misa198 / dell-latitude-5570-hackintosh

DELL Latitude E5570 hackintosh Opencore

Hi there, welcome to my GitHub profile 👋

My name is Thanh Vu.

I work as a Software Engineer. Connect with me, check out this links:

• 🐦 Twitter
• 🏢 LinkedIn
• 📝 My Blog

Support me

dell-latitude-5570-hackintosh's Issues

Big Sur Connectivity Issues

I am using a Dell Latitude E5570 i7-6600U HD520 igpu. I connect to the wifi, but it says No Internet. It does not recognize ethernet. What should I do?

DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC

Laptop keeps waking up every hour with darkwake on Monterey, played with pmset settings, nothing worked..

2022-11-16 08:16:48 +0100 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:100%) 0 secs
2022-11-16 08:16:48 +0100 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=disabled Using AC (Charge:100%) 3603 secs
2022-11-16 09:16:51 +0100 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:100%) 45 secs
2022-11-16 09:17:36 +0100 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=disabled Using AC (Charge:100%) 3602 secs
2022-11-16 10:17:38 +0100 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:100%) 0 secs
2022-11-16 10:17:38 +0100 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=disabled Using AC (Charge:100%) 3602 secs
2022-11-16 11:17:40 +0100 DarkWake DarkWake from Normal Sleep [CDN] : due to RTC/Maintenance Using AC (Charge:100%) 46 secs
2022-11-16 11:18:26 +0100 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=disabled Using AC (Charge:100%) 3601 secs

HDMI Hot-plug problem

I have tested your EFI but I got 1 problem.
When I plug HDMI cable, the screen went to black, and show up but very flirt (Up to 30fps).
I found that when I want to use HDMI, I need to sleep my laptop first, and wake and able to use HDMI again without flirt.
Any idea to fix this problem?

HDMI not working

Hi,
I've updated my laptop from my own opencore config to yours so I was able to update succesfully to MacOS Monterey.
But since then my HDMI port doesn't work anymore. You have any guesses what it could be? Or how it can be fixed?

I am using the MacBookPro13,3 I believe. You are using the MacBookPro13,2 in your config.
And also do you have succesfull HDMI working?

Wont work on achi mode

It doesnt detect my nvme drive so i set it to achi which causes it to bootloop however its on catalina but that isnt the problem because catalina base system boots just fine on in raid so i dont know what to do

Bluetooth not working with Sonoma

I have the same adapter as in your config and the bluetooth shows off but wireless is working fine
Sonoma 14.2.1

Fixing Brightness function (BRT6 Method) for Ventura

You can try this BRT6 Patch, this one is worked for me in this machine:
This one can be used for earlier macOS version (Monterey, Big Sur, ...)

Method (BRT6, 2, NotSerialized)
{
            If (_OSI ("Darwin"))
            {
                If ((Arg0 == One))
                {
                    Notify (^LCD, 0x86)
                    Notify (^^LPCB.PS2K, 0x10)
                    Notify (^^LPCB.PS2K, 0x0366)
                }

                If ((Arg0 & 0x02))
                {
                    Notify (^LCD, 0x87)
                    Notify (^^LPCB.PS2K, 0x20)
                    Notify (^^LPCB.PS2K, 0x0365)
                }
            }
            Else
            {
                \_SB.PCI0.GFX0.BRTX (Arg0, Arg1)
            }
}

Also adding this patch to config.plist:
Comment: BRT6,2 to BRTX,2
Find: 14204252543602
Replace: 14204252545802

If there is any problem, try resetting nvram before creating a new issue.

VGA Port is this model is supported!

VGA Port in Skylake and newer are supported, so VGA Port you need to map it with DP (DisplayPort) value
I have tested it on my Clover R5142 and it worked!
framebuffer-con2-type: 00040000

Brightness can patched via BRT6

Can you try my BRT6 patched SSDT?
It's native via F11/F12, without using Karabiner Mapping Keyboard.
Rename in ACPI:
BRT6: 14204252 543602
XRT6: 14204252 545802
SSDT-BRT6.aml.zip

When new update?

Is this repo ok for dell 5470 i7 6820hq

Can i install this efi for
Dell E5470 i7 6820hq
8gb ram
256gb m.2
Display 1080p

Like your hardware specs

Hello, which version bios are u using and bios setting.

Catalina No OS Found After Install

I installed Catalina with this EFI and after it installed, it restarted and there were 4 options EFI,macOS installer,Recovery,reset NVram. I hit macOS installer and the apple logo shows up, and then it restarts and boots back to where I started.

Turbo boost not work

• Specs:

1. i7-6820HQ - Turbo Boost up to 3.6 GHz

• Description: Turbo boost không hoạt động, xung nhịp tối đa đạt đến 2.7 GHz. Tốc độ build app giảm rõ rệt so với Linux (có nhận turbo boost)

Battery Issue

Battery Status is working but it shows "Service Recommended".
From the bios, the battery appears to be at 95% of its life cycle but OSX (Monterey), seems not to recognize the battery correctly:
(IMG lang is Italian).

Discord

Only the right speaker works when talking on discord.

Back side USB Port & Bluetooth not working on macOS Ventura

Hey,
as the title says, the backside USB Port and Bluetooth aren't working. I tried to fix it and noticed that Hackintool can't detect the USB Ports. I checked for the ACPI Names which are
SS04 - Backside USB Port
HS07 - Bluetooth

I tried anything to get them to be visible but I can't get it to work. They also aren't visible in the USBMap Tool

Can somebody help me please?😅🙏🏻

Pre-built EFI?

Can you publish a release so that I can download it easier?

After the installation is complete. Cannot boot into OC, auto reboot.

My configuration: Dell E5570/i7-6820HQ/AMD R370

Use airportitlwm work

On Ventura, AirportItlwm work
Just download the beta version for Ventura
here
and disable itlwm

Trackpad issue in macOS Monterey 12.2.1

EN: I have updated from macOS 11.6.2 to macOS 12.2.1 and I have trackpad issue.
It stopped working after using several minutes, I need to force restart computer and changed VoodooPS2 (v1.0.6) from @SkyrilHD into default Acidanthera's VoodooPS2. Do you have this issue on your hack?
Log: panic.log.txt

VN: Sau khi update macOS từ 11.6.2 lên 12.2.1 và phát hiện lỗi trackpad. Tầm dùng được vài phút là bị dính panic nên phải tắt nóng máy đi rồi khởi động lại mới dùng tiếp được. Bạn có gặp lỗi này trên máy của b ko?

E5570 i7

CPU: i7-6820HQ
GPU: Radeon R7 M370
iGPU: HD530
WiFi: AC 8260
LAN: I219-LM

Will this work? Would the R7 Work?
Thank in advance.

Is SSDT-XOSI required?

Hi, I'm confused whether SSDT-XOSI is needed. As noted in the Dortania's guide, they're related to I2C Trackpad, while E5570 is PS2.