Ember.js flavored changesets, inspired by Ecto. To install:
ember install ember-changeset
Watch a free video intro presented by EmberScreencasts
The idea behind a changeset is simple: it represents a set of valid changes to be applied onto any Object (Ember.Object
, DS.Model
, POJOs, etc). Each change is tested against an optional validation, and if valid, the change is stored and applied when executed.
Given Ember's Data Down, Actions Up (DDAU) approach, a changeset is more appropriate compared to implicit 2 way bindings. Other validation libraries only validate a property after it is set on an Object, which means that your Object can enter an invalid state.
ember-changeset
only allows valid changes to be set, so your Objects will never become invalid (assuming you have 100% validation coverage). Additionally, this addon is designed to be un-opinionated about your choice of form and/or validation library, so you can easily integrate it into an existing solution.
The simplest way to incorporate validations is to use ember-changeset-validations
, a companion addon to this one. It has a simple mental model, and there are no Observers or CPs involved – just pure functions.
See also the plugins section for addons that extend ember-changeset
.
let changeset = new Changeset(user, validatorFn);
user.get('firstName'); // "Michael"
user.get('lastName'); // "Bolton"
changeset.set('firstName', 'Jim');
changeset.set('lastName', 'B');
changeset.get('isInvalid'); // true
changeset.get('errors'); // [{ key: 'lastName', validation: 'too short', value: 'B' }]
changeset.set('lastName', 'Bob');
changeset.get('isValid'); // true
user.get('firstName'); // "Michael"
user.get('lastName'); // "Bolton"
changeset.save(); // sets and saves valid changes on the user
user.get('firstName'); // "Jim"
user.get('lastName'); // "Bob"
First, create a new Changeset
using the changeset
helper or through JavaScript:
import Ember from 'ember';
import Changeset from 'ember-changeset';
const { Component, get } = Ember;
export default Component.extend({
init() {
this._super(...arguments);
let model = get(this, 'model');
let validator = get(this, 'validate');
this.changeset = new Changeset(model, validator);
}
});
The helper receives any Object (including DS.Model
, Ember.Object
, or even POJOs) and an optional validator
action. If a validator
is passed into the helper, the changeset will attempt to call that function when a value changes.
// application/controller.js
import Ember from 'ember';
const { Controller } = Ember;
export default Controller.extend({
actions: {
submit(changeset) {
return changeset.save();
},
rollback(changeset) {
return changeset.rollback();
},
validate({ key, newValue, oldValue, changes, content }) {
// lookup a validator function on your favorite validation library
// should return a Boolean
}
}
});
Then, in your favorite form library, simply pass in the changeset
in place of the original model.
In the above example, when the input changes, only the changeset's internal values are updated. When the submit button is clicked, the changes are only executed if all changes are valid.
On rollback, all changes are dropped and the underlying Object is left untouched.
The default behavior of Changeset
is to automatically validate a field when it is set. Automatic validation can be disabled by passing skipValidate
as on option when creating a changeset.
let changeset = new Changeset(model, validatorFn, validationMap, { skipValidate: true });
Be sure to call validate()
on the changeset
before saving or committing changes.
- Properties
- Methods
Returns the error object.
{
firstName: {
value: 'Jim',
validation: 'First name must be greater than 7 characters'
}
}
You can use this property to locate a single error:
Returns the change object.
{
firstName: 'Jim'
}
You can use this property to locate a single change:
Returns an array of errors. If your validate
function returns a non-boolean value, it is added here as the validation
property.
[
{
key: 'firstName',
value: 'Jim',
validation: 'First name must be greater than 7 characters'
}
]
You can use this property to render a list of errors:
Returns an array of changes to be executed. Only valid changes will be stored on this property.
[
{
key: 'firstName',
value: 'Jim'
}
]
You can use this property to render a list of changes:
Returns a Boolean value of the changeset's validity.
get(changeset, 'isValid'); // true
You can use this property in the template:
Returns a Boolean value of the changeset's (in)validity.
get(changeset, 'isInvalid'); // true
You can use this property in the template:
Returns a Boolean value of the changeset's state. A pristine changeset is one with no changes.
get(changeset, 'isPristine'); // true
If changes present on the changeset are equal to the content's, this will return true
. However, note that key/value pairs in the list of changes must all be present and equal on the content, but not vice versa:
let user = { name: 'Bobby', age: 21 };
changeset.set('name', 'Bobby');
changeset.get('isPristine'); // true
changeset.set('foo', 'bar');
changeset.get('isPristine'); // false
Returns a Boolean value of the changeset's state. A dirty changeset is one with changes.
get(changeset, 'isDirty'); // true
Exactly the same semantics as Ember.get
. This proxies first to the error value, the changed value, and finally to the underlying Object.
get(changeset, 'firstName'); // "Jim"
set(changeset, 'firstName', 'Billy'); // "Billy"
get(changeset, 'firstName'); // "Billy"
You can use and bind this property in the template:
Exactly the same semantics as Ember.set
. This stores the change on the changeset.
set(changeset, 'firstName', 'Milton'); // "Milton"
You can use and bind this property in the template:
Any updates on this value will only store the change on the changeset, even with 2 way binding.
Provides a function to run before emitting changes to the model. The callback function must return a hash in the same shape:
changeset.prepare((changes) => {
// changes = { firstName: "Jim", lastName: "Bob" };
let modified = {};
for (let key in changes) {
modified[underscore(key)] = changes[key];
}
// don't forget to return, the original changes object is not mutated
return modified; // { first_name: "Jim", last_name: "Bob" }
}); // returns changeset
The callback function is not validated – if you modify a value, it is your responsibility to ensure that it is valid.
