lwfinger / rtw8852cu Goto Github PK
View Code? Open in Web Editor NEWLicense: GNU General Public License v2.0
rtw8852cu's People
Contributors
Stargazers
Watchers
Forkers
yaoxingwei1 enlinea777 rmandrad meetabs ilaoyao vitor-alves dragon-mlj thatwileyguy realganfan lelemka0 tsinguirtw8852cu's Issues
6ghz
I got a Tenda 6e router.
I tested an AX210 and the 8832CU under Windows and Linux.
With unified bands (same SID):
The AX210 behaved with no hassles under all systems and chose the 6ghz band as a preference.
The 8832CU could not connect. Under Windows, as soon as it is authenticated, the adapter disconnects from devices. Then it becomes available again, it tries to connect again, and the cycle repeats. Sometimes it can connect to the 2.4Ghz band, sometimes it will just say, "cannot connect to this network". After a while, the system becomes unstable and needs a forced reboot. Under Linux, same thing, aside that it won't see the 6ghz band (I set up the country db). It doesn't become unstable, but it just doesn't work.
With 2.4ghz and 5ghz unified, while 6ghz on its own SID:
Under Windows it connects with occasional adapter disappearance as before. But it mostly works.
Under Linux, still no way to see the 6ghz band.
Conclusion: Unified networks will use WPA3 for all of them. The AX210 seems to handle this. The 8832CU does not handle it. It needs separate SIDs for WPA2 and WPA3.
Maybe I cannot find the way to enable region with the 8832CU. But with the AX210 it worked, so I wonder what's wrong.
This project can fail to compile on AARCH64 devices, such as Raspberry Pi 3B+ with RaspberryOS 64
I have a Raspberry Pi 3B+, git cloned this project, and want to compile it. But it encountered a failure, prompting an unsupported architecture. So, how do I deal with this error?
Thanks。
request for dkms version
Hi, could you make a dkms version?
I can make Arch packages (AUR) for both.
Monitor mode cannot capture 802.11 management frame packets
I modified the CONFIG_WIFI_MONITOR=y in the Makefile file so that the driver supports monitor mode. However, this cannot capture 802.11 management frame packets, such as RTS/CTS packets.
Is there something that isn't doing it right?
Seeing Two SSIDs in the AP mode for RTL8852CU
Right now I am trying to bring up this driver for USB based dongle RTL8852CU.
The module is working fine in the STA mode but when I am trying to configure this module as SoftAP by using hostapd, then I am observing the two SSID's with the same name with different MAC addresses.
Please find the hostapd configs are below -
logger_syslog=-1
logger_syslog_level=2
logger_stdout=0
logger_stdout_level=5
ap_isolate=1
ap_max_inactivity=30
disassoc_low_ack=1
interface=wlan0
driver=nl80211
channel=11
country_code=IN
ieee80211d=1
ieee80211h=1
beacon_int=200
supported_rates=120 180 240 360 480 540
basic_rates=120 180 240 360 480 540
g is needed, n is built on top of it
hw_mode=g
this enables the 802.11n speeds and capabilities ... You will also need to enable WMM for full HT functionality.
ieee80211n=1
Low priority / AC_BK = background
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=63
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
Normal priority / AC_BE = best effort
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=63
tx_queue_data2_cwmax=255
tx_queue_data2_burst=0
Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
High priority / AC_VI = video
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
Highest priority / AC_VO = voice
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
wmm_enabled=1
wme_enabled=1
Low priority / AC_BK = background
wmm_ac_bk_cwmin=6
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
Normal priority / AC_BE = best effort
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=6
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
High priority / AC_VI = video
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=4
wmm_ac_vi_cwmax=5
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
Highest priority / AC_VO = voice
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=3
wmm_ac_vo_cwmax=4
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
Enable 300 mbit
ht_capab=[SHORT-GI-20][SHORT-GI-40][HT40-][TX-STBC][RX-STBC12]
Set up some sane defaults:
For packets over $val bytes, activate Request to Send (RTS) / Clear to Send (CTS)
(CTS)
Defaults to the frame size = 2347
#rts_threshold=1200
For packets over $val bytes, fragment the packet into multiple frames. Half
the Ethernet MTU (usually =1500) would normally be a good starting point, but we have only
WiFi
Defaults to the frame size = 2346
#fragm_threshold=1198
Short preamble, improves performance IFF all STAs support it
Defaults to $val=0 (off)
preamble=1
DTIM (delivery traffic information message) period (range 1..255):
number of beacons between DTIMs (1 = every beacon includes DTIM element)
Note that multicast traffic is only sent with each DTIM. We could improve
this by setting =1, but then STAs may never sleep again (drains power!)
