coolsnowwolf / lede Goto Github PK

Lean's LEDE source

License: Other

Makefile 3.78% Awk 0.01% Shell 1.38% C 91.55% Assembly 0.26% C++ 0.06% M4 0.22% CMake 0.01% Perl 0.47% Lex 0.01% Yacc 0.02% Python 0.08% Roff 1.88% HTML 0.16% Lua 0.11% Batchfile 0.01%

lede lua openwrt-feed openwrt-package openwrt-zh-cn

lede's People

Contributors

Stargazers

Watchers

Forkers

baotutianxia qiyue tomaer utsource hunterhe xspoco victor2002 jndxhuxiehang houxn22 aicoliu yb2746 lmguy ouguochong prozyy mstalent ywb94 aml123 menglishui revin1990 chicbrother wyz1010 x140g birdjack zaion520 gw826943555 qyh214 mouse1130 heimi tkot mc-linhx flwh ziqqqq zhuhao0922 lvusyy sxx1314 marlunzhang vjkqxz ykglove v2r0 dreamwrt chickenlove xiaozhangv amethystwoo leo783x huanm ctw8989 itslucas clion007 thirder xiaoguich melanprince trig-targ jack338c loarland liyvhg g93920079 zalexy luckingshine arthurleescut xiaoqclub wwyy456258 xiumie kaowul yi1992 aileiys bwb0101 jinagko yanglh-ack maxjove paulyang620 mousewolf peterxutong lonelylose vvvvvgh hzwjm rockxcn billxy gulangyu tossp knlvz madzhangqi blacksun1996 xingya771 aooom hotstu roseskygit snailzz tipdigg w796933 sirmix formylover isbarton amberismyshiba luckypoem monsterzzzz tacuar poyang620 cathywife daveleung hcg101

lede's Issues

R7.4 版本引导问题

编译的squashfs映像，第一次启动过程中，提示rootdisk overlay filesystem has not been formatted yet，然后卡住，需要按回车20次左右才能继续。

/root/lede/staging_dir/host/bin/tplink-safeloader -B ARCHERC9 -k /root/lede/build_dir/target-arm_cortex-a9_musl_eabi/linux-bcm53xx/tmp/lede-bcm53xx-tplink-archer-c9-v1-squashfs.bin.trx -r /root/lede/build_dir/target-arm_cortex-a9_musl_eabi/linux-bcm53xx/tmp/lede-bcm53xx-tplink-archer-c9-v1-squashfs.bin -j -o /root/lede/build_dir/target-arm_cortex-a9_musl_eabi/linux-bcm53xx/tmp/lede-bcm53xx-tplink-archer-c9-v1-squashfs.bin.new
file-system partition too big (more than 12582912 bytes): Success
make[5]: *** [/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/linux-bcm53xx/tmp/lede-bcm53xx-tplink-archer-c9-v1-squashfs.bin] Error 1
make[5]: *** Waiting for unfinished jobs....
file-system partition too big (more than 12582912 bytes): Success
make[5]: *** [/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/linux-bcm53xx/tmp/lede-bcm53xx-tplink-archer-c5-v2-squashfs.bin] Error 1
make[5]: Leaving directory /root/lede/target/linux/bcm53xx/image' make[4]: *** [install] Error 2 make[4]: Leaving directory /root/lede/target/linux/bcm53xx'

transmission 编译错误的问题 -- 官方的锅，修复方法如下

sudo apt-get install libglib2.0-dev

装上这个即可解决

一直编译出，小白一个也不知道是哪出了问题

一直严格按教程，二天都没编译成一个，换了好几个硬件环境也都同样，提示错误1，也在谷歌上找了资料，说是网络的问题，但是网格一直都是好的，也启动了SS服务，哪位老司机知道，麻烦引导。谢谢（用make V=99 2>&1 | tee build.log | grep -i error命令查出的红色字体不知道是什么提示）

IPSec和OpenVpn不能自启

newifi-D1问题汇总

1、刷机后重启起不来，要断电后才行；
2、没有刷中文，但是菜单里中英文混杂；
3、自带的tf卡无法挂载，已经安装了komd-mmc；

luci aria2 tr 菜单不显示

default-settings里面是把aria2 tr之类的单独放到一个名为 nas 的菜单下，这个菜单默认是没有的，所以导致aria2 tr 之类的菜单不能显示出来

路由器设置全局代理，可以下载代码了，但是后台进不去了...

