I tried many camera applications, they all behave the same, or don't work.

Spets to reproduce with AOSP camera app :

1. Launch the app : it should work
2. Go back home screen
3. Lauch camera again : screen remain black, or very dark/green, it is not possible anymore to take pictures

NB: front camera works fine

Regards

H3113 instead of H4113

I think I made a booboo when I first installed the latest firmware update of AOSP and then flashed twrp along with Lineage 15.1 and/or Lineage 16.0 because now when I check in About phone it says H4113 and that's correct, but if I boot to fastboot mode and do fastboot-android getvar all the product line says H3113. How does one switch the product number back to H4113?
The box that it came with says H4113 and the phone icon on my Linux desktop (MATE) says H4113 so it shouldn't be a problem, but it is.
I've been looking in XperiFirm to download the latest ROM and the ones I've tried to flash for H4113 failed because the device is "incompatible".

Problems with H3123

When I boot AOSP Pie built using the published guide for pioneer, the SIM card isnt detected at all. The ROM is very unstable and reboots now and then.

What's the correct sequence for flashing aosp and SW_binaries.img to the phone? Currently I'm doing boot_a -> boot.img, system_a -> system.img, vendor_a -> vendor.img, userdata -> userdata.img, oem -> SW_binaries.img .

Some snips from logcat

10-23 17:19:59.994     0     0 W healthd : battery l=100 v=4352 t=29.0 h=2 st=5 c=5 chg=u
10-23 17:20:04.418     0     0 I init    : starting service 'ril-daemon'...
10-23 17:20:04.506  2768  2768 D RILD    : **RIL Daemon Started**
10-23 17:20:04.506  2768  2768 D RILD    : **RILd param count=1**
10-23 17:20:04.518  2768  2768 E RILD    : dlopen failed: dlopen failed: library "[email protected]" not found
10-23 17:20:04.527     0     0 I init    : Service 'ril-daemon' (pid 2768) exited with status 1
10-23 17:20:04.527     0     0 I init    : Sending signal 9 to service 'ril-daemon' (pid 2768) process group...
10-23 17:20:04.527     0     0 I libprocessgroup: Successfully killed process cgroup uid 1001 pid 2768 in 0ms
10-23 17:20:06.944   753   808 E storaged: getDiskStats failed with result NOT_SUPPORTED and size 0
10-23 17:20:09.438     0     0 I init    : starting service 'ril-daemon'...
10-23 17:20:09.528  2769  2769 D RILD    : **RIL Daemon Started**
10-23 17:20:09.532  2769  2769 D RILD    : **RILd param count=1**
10-23 17:20:09.545  2769  2769 E RILD    : dlopen failed: dlopen failed: library "[email protected]" not found
10-23 17:20:09.552     0     0 I init    : Service 'ril-daemon' (pid 2769) exited with status 1
10-23 17:20:09.552     0     0 I init    : Sending signal 9 to service 'ril-daemon' (pid 2769) process group...
10-23 17:20:09.552     0     0 I libprocessgroup: Successfully killed process cgroup uid 1001 pid 2769 in 0ms
10-23 17:20:14.454     0     0 I init    : starting service 'ril-daemon'...
10-23 17:20:14.532  2770  2770 D RILD    : **RIL Daemon Started**
10-23 17:20:14.536  2770  2770 D RILD    : **RILd param count=1**
10-23 17:20:14.544  2770  2770 E RILD    : dlopen failed: dlopen failed: library "[email protected]" not found
10-23 17:20:14.552     0     0 I init    : Service 'ril-daemon' (pid 2770) exited with status 1
10-23 17:20:14.553     0     0 I init    : Sending signal 9 to service 'ril-daemon' (pid 2770) process group..

AOSP won't build, missing out/target/product/pioneer/obj/KERNEL_OBJ/usr

• following instructions at https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/build-aosp-android-android-11-0-0/
• obtained AOSP with repo init -u https://android.googlesource.com/platform/manifest -b android-11.0.0_r4
• using branch android-11.0.0_r4 of sonyxperiadev/local_manifests, placed in .repo
• selected aosp_h4113-eng during lunch

make fails with:

============================================
FAILED: ninja: 'out/target/product/pioneer/obj/KERNEL_OBJ/usr', needed by 'out/target/product/pioneer/obj/EXECUTABLES/ipacm_intermediates/IPACM_Main.o', missing and no known rule to make it
05:23:07 ninja failed with: exit status 1

Support for H3123

Following Sony AOSP build guide and Xperia XA2 H3123 is not listed. H3113 and H3123 have different LTE bands. Please add H3123 to repo.