Defaults to $val=2 (once every two beacons)
dtim_period=3
Wireless network management (WNM)
wnm_sleep_mode=1
bss_transition=1
#macaddr_acl=0
#accept_mac_file=/etc/hostapd.accept
#deny_mac_file=/etc/hostapd.deny
ssid=Test-2G
ctrl_interface=/var/run/hostapd
wpa=2
wpa_passphrase=diegheim9Aiqu4oomoo2hish9ohKae
wpa_key_mgmt=WPA-PSK-SHA256 WPA-PSK
wpa_pairwise=CCMP
Note: I didn't enable the Concurrent mode in the driver
I need your valuable suggestions here
Help: can't get RTL8832CU to work
Hello. I have a Comfast CF-972AX just purchased from China, with its chip RTL8832CU.
Links:
- http://szcomfast.com/index.php?m=content&c=index&a=show&catid=13&id=235
- https://es.aliexpress.com/item/1005006115177010.html?gatewayAdapt=glo2esp
lsusb:
Bus 003 Device 032: ID 0bda:c832 Realtek Semiconductor Corp. 802.11ax WLAN Adapter
After searching some on the Internet, however I still can't make it work. FYI the pages I browsed:
- morrownr/88x2bu-20210702#150
- https://lore.kernel.org/all/CAMzNfvPtmGyXDV9m-whhptH5n3xJL1-ZPNed3yrkXG-DSF==+w@mail.gmail.com/
Now after compiling and installing the 8852cu driver (also ejecting the CD), iw can recognize it. But still I cannot assign an interface name to it, giving an error: no such device (-19):
~ ❯ iw list | rg Wiphy
Wiphy phy11
Wiphy phy0
~ ❯ sudo iw phy phy11 interface add rtl type managed
command failed: No such device (-19)(phy0 is my on-board intel NIC.)
Is there something I'm doing wrong?
Thanks.
`sudo iw phy phy11 info`
Wiphy phy11
wiphy index: 11
max # scan SSIDs: 9
max scan IEs length: 2304 bytes
max # sched scan SSIDs: 0
max # match sets: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Device supports AP-side u-APSD.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CMAC (00-0f-ac:6)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
* CCMP-256 (00-0f-ac:10)
* GMAC-128 (00-0f-ac:11)
* GMAC-256 (00-0f-ac:12)
* CMAC-256 (00-0f-ac:13)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
Band 1:
Capabilities: 0x19e3
RX LDPC
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15
HE Iftypes: AP
HE MAC Capabilities (0x0001120a0060):
+HTC HE Supported
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x02701a58fdc0270e91b900):
HE40/2.4GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation Rx: 3
Rx HE MU PPDU from Non-AP STA
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Ng = 16 SU Feedback
Ng = 16 MU Feedback
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE Iftypes: managed
HE MAC Capabilities (0x0801120a8060):
+HTC HE Supported
Trigger Frame MAC Padding Duration: 2
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x02701a1ffd00270e91bd00):
HE40/2.4GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation: 3
DCM Max NSS Tx: 1
DCM Max Constellation Rx: 3
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
TX 1024-QAM
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412.0 MHz [1] (20.0 dBm)
* 2417.0 MHz [2] (20.0 dBm)
* 2422.0 MHz [3] (20.0 dBm)
* 2427.0 MHz [4] (20.0 dBm)
* 2432.0 MHz [5] (20.0 dBm)
* 2437.0 MHz [6] (20.0 dBm)
* 2442.0 MHz [7] (20.0 dBm)
* 2447.0 MHz [8] (20.0 dBm)
* 2452.0 MHz [9] (20.0 dBm)
