nicholasseward / conceptforge Goto Github PK

Complete the assembly instructions and a getting started guide.

There is a $135 open bounty on this issue. Add to the bounty at Bountysource.

worked off the BOM and ended up missing HUB SCREW (yes should have looked in the STL folder lol) - please add to BOM

Peter

Hi Nicholas
I would love to contribute in your monorail project.
Do you intend to make it open source? Thanks

Complete the assembly instructions and a getting started guide.

There is a $147 open bounty on this issue. Add to the bounty at Bountysource.

The BOM specifies m2x10mm screws, which have 4mm of grab when subtracting the 6mm of endstop thickness. However, since these holes are discretized by layer height, they tend to be a bit loose, whereas holes printed vertically (like the guitar tuner screws) tend to be a bit tight; for any number of polygons, the holes will be slightly smaller than a perfect circle.

Anyhow, I think m2x16mm screws are more appropriate. They reduce the chance of stripping on the formed threads. In the case of the endstops, if there's any printed clearance (like on my printed Motor Arms), the extra threads are great to help lock down the endstops. You really want those tight!

Build a machine that would use nothing but PLA for the whole robot with the exception of string, limit switches, steppers, controller board, and the hot end. I am dubbing the concept BOB Simpson (BOltless and Bearingless).

There is a $148 open bounty on this issue. Add to the bounty at Bountysource.

i am IP banned on any address and also email domains gmail and outlook are banned. its been this way for years? last time i checked, a few years go, it seemed to point to a blacklist manager who was asking people to please stop using their service. now it gives me this and a message about being IP banned:

The e-mail domain gmail.com you have used for your e-mail address has been blocked because it is blacklisted. For details please see http://www.surbl.org/surbl-analysis?host=gmail.com.