glodroidcommunity / pine64-pinephone Goto Github PK

I recently installed GloDroid (LineageOS/Android 13) to my PinePhone and have run into some features that are not working.

• Automatic brightness
• Reading external storage
  - Camera

For the automatic brightness, I believe my model is capable of this and should have the sensor for it, I can even find the option for it in the settings. However, I can only see it in search options and if I select it nothing happens.

External storage is my largest problem. No matter what brand or format of card I use, nothing shows up in stock or third-party storage apps or settings. I even cleaned a card and only made it's primary partition to see if I would be prompted to format it but there is no such option for me. What strikes me most about this is that I sued a microSD to flash the OS to EMMC successfully...

As far as the camera goes, I could live without it, but I would prefer not to and I know it is functional. I do however expect this issue to be the least clear on how to resolve. I don't know if it's a settings issue or a missing package?

I'm successfully running the latest version of GloDroid on my PinePhone using the SD card image. Since I also have the keyboard case I wanted to try if that worked too, but as far as I can see it doesn't do anything. Is the keyboard case not supported yet, or is there additional steps I can take to get GloDroid to recognise it?

Issues:

With Android 14 getting the phone to recognize the SIM at boot is challenging. However when it does recognize the SIM the modem stays active as long as the phone doesn't go into sleep mode. Once the phone sleeps the modem dies, the phone still shows the signal bar and the SIM is accessible in the settings, like the modem is still active but it's not. And there is no way I know of how to re-start the radio/modem service in the active interface.

The workaround is to reboot but that only works for the first active session, then it dies again.

In any of the latest builds, opening the three dot menu in the bottom (or top, depending on configuration) right corner of Firefox causes visual distortion on the address bar and renders the display unable to update, though interacting with certain areas of the display still trigger system sounds which implies the phone is still responsive. The only way I've found to recover from this state is to hard-reboot the device.

The phone freezes on a black screen and then will become completely unresponsive. I have to remove the battery to restart the phone. I am running the newest version of glodroid lineage

I try to install glodroid in my pinephone on mmc.when I run the install script all seems ok I get a message to remove the recovery sdcard and reboot the phone.t I get a message on terminal waiting any device and the led on phone is blinking red and is turn off.i use another data cable not the original

The phone should not disconnect the USB connection when connected to a PC. The PC will continue to try and re-connect and fails.

I read through the implemented features, and saw that mobile data wasn't implemented yet and that aligns with what I'm seeing, but also I'm not able to text. I have a Verizon SIM in my pine phone and I tried texting myself to test, and it says that the message wasn't sent. In the settings in network and internet it says calls and SMS Verizon temporarily unavailable.

Turning off the USB debugging gives windows access to the Pinephone's USB, options settings->connected devices->USB. I suspect most do not know how to enable the developer options by tapping 7 times on the build number in the settings->about.

It may be helpful if USB debugging was disabled by default. See my post on the pine64 forum.

The phone recognizes one SIM card which is inserted but never shows the pin input. When calling a number, it says "exit plane mode" even though WiFi is up and running fine. Same for Ireland and Germany SIM card. Both card do work also inside the PinePhone when running another OS like Manjaro...any ideas?

Hello my Sd card slot on my pinephone broke and I rely on flashing operating systems through towboot. will there ever be support for being able to flash the os using tow boots volume up feature. pretty please

By any chance could you provide a compiled zip of GloDroid with the serial console disabled to improve performance?