* 2457.0 MHz [10] (20.0 dBm)
* 2462.0 MHz [11] (20.0 dBm)
* 2467.0 MHz [12] (20.0 dBm)
* 2472.0 MHz [13] (20.0 dBm)
* 2484.0 MHz [14] (disabled)
Band 2:
Capabilities: 0x19e3
RX LDPC
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT Max RX data rate: 300 Mbps
HT TX/RX MCS rate indexes supported: 0-15
VHT Capabilities (0x03c011f5):
Max MPDU length: 7991
Supported Channel Width: 160 MHz
RX LDPC
short GI (80 MHz)
short GI (160/80+80 MHz)
TX STBC
SU Beamformee
+HTC-VHT
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 1733 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: MCS 0-9
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 1733 Mbps
VHT extended NSS: supported
HE Iftypes: AP
HE MAC Capabilities (0x0001120a0060):
+HTC HE Supported
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x0c701a58fdc0270e91b900):
HE40/HE80/5GHz
HE160/5GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation Rx: 3
Rx HE MU PPDU from Non-AP STA
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Ng = 16 SU Feedback
Ng = 16 MU Feedback
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE RX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE Iftypes: managed
HE MAC Capabilities (0x0801120a8060):
+HTC HE Supported
Trigger Frame MAC Padding Duration: 2
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x0c701a1ffd00270e91bd00):
HE40/HE80/5GHz
HE160/5GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation: 3
DCM Max NSS Tx: 1
DCM Max Constellation Rx: 3
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
TX 1024-QAM
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE RX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180.0 MHz [36] (20.0 dBm)
* 5200.0 MHz [40] (20.0 dBm)
* 5220.0 MHz [44] (20.0 dBm)
* 5240.0 MHz [48] (20.0 dBm)
* 5260.0 MHz [52] (20.0 dBm)
* 5280.0 MHz [56] (20.0 dBm)
* 5300.0 MHz [60] (20.0 dBm)
* 5320.0 MHz [64] (20.0 dBm)
* 5500.0 MHz [100] (20.0 dBm)
* 5520.0 MHz [104] (20.0 dBm)
* 5540.0 MHz [108] (20.0 dBm)
* 5560.0 MHz [112] (20.0 dBm)
* 5580.0 MHz [116] (20.0 dBm)
* 5600.0 MHz [120] (20.0 dBm)
* 5620.0 MHz [124] (20.0 dBm)
* 5640.0 MHz [128] (20.0 dBm)
* 5660.0 MHz [132] (20.0 dBm)
* 5680.0 MHz [136] (20.0 dBm)
* 5700.0 MHz [140] (20.0 dBm)
* 5720.0 MHz [144] (20.0 dBm)
* 5745.0 MHz [149] (20.0 dBm)
* 5765.0 MHz [153] (20.0 dBm)
* 5785.0 MHz [157] (20.0 dBm)
* 5805.0 MHz [161] (20.0 dBm)
* 5825.0 MHz [165] (20.0 dBm)
* 5845.0 MHz [169] (20.0 dBm)
* 5865.0 MHz [173] (20.0 dBm)
* 5885.0 MHz [177] (20.0 dBm)
Band 4:
HE Iftypes: AP
HE MAC Capabilities (0x0001120a0060):
+HTC HE Supported
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x0c701a58fdc0270e91b900):
HE40/HE80/5GHz
HE160/5GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation Rx: 3
Rx HE MU PPDU from Non-AP STA
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Ng = 16 SU Feedback
Ng = 16 MU Feedback
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE RX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE Iftypes: managed
HE MAC Capabilities (0x0801120a8060):
+HTC HE Supported
Trigger Frame MAC Padding Duration: 2
All Ack
BSR
OM Control
Maximum A-MPDU Length Exponent: 2
