qba667 / flyplusi6x Goto Github PK

Hi!

Is there any chance you can do it for the X based on the plain FS-i6 1.7.6 firmware?
Sadly this firmware based on 1.7.5. firmware, wich got too slow telemetry update :(

Or can you say, witch lines i need to modify to update the sensor values faster?

Thank you!

First of all, thanks for the great work you did :)

As the title reads, I can't get the RSSI Info on my Flightcontroller.

Last try I flashed the original Firmware from 2017 on my Remote.
After that I did the factory reset and restartet the remote and flashed your altered Firmware on to it.
When I take a look into the Firmware Version on the remote it says "FLYSKY FS-i6X 1.0 Apr 05 2018". Since I had done the Factory Reset I had to switch all my AUX switches to active again and set the AUX Channels to 10 and connected them to all their switches.

SWA -> AUX 1
SWB -> AUX 2
... you get the idea.

The binding to my receiver was lost so I first updated my Betaflight to the current 3.3.1 stable version and then rebound the receiver with the remote.

Everything worked as it did before all the updates, but i still couldnt get the RSSI which should show on AUX Channel 7 as far as i understood. I also typed in the 2 CLI Commands to set the max Channels to 14 and the RSSI to Channel 11, saved and rebooted. With the "get" commands on the CLI i was able to confirm that the settings have been accepted.

None of the AUX Channels on the Receivertab in Betaflight showed any behaviour that would look like some RSSI Level. Everything was stable on 1000 or 1500 or 2000. Even when my girlfriend walked around with the remote Outside etc.

I still went to the OSD and activated the RSSI display but it constantly shows 0 since AUX 7 is on level 1000.

Hope you can help me.

Here are some screenshots of my Betaflight settings

http://pasteall.org/pic/2a3db6ddee2d886c497c173343efcb43
http://pasteall.org/pic/b8a2d9d11aa16c685af93005a9cfc5ed
http://pasteall.org/pic/f7f2ab17ac34559b676600a0c39f8d3e
http://pasteall.org/pic/4260b8de323d24dbdb0d7a975f116b45
http://pasteall.org/pic/8bf2219c9f489ee9630fa08dc8019173

I am using the FS-i6x Remote with the X6B receiver. My FC is an MatekF405 with Betaflight 3.3.1

Hi qba667,
can you somehow turn off this whole snr/rssi calculating and sending and use only telemetry sensors part of the firmware?

When we use FBL system, ex, ZYX S2, Brain.. we have limited channel ranges from -60 to 60. It is for ch1, ch2, ch6. We cant fly with FBL and DFC heli, it is really a frustrated limitation and a shame that Flysky did it in that version. What I know model I6 and i10 is not affected.

I can't access FLYSKY FS-i6x STM32F0xx cube project, can you upload it as open source? thank you

Today I installed the new firmware on my unit and tested it in sims (with vJoySerialFeeder, reading serial data directly from an IBUS receiver). Immediately I felt that there's something different. It was not very pronounced but it was felt. It felt like there's some kind of delay and some jerkiness.

Then I restored the original firmware and everything was back to normal.

I proceeded with some more detailed tests - I tried with two different receiver - IA6B and FS82 - the results were the same so problem in the rx was ruled out.

Then I took hex dumps of the IBUS protocol with both firmwares and after I visualized the data it became quite clear - with the new firmware the data seems to freeze for several frames - the frames still arrive at regular intervals (about 8ms) but several consecutive frames have the same data.

I tried to make similar movements in both cases - first some smooth movement of both sticks and then fast oscillations of roll stick.

This is with orginal firmware:

and with the patched one:

Here are the hex dumps, ODS files and also the python script I used:
ibus dumps.zip

I have no idea how the firmware works so it's hard to guess what the problem could be. On first look it seems that the TX mcu is experiencing delays and it is sending updates at lower rate. But then why the IBUS frames continue to arrive very quickly? Or the IBUS frames are generated by the RX independent of when radio frames arrive?

Best~

Hi, thx for your great work.
I have updated my FX-i6x by using the updater Integrated.1.0.42.1560. It is success to find 12ch in the Display. However, I cannot active the 11 or 12ch the Menu> System> Aux switches. The max ch in Aux switches menu I can active is 10.
Please help me how to active the 11, 12... aux switches,
Regards

It is possible to have 30 or 40 models in memory ?.

For example right now I use servo for landing gear in helicopter, it working with one speed. I cannot slow down the servo speed in app.

Hey!

I've just updated my fs-i6x with the custom firmware. It came with 1.0.45.1427 software from the factory, so I restored the factory settings and flashed the new firmware.

I have the RSSI output on SBUS correctly, and everything works great, except now I don't have a beep when the transmitter loses connection with the reciever, neither when it get's back.

I can set the RSSI in betaflight that when it detects a failsafe it also zeros the RSSI value, so I can see the 0% RSSI on the OSD, but an audible signal is still useful, especially if I'm flying FPV.

It is possible to update with new orginal firmware from FlySky 20-Sep-2019 ?

I don't know English what is causing this problem
FsI6X

https://rc-fpv.pl/viewtopic.php?p=585355#p585355

version: Integrated.1.0.42.1560
released 2018-04-05

Channel 8 is holding the throttle at 50% when Sw D is active regardless of any config changes.

Hey friends,

Does someone know if it will work?
My goal is to input the ppm signal from the Fatshark Trinity head tracker which has a standard cycle (8CH PPM, 20ms)
or rapid cycle (3CH PPM, 8ms). and to output the overall ppm of the remote by the ppm out pad to Frsky X9D Tx via the trainer port?

Добрый день спасибо за прошивки и проделанную работу. Вопрос в прошивке FS-I6X. bin передатчик начинает подымать сигнал тривоги через 40 метров как
исправить?

Great work you had on i6 firmware.
I would love to have working flight timer for i6X also :)