Comments (6)
Can you run ctest
with the -VV
option to obtain a more verbose output? Thanks!
from urdfdom.
$ ctest -VV
UpdateCTestConfiguration from :/usr/ports/misc/urdfdom/work/.build/DartConfiguration.tcl
Parse Config file:/usr/ports/misc/urdfdom/work/.build/DartConfiguration.tcl
UpdateCTestConfiguration from :/usr/ports/misc/urdfdom/work/.build/DartConfiguration.tcl
Parse Config file:/usr/ports/misc/urdfdom/work/.build/DartConfiguration.tcl
Test project /usr/ports/misc/urdfdom/work/.build
Constructing a list of tests
Done constructing a list of tests
Updating test list for fixtures
Added 0 tests to meet fixture requirements
Checking test dependency graph...
Checking test dependency graph end
test 1
Start 1: urdf_double_convert
1: Test command: /usr/ports/misc/urdfdom/work/.build/bin/urdf_double_convert "--gtest_output=xml:/usr/ports/misc/urdfdom/work/.build/test_results/urdf_double_convert.xml"
1: Environment variables:
1: LC_ALL=C
1: Test timeout computed to be: 240
1: Running main() from gtest_main.cc
1: [==========] Running 2 tests from 1 test case.
1: [----------] Global test environment set-up.
1: [----------] 2 tests from URDF_DOUBLE_CONVERT
1: [ RUN ] URDF_DOUBLE_CONVERT.test_successful_conversion
1: [ OK ] URDF_DOUBLE_CONVERT.test_successful_conversion (0 ms)
1: [ RUN ] URDF_DOUBLE_CONVERT.test_failed_conversion
1: [ OK ] URDF_DOUBLE_CONVERT.test_failed_conversion (0 ms)
1: [----------] 2 tests from URDF_DOUBLE_CONVERT (0 ms total)
1:
1: [----------] Global test environment tear-down
1: [==========] 2 tests from 1 test case ran. (0 ms total)
1: [ PASSED ] 2 tests.
1/4 Test #1: urdf_double_convert .............. Passed 0.00 sec
test 2
Start 2: urdf_double_convert_locale
2: Test command: /usr/ports/misc/urdfdom/work/.build/bin/urdf_double_convert "--gtest_output=xml:/usr/ports/misc/urdfdom/work/.build/test_results/urdf_double_convert_locale.xml"
2: Environment variables:
2: LC_ALL=nl_NL.UTF-8
2: Test timeout computed to be: 240
2: Running main() from gtest_main.cc
2: [==========] Running 2 tests from 1 test case.
2: [----------] Global test environment set-up.
2: [----------] 2 tests from URDF_DOUBLE_CONVERT
2: [ RUN ] URDF_DOUBLE_CONVERT.test_successful_conversion
2: [ OK ] URDF_DOUBLE_CONVERT.test_successful_conversion (0 ms)
2: [ RUN ] URDF_DOUBLE_CONVERT.test_failed_conversion
2: [ OK ] URDF_DOUBLE_CONVERT.test_failed_conversion (1 ms)
2: [----------] 2 tests from URDF_DOUBLE_CONVERT (1 ms total)
2:
2: [----------] Global test environment tear-down
2: [==========] 2 tests from 1 test case ran. (1 ms total)
2: [ PASSED ] 2 tests.
2/4 Test #2: urdf_double_convert_locale ....... Passed 0.00 sec
test 3
Start 3: urdf_unit_test
3: Test command: /usr/ports/misc/urdfdom/work/.build/bin/urdf_unit_test "--gtest_output=xml:/usr/ports/misc/urdfdom/work/.build/test_results/urdf_unit_test.xml"
3: Environment variables:
3: LC_ALL=C
3: Test timeout computed to be: 240
3: [==========] Running 9 tests from 1 test case.
3: [----------] Global test environment set-up.
3: [----------] 9 tests from URDF_UNIT_TEST
3: [ RUN ] URDF_UNIT_TEST.test_rotation_get_set_rpy_idempotent
3:
3: before x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
3: after x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
3: ok 1
3:
3: before x: 0.5 y: -0.5 z: 0.500000022 w: 0.499999978 roll: 0 pitch: -1.57079633 yaw: 1.57079633
3: after x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
3: ok 1
3: [ OK ] URDF_UNIT_TEST.test_rotation_get_set_rpy_idempotent (1 ms)
3: [ RUN ] URDF_UNIT_TEST.test_vector3_simple
3: [ OK ] URDF_UNIT_TEST.test_vector3_simple (0 ms)
3: [ RUN ] URDF_UNIT_TEST.test_vector3_bad_string
3: [ OK ] URDF_UNIT_TEST.test_vector3_bad_string (0 ms)
3: [ RUN ] URDF_UNIT_TEST.test_vector3_invalid_number
3: [ OK ] URDF_UNIT_TEST.test_vector3_invalid_number (0 ms)
3: [ RUN ] URDF_UNIT_TEST.test_vector3_not_enough_numbers
3: [ OK ] URDF_UNIT_TEST.test_vector3_not_enough_numbers (0 ms)
3: [ RUN ] URDF_UNIT_TEST.test_vector3_too_many_numbers
3: [ OK ] URDF_UNIT_TEST.test_vector3_too_many_numbers (0 ms)
3: [ RUN ] URDF_UNIT_TEST.parse_joint_doubles
3: [ OK ] URDF_UNIT_TEST.parse_joint_doubles (0 ms)
3: [ RUN ] URDF_UNIT_TEST.parse_link_doubles
3/4 Test #3: urdf_unit_test ...................***Exception: SegFault 0.00 sec
test 4
Start 4: urdf_unit_test_locale
4: Test command: /usr/ports/misc/urdfdom/work/.build/bin/urdf_unit_test "--gtest_output=xml:/usr/ports/misc/urdfdom/work/.build/test_results/urdf_unit_test_locale.xml"
4: Environment variables:
4: LC_ALL=nl_NL.UTF-8
4: Test timeout computed to be: 240
4: [==========] Running 9 tests from 1 test case.