路由器设置全局代理，可以下载代码了，可是路由器后台管理进不去了，咋办？
简直要疯了~

编译X86虚拟机用固件报错

/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909/src/options.c:301: undefined reference to __stack_chk_fail_local' options.o:/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909/src/options.c:61: more undefined references to __stack_chk_fail_local' follow
make[6]: *** [socket.so.3.0-rc1] Error 1

make[6]: Leaving directory `/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909/src'

make[5]: *** [linux] Error 2

make[5]: Leaving directory `/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909/src'

make[4]: *** [linux] Error 2

make[4]: Leaving directory `/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909'
make[3]: *** [/home/make/lede/build_dir/target-i386_pentium4_musl/luasocket-3.0-rc1-20130909/.built] Error 2

make[3]: Leaving directory `/home/make/lede/feeds/packages/lang/luasocket'

make[2]: *** [package/feeds/packages/luasocket/compile] Error 2

make[2]: Leaving directory `/home/make/lede'

make[1]: *** [/home/make/lede/staging_dir/target-i386_pentium4_musl/stamp/.package_compile] Error 2

make[1]: Leaving directo

准备编译成VMHD文件在虚拟机下使用

wrt1900ac v2 ，install -a的时候出现的。

WARNING: No feed for package 'libsqlite2' found, maybe it's already part of the standard packages?
WARNING: No feed for package 'flite' found, maybe it's already part of the stand ard packages?
WARNING: No feed for package 'libyuv' found, maybe it's already part of the stan dard packages?
WARNING: No feed for package 'libilbc' found, maybe it's already part of the sta ndard packages?
WARNING: No feed for package 'libmemcached' found, maybe it's already part of th e standard packages?
WARNING: No feed for package 'libsilk' found, maybe it's already part of the sta ndard packages?
WARNING: No feed for package 'libg7221' found, maybe it's already part of the st andard packages?
WARNING: No feed for package 'freeradius-client' found, maybe it's already part of the standard packages?
Installing package 'freeswitch-

(建议)希望能加入lede-modhostapd

请参见
https://forum.lede-project.org/t/how-to-automatically-disconnect-client-when-rssi-is-low/6352

https://github.com/mk248/lede-modhostapd

可以让无线有自动剔除弱信号设备的功能，对所有设备有效

希望大神能加到固件里去，非常感谢

K3屏幕控制除了加上k3screenctl还要哪些包

请教k3screenctrl怎么编译

我编译了k3固件，但是没有找到k3screenctrl。请教怎么弄？

编译错误，求解决

checking for mempcpy... (cached) yes
checking for memrchr... yes
checking whether mkdir handles trailing slash... yes
checking whether mkdir handles trailing dot... yes
checking for mkdtemp... yes
checking whether mkfifo rejects trailing slashes... yes
checking whether mknod can create fifo without root privileges... configure: error: in /root/lede/build_dir/host/tar-1.29': configure: error: you should not run configure as root (set FORCE_UNSAFE_CONFIGURE=1 in environment to bypass this check) See config.log' for more details
Makefile:30: recipe for target '/root/lede/build_dir/host/tar-1.29/.configured' failed
make[3]: *** [/root/lede/build_dir/host/tar-1.29/.configured] Error 1
make[3]: Leaving directory '/root/lede/tools/tar'
tools/Makefile:148: recipe for target 'tools/tar/compile' failed
make[2]: *** [tools/tar/compile] Error 2
make[2]: Leaving directory '/root/lede'
tools/Makefile:146: recipe for target '/root/lede/staging_dir/target-mips_24kc_musl/stamp/.tools_compile_yynyyyyynyyyyynyynnyyyyyyyyyyyyyyyyyyyynyynynyyyynny' failed
make[1]: *** [/root/lede/staging_dir/target-mips_24kc_musl/stamp/.tools_compile_yynyyyyynyyyyynyynnyyyyyyyyyyyyyyyyyyyynyynynyyyynny] Error 2
make[1]: Leaving directory '/root/lede'
/root/lede/include/toplevel.mk:207: recipe for target 'world' failed
make: *** [world] Error 2