OPS
A-MSDU in A-MPDU
HE PHY Capabilities: (0x0c701a1ffd00270e91bd00):
HE40/HE80/5GHz
HE160/5GHz
Device Class: 1
LDPC Coding in Payload
HE SU PPDU with 1x HE-LTF and 0.8us GI
NDP with 4x HE-LTF and 3.2us GI
STBC Rx <= 80MHz
Doppler Tx
DCM Max Constellation: 3
DCM Max NSS Tx: 1
DCM Max Constellation Rx: 3
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Codebook Size SU Feedback
Codebook Size MU Feedback
Triggered SU Beamforming Feedback
Partial Bandwidth Extended Range
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 1
HE ER SU PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 1x HE-LTF 0.8us GI
DCM Max BW: 2
Longer Than 16HE SIG-B OFDM Symbols
TX 1024-QAM
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE RX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5955.0 MHz [1] (20.0 dBm)
* 5975.0 MHz [5] (20.0 dBm)
* 5995.0 MHz [9] (20.0 dBm)
* 6015.0 MHz [13] (20.0 dBm)
* 6035.0 MHz [17] (20.0 dBm)
* 6055.0 MHz [21] (20.0 dBm)
* 6075.0 MHz [25] (20.0 dBm)
* 6095.0 MHz [29] (20.0 dBm)
* 6115.0 MHz [33] (20.0 dBm)
* 6135.0 MHz [37] (20.0 dBm)
* 6155.0 MHz [41] (20.0 dBm)
* 6175.0 MHz [45] (20.0 dBm)
* 6195.0 MHz [49] (20.0 dBm)
* 6215.0 MHz [53] (20.0 dBm)
* 6235.0 MHz [57] (20.0 dBm)
* 6255.0 MHz [61] (20.0 dBm)
* 6275.0 MHz [65] (20.0 dBm)
* 6295.0 MHz [69] (20.0 dBm)
* 6315.0 MHz [73] (20.0 dBm)
* 6335.0 MHz [77] (20.0 dBm)
* 6355.0 MHz [81] (20.0 dBm)
* 6375.0 MHz [85] (20.0 dBm)
* 6395.0 MHz [89] (20.0 dBm)
* 6415.0 MHz [93] (20.0 dBm)
* 6435.0 MHz [97] (20.0 dBm)
* 6455.0 MHz [101] (20.0 dBm)
* 6475.0 MHz [105] (20.0 dBm)
* 6495.0 MHz [109] (20.0 dBm)
* 6515.0 MHz [113] (20.0 dBm)
* 6535.0 MHz [117] (20.0 dBm)
* 6555.0 MHz [121] (20.0 dBm)
* 6575.0 MHz [125] (20.0 dBm)
* 6595.0 MHz [129] (20.0 dBm)
* 6615.0 MHz [133] (20.0 dBm)
* 6635.0 MHz [137] (20.0 dBm)
* 6655.0 MHz [141] (20.0 dBm)
* 6675.0 MHz [145] (20.0 dBm)
* 6695.0 MHz [149] (20.0 dBm)
* 6715.0 MHz [153] (20.0 dBm)
* 6735.0 MHz [157] (20.0 dBm)
* 6755.0 MHz [161] (20.0 dBm)
* 6775.0 MHz [165] (20.0 dBm)
* 6795.0 MHz [169] (20.0 dBm)
* 6815.0 MHz [173] (20.0 dBm)
* 6835.0 MHz [177] (20.0 dBm)
* 6855.0 MHz [181] (20.0 dBm)
* 6875.0 MHz [185] (20.0 dBm)
* 6895.0 MHz [189] (20.0 dBm)
* 6915.0 MHz [193] (20.0 dBm)
* 6935.0 MHz [197] (20.0 dBm)
* 6955.0 MHz [201] (20.0 dBm)
* 6975.0 MHz [205] (20.0 dBm)
* 6995.0 MHz [209] (20.0 dBm)
* 7015.0 MHz [213] (20.0 dBm)
* 7035.0 MHz [217] (20.0 dBm)
* 7055.0 MHz [221] (20.0 dBm)
* 7075.0 MHz [225] (20.0 dBm)
* 7095.0 MHz [229] (20.0 dBm)
* 7115.0 MHz [233] (20.0 dBm)
* 7135.0 MHz [237] (disabled)
* 7155.0 MHz [241] (disabled)
* 7175.0 MHz [245] (disabled)
* 7195.0 MHz [249] (disabled)
* 7215.0 MHz [253] (disabled)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* set_bss
* join_ibss
* set_pmksa
* del_pmksa
* flush_pmksa
* remain_on_channel
* frame
* set_channel
* connect
* disconnect
* channel_switch
WoWLAN support:
* wake up on anything (device continues operating normally)
software interface modes (can always be added):
interface combinations are not supported
Device supports SAE with AUTHENTICATE command
Device supports scan flush.