4: [----------] Global test environment set-up.
4: [----------] 9 tests from URDF_UNIT_TEST
4: [ RUN ] URDF_UNIT_TEST.test_rotation_get_set_rpy_idempotent
4:
4: before x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
4: after x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
4: ok 1
4:
4: before x: 0.5 y: -0.5 z: 0.500000022 w: 0.499999978 roll: 0 pitch: -1.57079633 yaw: 1.57079633
4: after x: 0.5 y: -0.5 z: 0.5 w: 0.5 roll: 0 pitch: -1.57079633 yaw: 1.57079633
4: ok 1
4: [ OK ] URDF_UNIT_TEST.test_rotation_get_set_rpy_idempotent (2 ms)
4: [ RUN ] URDF_UNIT_TEST.test_vector3_simple
4: [ OK ] URDF_UNIT_TEST.test_vector3_simple (0 ms)
4: [ RUN ] URDF_UNIT_TEST.test_vector3_bad_string
4: [ OK ] URDF_UNIT_TEST.test_vector3_bad_string (0 ms)
4: [ RUN ] URDF_UNIT_TEST.test_vector3_invalid_number
4: [ OK ] URDF_UNIT_TEST.test_vector3_invalid_number (0 ms)
4: [ RUN ] URDF_UNIT_TEST.test_vector3_not_enough_numbers
4: [ OK ] URDF_UNIT_TEST.test_vector3_not_enough_numbers (0 ms)
4: [ RUN ] URDF_UNIT_TEST.test_vector3_too_many_numbers
4: [ OK ] URDF_UNIT_TEST.test_vector3_too_many_numbers (0 ms)
4: [ RUN ] URDF_UNIT_TEST.parse_joint_doubles
4: [ OK ] URDF_UNIT_TEST.parse_joint_doubles (0 ms)
4: [ RUN ] URDF_UNIT_TEST.parse_link_doubles
4/4 Test #4: urdf_unit_test_locale ............***Exception: SegFault 0.01 sec
50% tests passed, 2 tests failed out of 4
Total Test time (real) = 0.02 sec
The following tests FAILED:
3 - urdf_unit_test (SEGFAULT)
4 - urdf_unit_test_locale (SEGFAULT)
Errors while running CTest
from urdfdom.
Which version TinyXML
are you using? Is TIXML_USE_STL
defined when you compiled TinyXML?
from urdfdom.
It picks the older version tinyxml-2.6.2_2
, and not the newer one: tinyxml2-6.2.0,1
.
TIXML_USE_STL
isn't defined.
from urdfdom.
Despite the names, tinyxml
and tinyxml2
are libraries with different public APIs that can be installed side by side. Switching from one to another requires changing the code, and at the moment urdfdom is just compatibly with tinyxml
(see #113).
I was thinking that perhaps an ABI mismatch of some kind was causing the segfault, but if TIXML_USE_STL
is not defined neither in compiling tinyxml, neither for compiling urdfdom
and urdfdom_headers
, then I am not sure what could be causing the segmentation fault.
from urdfdom.
There's been no response here for years, so I'm going to close this out. Please feel free to reopen if you are still having problems.
from urdfdom.
Related Issues (20)
- Using wrong headers HOT 2
- Deprecation warning on urdfdom_parser with Clang HOT 2
- check_urdf: no loop detection
- Branch urdfdom for Galactic HOT 5
- Usage of `version` attribute in `robot` xml-node HOT 2
- [cmake] urdf_LIBRARIES is still wrong HOT 2
- Feature request: check_urdf should be able to read from std_in HOT 2
- parseJointLimits() does not parse acceleration limits
- Joint limits (vel, effort) are checked even when the joint is continuous type.
- Build Status link in README.md is broken HOT 2
- Use tinyxml2 instead of tinyxml HOT 3
- Remove tinyxml2 from public API HOT 2
- Cannot parse capsule error HOT 1
- Fixed joints parse limits but not axis
- Add support for quaternion in URDF HOT 3
- Removing console_bridge for Logging HOT 4
- support export URDF HOT 1
- Don't use (outdated) self-provided gtest version (especially if another version is installed already) HOT 7
- libtinyxml absolute path in the cmake export target files HOT 1
- CMake 3.30: urdfdom_parser fails to build HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from urdfdom.