Returns the changeset.
Applies the valid changes to the underlying Object.
changeset.execute(); // returns changeset
Note that executing the changeset will not remove the internal list of changes - instead, you should do so explicitly with rollback
or save
if that is desired.
Executes changes, then proxies to the underlying Object's save
method, if one exists. If it does, it expects the method to return a Promise
.
changeset.save(); // returns Promise
The save
method will also remove the internal list of changes if the save
is successful.
Merges 2 changesets and returns a new changeset with the same underlying content and validator as the origin. Both changesets must point to the same underlying object. For example:
let changesetA = new Changeset(user, validatorFn);
let changesetB = new Changeset(user, validatorFn);
changesetA.set('firstName', 'Jim');
changesetB.set('firstName', 'Jimmy');
changesetB.set('lastName', 'Fallon');
let changesetC = changesetA.merge(changesetB);
changesetC.execute();
user.get('firstName'); // "Jimmy"
user.get('lastName'); // "Fallon"
Note that both changesets A
and B
are not destroyed by the merge, so you might want to call destroy()
on them to avoid memory leaks.
Rollsback all unsaved changes and resets all errors.
changeset.rollback(); // returns changeset
Validates all or a single field on the changeset. This will also validate the property on the underlying object, and is a useful method if you require the changeset to validate immediately on render. Requires a validation map to be passed in when the changeset is first instantiated.
user.set('lastName', 'B');
changeset.get('isValid'); // true
changeset.validate('lastName'); // validate single field; returns Promise
changeset.validate().then(() => {
changeset.get('isInvalid'); // true
changeset.get('errors'); // [{ key: 'lastName', validation: 'too short', value: 'B' }]
}); // validate all fields; returns Promise
Manually add an error to the changeset.
changeset.addError('email', {
value: '[email protected]',
validation: 'Email already taken'
});
// shortcut
changeset.addError('email', 'Email already taken');
Adding an error manually does not require any special setup. The error will be cleared if the value for the key
is subsequently set to a valid value. Adding an error will overwrite any existing error or change for key
.
If using the shortcut method, the value in the changeset will be used as the value for the error.
Manually push errors to the changeset.
changeset.pushErrors('age', 'Too short', 'Not a valid number', 'Must be greater than 18');
This is compatible with ember-changeset-validations
, and allows you to either add a new error with multiple validations messages or push to an existing array of validation messages.
Creates a snapshot of the changeset's errors and changes. This can be used to restore
the changeset at a later time.
let snapshot = changeset.snapshot(); // snapshot
Restores a snapshot of changes and errors to the changeset. This overrides existing changes and errors.
let user = { name: 'Adam' };
let changeset = new Changeset(user, validatorFn);
changeset.set('name', 'Jim Bob');
let snapshot = changeset.snapshot();
changeset.set('name', 'Potato');
changeset.restore(snapshot);
changeset.get('name'); // "Jim Bob"
Unlike Ecto.Changeset.cast
, cast
will take an array of allowed keys and remove unwanted keys off of the changeset.
let allowed = ['name', 'password']
let changeset = new Changeset(user, validatorFn);
changeset.set('name', 'Jim Bob');
changeset.set('unwantedProp', 123);
changeset.get('unwantedProp'); // 123
changeset.cast(allowed); // returns changeset
changeset.get('unwantedProp'); // undefined
For example, this method can be used to only allow specified changes through prior to saving. This is especially useful if you also setup a schema
object for your model (using Ember Data), which can then be exported and used as a list of allowed keys:
// models/user.js
export const schema = {
name: attr('string'),
password: attr('string')
};
export default Model.extend(schema);
// controllers/foo.js
import { schema } from '../models/user';
const { keys } = Object;
export default Controller.extend({
// ...
actions: {
save(changeset) {
return changeset
.cast(keys(schema))
.save();
}
}
});
To use with your favorite validation library, you should create a custom validator
action to be passed into the changeset:
// application/controller.js
import Ember from 'ember';
const { Controller } = Ember;
export default Controller.extend({
actions: {
validate({ key, newValue, oldValue, changes, content }) {
// lookup a validator function on your favorite validation library
// should return a Boolean
}
}
});
Your action will receive a single POJO containing the key
, newValue
, oldValue
, a one way reference to changes
, and the original object content
.
When you run changeset.save()
, under the hood this executes the changeset, and then runs the save method on your original content object, passing its return value back to you. You are then free to use this result to add additional errors to the changeset via the addError
method, if applicable.
For example, if you are using an Ember Data model in your route, saving the changeset will save the model. If the save rejects, Ember Data will add errors to the model for you. To copy the model errors over to your changeset, add a handler like this:
changeset.save()
.then(() => { /* ... */ })
.catch(() => {
get(this, 'model.errors').forEach(({ attribute, message }) => {
changeset.pushErrors(attribute, message);
});
});
If you're uncertain whether or not you're dealing with a Changeset
, you can use the isChangeset
util.
import isChangeset from 'ember-changeset/utils/is-changeset';
if (isChangeset(model)) {
model.execute();
// other changeset-specific code...
}
ember-changeset-validations
- Pure, functional validations without CPs or Observersember-changeset-cp-validations
- Work withember-cp-validations
ember-changeset-hofs
- Higher-order validation functionsember-bootstrap-changeset-validations
- Adds support for changeset validations toember-bootstrap
git clone
this repositorynpm install
bower install
ember server
- Visit your app at http://localhost:4200.
npm test
(Runsember try:testall
to test your addon against multiple Ember versions)ember test
ember test --server
ember build
For more information on using ember-cli, visit http://ember-cli.com/.