Device supports randomizing MAC-addr in scans.
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0xd0
* managed: 0x40 0xb0 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
Supported extended features:
uname -a:
Linux bczhc-arch 6.7.0-rc7-modified-g861deac3b092-dirty #73 SMP PREEMPT_DYNAMIC Mon Dec 25 19:41:58 CST 2023 x86_64 GNU/Linux
Unable to Utilize 6E bands and 160mhz channel widths
Bringing this issue to the source: USB-WiFi/issues/408.
Can confirm that I can connect with the rtw8852cu driver to any 2.4ghz and 5ghz SSID but not any 6ghz SSIDs. I know that this MSI AXE5400 can connect on Windows at those speeds just fine. Please let me know if you need additional screenshots or supporting information.
REGULATORY_IGNORE_STALE_KICKOFF error
I got back my dongle and tested the new fix. It won't compile.
usr/src/rtw8852cu/os_dep/linux/wifi_regd.c: In function ‘rtw_regd_init’:
/usr/src/rtw8852cu/os_dep/linux/wifi_regd.c:1271:36: error: ‘REGULATORY_IGNORE_STALE_KICKOFF’ undeclared (first use in this function)
1271 | wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/src/rtw8852cu/os_dep/linux/wifi_regd.c:1271:36: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [scripts/Makefile.build:252: /usr/src/rtw8852cu/os_dep/linux/wifi_regd.o] Error 1
make[1]: *** [Makefile:2032: /usr/src/rtw8852cu] Error 2
make: *** [Makefile:705: modules] Error 2
Is this the right driver?
Sorry for the general question, but I have a device ID that I can't map to a Realtek chipset or driver. This is my best guess, so I'm looking for a sanity check before I add the device ID to the driver and see if it behaves.
Here's what I know:
TP-Link AXE5400 (tri-band)
also called TP-Link Archer TXE70UH
USB 35bc:0502
Linux reports...
Manufacturer: Realtek
Product: 802.11ax WLAN Adapter
Just from Realtek and Tri-Band, this seems like the right chipset and driver? Should I try adding the device ID or is there some other way I should try to confirm which IC is in use? (and is there a way to do that short of prying the dongle apart?)
Is it a mistake?
I am not know about compile, the 273 line in ioctl_cfg80211.c:
cfg80211_ch_switch_notify(adapter->pnetdev, &chdef, 0); raised an error: too few arguments to function ‘cfg80211_ch_switch_notify’.
It semms need a zero : cfg80211_ch_switch_notify(adapter->pnetdev, &chdef, 0, 0);
error: '_adapter' has no member named 'wdev_data'?????
...
Unable to compile the driver with "CONFIG_RTW_MESH"
We want to enable the MESH interface support for this wlan adapter but we are getting lot of build errors due to unknown types, implicit declarations, members are not defined in the structs.
Do you have the latest version driver code from RTK?
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.