wifi 2.4G无法搜索

编译昨天晚上最新今天下午无法搜索2.4G wifi,无线界面无法显示传输速率
重启路由后正常

使用finalspeed无速度

您好，我使用finalspeed连接ss速度几乎没有，lede 版本R7.3.2 。不使用finalspeed直接连接正常，不经过路由器直接拨号也正常。请问应该怎么设置lede

amule编译报错

不管装libwxbase2.8-dev libwxgtk2.8-dev还是libwxbase2.8-dbg libwxgtk2.8-dbg都不行
checking for File::Copy... ok
checking for the --with-toolkit option... will be automatically detected
checking for the --with-wxshared option... will be automatically detected
checking for the --with-wxdebug option... no
checking for the --with-wxversion option... will be automatically detected
checking for wx-config... /usr/bin/wx-config
checking for wxWidgets version >= 2.8.12 (--debug=no --unicode=yes)... no
configure: error:
The requested wxWidgets build couldn't be found.

The configuration you asked for aMule requires a wxWidgets
build with the following settings:
    --debug=no --unicode=yes
but such build is not available.

To see the wxWidgets builds available on this system, please use
'wx-config --list' command. To use the default build, returned by
'wx-config --selected-config', use the options with their 'auto'
default values.

If you still get this error, then check that 'wx-config' is
in path, the directory where wxWidgets libraries are installed
(returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
or equivalent variable and wxWidgets version is 2.8.12 or above.

make[3]: *** [/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/aMule-2.3.2/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
make[3]: Leaving directory /root/lede/package/lean/amule' make[2]: *** [package/lean/amule/compile] Error 2 make[2]: Leaving directory /root/lede'
make[1]: *** [/root/lede/staging_dir/target-arm_cortex-a9_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory `/root/lede'
make: *** [world] Error 2

mvebu平台编译问题

你好，

到了最后阶段，出现以下错误:

Image Name:
Created: Thu Sep 7 15:02:20 2017
Image Type: ARM Linux Script (uncompressed)
Data Size: 848 Bytes = 0.83 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 840 Bytes = 0.82 kB = 0.00 MB
rm -f /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/tmp/lede-mvebu-armada-388-clearfog-pro-sdcard.img.gz.boot
mkfs.fat -C /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/tmp/lede-mvebu-armada-388-clearfog-pro-sdcard.img.gz.boot 16384
mkfs.fat 4.1 (2017-01-24)
mcopy -i /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/tmp/lede-mvebu-armada-388-clearfog-pro-sdcard.img.gz.boot /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/linux-4.4.85/arch/arm/boot/dts/armada-388-clearfog-pro.dtb ::armada-388-clearfog-pro.dtb; mcopy -i /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/tmp/lede-mvebu-armada-388-clearfog-pro-sdcard.img.gz.boot /home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/linux-4.4.85/arch/arm/boot/dts/armada-388-clearfog-base.dtb ::armada-388-clearfog-base.dtb;
/home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/linux-4.4.85/arch/arm/boot/dts/armada-388-clearfog-pro.dtb: No such file or directory
/home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/linux-4.4.85/arch/arm/boot/dts/armada-388-clearfog-base.dtb: No such file or directory
make[5]: *** [/home/test/lede/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/linux-mvebu/tmp/lede-mvebu-armada-388-clearfog-pro-sdcard.img.gz] Error 1
make[5]: Leaving directory /home/test/lede/target/linux/mvebu/image' make[4]: *** [install] Error 2 make[4]: Leaving directory /home/test/lede/target/linux/mvebu'
make[3]: *** [install] Error 2
make[3]: Leaving directory /home/test/lede/target/linux' make[2]: *** [target/linux/install] Error 2 make[2]: Leaving directory /home/test/lede'
make[1]: *** [/home/test/lede/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/stamp/.target_install] Error 2
make[1]: Leaving directory `/home/test/lede'
make: *** [world] Error 2

