Transforms the way you troubleshoot your microcontroller projects.
ℹ️ Make sure you have the latest ESP32 boards by Espressif Systems in your Board Manager
- Install the GPIOViewer Library with the Arduino IDE Library Manager or Download the latest release and install the library in the Arduino IDE :
Sketch > Include Library > Add ZIP Library...
- Download ESPAsyncWebServer and install the library in the Arduino IDE
Sketch > Include Library > Add ZIP Library...
- Install the the AsyncTCP using the Arduino IDE Library Manager.
Add the following to your platformio.ini file:
lib_deps =
https://github.com/dvarrel/AsyncTCP.git
https://github.com/me-no-dev/ESPAsyncWebServer.git
https://github.com/thelastoutpostworkshop/gpio_viewer.git
ℹ️ You can also use get examples provided with the library in the Arduino IDE through the menu
File > Examples > GPIOViewer
ℹ️ You only need to include the library, declare the GPIOViewer and call begin() at the end of your setup, and that's it!
ℹ️ The URL to the web GPIO viewer application is printed on the serial monitor
#include <gpio_viewer.h> // Must me the first include in your project
GPIOViewer gpio_viewer;
void setup()
{
Serial.begin(115200);
// Comment the next line, If your code aleady include connection to Wifi in mode WIFI_STA (WIFI_AP and WIFI_AP_STA are not supported)
gpio_viewer.connectToWifi("Your SSID network", "Your WiFi Password");
// gpio_viewer.setPort(5555); // You can set the http port, if not set default port is 8080
// Your own setup code start here
// Must be at the end of your setup
// gpio_viewer.setSamplingInterval(25); // You can set the sampling interval in ms, if not set default is 100ms
gpio_viewer.begin();
}
ℹ️ The default HTTP port is 8080 and default sampling interval is 100ms
ℹ️ Wifi must be in mode WIFI_STA (WIFI_AP and WIFI_AP_STA are not supported)
- Digital
- Analog
- PWM
- The GPIOViewer Library adds 50 KB to your projects.
- No worries! All the assets (ex. board images) of the web application are loaded from github pages and don't add to the size of your projects.
- Ensure you have a strong Wifi signal with a good transfer rate. 25ms sampling interval works great on Wifi 6 with 125 Mbps.
- If you get "ERROR: Too many messages queued" on the Serial Monitor, this means the data is not read fast enough by the web application. The data will still be displayed, but with some latency. Reduce the sampling interval or try to improve your Wifi performance.
Contributors are welcomed! If you want to submit pull requests, here is how you can do it.
ℹ️ You can use the "Generic View" in the GPIO Web Application to see GPIO pin activites live even if your board image is not listed
ℹ️ You can also request an ESP32 board image addition by creating a new issue.