请问应该怎么解决？

另外发现到了这步，/lede/bin/targets/mvebu/generic/下已经有固件生成，但是刷机后路由器无法启动，网卡获取不了IP地址，是因为前面的错误造成的吗？

谢谢！

请教一个编译技巧的问题

经过几天的折腾，终于能编译几种架构的固件了，再次感谢大神的源码！！
现在请教一个问题：
比如我在x86_64 下， make menuconfig 选好自己要的软件和包，生成了.config，我想把生成的.config设成x86_64下的默认配置，当我从其他架构转回x86_64编译，会自动用回自己的配置。要如何做到呢？
我不知如何表达，大概就是这个意思。谢谢！

SSR似乎不工作

服务器是auth_aes128_md5+aes-192-ctr, 无法连上，无论是刷了固件的X86路由，还是WRT路由器，都一样。

用C#客户端，手机apk，都没问题。之前用的路由器固件，比如K2P的潘多拉，都没问题。

尝试切换到其它协议，也一样

没有改源码，但是登录密码怎么自动设置了呢？

root，root
root，admin
都尝试了。。。还是登录不进去

ext4格式硬盘自动挂载后权限问题导致smb匿名用户没有权限访问，以下sdb1为目标盘

root@LEDE:/mnt# df -h -T
Filesystem Type Size Used Available Use% Mounted on
/dev/root squashfs 13.0M 13.0M 0 100% /rom
tmpfs tmpfs 250.3M 2.6M 247.7M 1% /tmp
/dev/ubi0_1 ubifs 14.0M 276.0K 13.0M 2% /overlay
overlayfs:/overlay overlay 14.0M 276.0K 13.0M 2% /
ubi1:syscfg ubifs 29.6M 276.0K 27.8M 1% /tmp/syscfg
tmpfs tmpfs 512.0K 0 512.0K 0% /dev
/dev/ubi1_0 ubifs 29.6M 276.0K 27.8M 1% /mnt/ubi1_0
tmpfs tmpfs 250.3M 2.6M 247.7M 1% /usr/share/adbyby/data
/dev/sda1 fuseblk 465.8G 156.5G 309.3G 34% /mnt/sda1
/dev/sdb1 ext4 14.1G 592.4M 12.7G 4% /mnt/sdb1
root@LEDE:/mnt# ls -al
drwxr-xr-x 1 root root 352 Sep 10 09:33 .
drwxr-xr-x 1 root root 544 Jun 9 05:02 ..
drwxrwxrwx 1 root root 12288 Sep 10 09:54 sda1
drwx------ 5 1000 1000 4096 Sep 9 22:35 sdb1
drwxr-xr-x 9 root root 848 Sep 7 16:40 ubi1_0
root@LEDE:/mnt#
smb设置里文件夹的权限已经是0777了，访问smb服务器，打开sdb1文件夹会提示没有权限访问，而sda1为NTFS系统，则正常读写。
作者的设计思路在插入硬盘后自动设置smb匿名共享，但是现在ext4文件系统挂载目录权限导致不能全自动了

建议加上zerotier

youku-yk1 网口无法使用

今天编译优酷路由宝youku-yk1 黑色版，32M flash。发现无法网口无法使用，System log如下：

Thu Sep 14 22:56:51 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Thu Sep 14 22:56:56 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Thu Sep 14 22:57:01 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Thu Sep 14 23:00:17 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Thu Sep 14 23:00:22 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.
Thu Sep 14 23:00:27 2017 daemon.err uhttpd[1807]: Failed to connect to the switch. Use the "list" command to see which switches are available.

SSR 怎么加chacha20算法

RT，几个客户端都已经配置了这个算法，不好改了

内存为何不自动释放

使用场景1:
硬件：k3，软件版本r6.1
通过samba读写文件时内存剩余13%左右。停止读写一段时间后，内存剩余回复到80%-90%
使用场景2:
硬件：k3，软件版本r7.3.3
通过samba读写文件时内存剩余13%左右。停止读写一段时间后，内存剩余还是13%左右。不释放。
是编译的时候有什么技巧？或者那里有问题呢？虽然不影响使用……

编译时出的错

我已经是全局fq了
这个是什么出错了？

7.3.2版本断网

7.3.2版本光猫已改192.168.2.1，但是路由器192.168.1.1重启后WAN口有IP无MAC地址，但是有线无线均断网

编译小米 mini nano 成功刷入，没有无线

请教一下L大，小白第一次编译lede，选择xiaomi mini nano，刷入后发现无线没有启动，工具栏里也没有无线选项。。

编译失败

ipset-lists 要选上，否则依赖解决不了，，，，这个要怎么选择呢？从哪里选择？

如何让luci概况显示cpu型号及温度

编译的时候需要选择那些项或修改什么才能让luci的概况显示cpu的型号及温度？

能否请教下怎么在LEDE snap里添加您的自定义包?

能否请教下怎么在LEDE snap里添加您的自定义包?
我拉进package后在make menuconfig菜单里死活找不到您的自定义包,不知为啥?

借用您的软件源码用在lede17.01.2，打了高通fast path补丁,编译卡壳

用了您的软件源码,package/lean, 自己克隆了lede17.01.2，也打了高通fast path补丁，下面是打补丁过程：
wget https://github.com/lede-project/source/commit/b87b4734c6e56fa45ec612350e2aa480ed2d8dd6.patch
patch -p1 < b87b4734c6e56fa45ec612350e2aa480ed2d8dd6.patch
（略过了4.9内核）
mv target/linux/generic/hack-4.4 patches-4.4
Kernel modules > Network Support >kmod-fast-classifier，kmod-shortcut-fe，kmod-shortcut-fe-cm选中
然后编译的过程报错如下：
make[3]: Entering directory /home/mltao/lede17.01.2/source/package/kernel/shortcut-fe' make -C "/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/linux-4.4.86" ARCH="arm" CROSS_COMPILE="arm-openwrt-linux-muslgnueabi-" SUBDIRS="/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe" EXTRA_CFLAGS="" modules make[4]: Entering directory /home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/linux-4.4.86'
CC [M] /home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.o
/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.c: In function 'sfe_ipv4_recv_udp':
/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.c:1366:5: error: 'struct sk_buff' has no member named 'fast_forwarded'
skb->fast_forwarded = 1;
^
/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.c: In function 'sfe_ipv4_recv_tcp':
/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.c:1909:5: error: 'struct sk_buff' has no member named 'fast_forwarded'
skb->fast_forwarded = 1;
^
make[5]: *** [/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/sfe_ipv4.o] Error 1
make[4]: *** [module/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe] Error 2
make[4]: Leaving directory /home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/linux-4.4.86' make[3]: *** [/home/mltao/lede17.01.2/source/build_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/linux-mvebu/shortcut-fe/.built] Error 2 make[3]: Leaving directory /home/mltao/lede17.01.2/source/package/kernel/shortcut-fe'
make[2]: *** [package/kernel/shortcut-fe/compile] Error 2
make[2]: Leaving directory /home/mltao/lede17.01.2/source' make[1]: *** [/home/mltao/lede17.01.2/source/staging_dir/target-arm_cortex-a9+vfpv3_musl-1.1.16_eabi/stamp/.package_compile] Error 2 make[1]: Leaving directory /home/mltao/lede17.01.2/source'
make: *** [world] 错误 2
请问怎么解决？谢谢！
来自石像鬼群：排排

编译错误，貌似pdnsd-1.2.9a-par，但没找到dl文件夹......

pdnsd-1.2.9a-par; '
Checking out files from the git repository...
Cloning into 'pdnsd-1.2.9a-par'...
fatal: unable to connect to gitorious.org:
gitorious.org[0: 64.13.172.37]: errno=Connection refused

Makefile:55: recipe for target '/home/zh/lede/dl/pdnsd-1.2.9a-par-a8e46ccba7b0fa2230d6c42ab6dcd92926f6c21d.tar.gz' failed
make[3]: *** [/home/zh/lede/dl/pdnsd-1.2.9a-par-a8e46ccba7b0fa2230d6c42ab6dcd92926f6c21d.tar.gz] Error 128
make[3]: Leaving directory '/home/zh/lede/package/lean/pdnsd-alt'
package/Makefile:109: recipe for target 'package/lean/pdnsd-alt/compile' failed
make[2]: *** [package/lean/pdnsd-alt/compile] Error 2
make[2]: Leaving directory '/home/zh/lede'
package/Makefile:105: recipe for target '/home/zh/lede/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile' failed
make[1]: *** [/home/zh/lede/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/zh/lede'
/home/zh/lede/include/toplevel.mk:207: recipe for target 'world' failed
make: *** [world] Error 2

编译错误you should not run configure as root (set FORCE_UNSAFE_CONFIGURE=1 in environment to bypass this check)

解决方法：

export FORCE_UNSAFE_CONFIGURE=1

EA8500编译失败，请告知原因

Build failed - please re-run with -j1 to see the real error message

怎么回事啊
@ub里已经挂蓝灯下载源码编译

/bin/mkdir -p '/home/lede/lede/staging_dir/host/bin'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/lib'
/usr/bin/install -c src/yacc '/home/lede/lede/staging_dir/host/bin'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/aclocal'
/usr/bin/install -c -m 644 lib/liby.a '/home/lede/lede/staging_dir/host/lib'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/doc/bison/examples/calc++'
/usr/bin/install -c -m 644 m4/bison-i18n.m4 '/home/lede/lede/staging_dir/host/share/aclocal'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/doc/bison'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/bison/m4sugar'
( cd '/home/lede/lede/staging_dir/host/lib' && ranlib liby.a )
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/bison'
/usr/bin/install -c -m 644 data/m4sugar/foreach.m4 data/m4sugar/m4sugar.m4 '/home/lede/lede/staging_dir/host/share/bison/m4sugar'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/bison/xslt'
/usr/bin/install -c -m 644 data/README data/bison.m4 data/c++-skel.m4 data/c++.m4 data/c-like.m4 data/c-skel.m4 data/c.m4 data/glr.c data/glr.cc data/java-skel.m4 data/java.m4 data/lalr1.cc data/lalr1.java data/location.cc data/stack.hh data/variant.hh data/yacc.c '/home/lede/lede/staging_dir/host/share/bison'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/doc/bison/examples/mfcalc'
/usr/bin/install -c -m 644 data/xslt/bison.xsl data/xslt/xml2dot.xsl data/xslt/xml2text.xsl data/xslt/xml2xhtml.xsl '/home/lede/lede/staging_dir/host/share/bison/xslt'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/doc/bison/examples/rpcalc'
/usr/bin/install -c -m 644 AUTHORS COPYING NEWS README THANKS TODO '/home/lede/lede/staging_dir/host/share/doc/bison'
/usr/bin/install -c -m 644 examples/calc++/calc++-driver.cc examples/calc++/calc++-driver.hh examples/calc++/calc++-scanner.ll examples/calc++/calc++.cc examples/calc++/calc++-parser.yy '/home/lede/lede/staging_dir/host/share/doc/bison/examples/calc++'
/usr/bin/install -c -m 644 examples/mfcalc/calc.h examples/mfcalc/mfcalc.y '/home/lede/lede/staging_dir/host/share/doc/bison/examples/mfcalc'
/usr/bin/install -c -m 644 examples/rpcalc/rpcalc.y '/home/lede/lede/staging_dir/host/share/doc/bison/examples/rpcalc'
src/bison --version >doc/bison.help.tmp
/bin/mkdir -p '/home/lede/lede/staging_dir/host/bin'
src/bison --help >>doc/bison.help.tmp
./build-aux/move-if-change doc/bison.help.tmp doc/bison.help
/usr/bin/install -c src/bison '/home/lede/lede/staging_dir/host/bin'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/man/man1'
/bin/mkdir -p '/home/lede/lede/staging_dir/host/share/info'
/usr/bin/install -c -m 644 ./doc/bison.info '/home/lede/lede/staging_dir/host/share/info'
/usr/bin/install -c -m 644 ./doc/bison.1 doc/yacc.1 '/home/lede/lede/staging_dir/host/share/man/man1'
install-info --info-dir='/home/lede/lede/staging_dir/host/share/info' '/home/lede/lede/staging_dir/host/share/info/bison.info'
This is not dpkg install-info anymore, but GNU install-info
See the man page for ginstall-info for command line arguments
make[7]: Leaving directory /home/lede/lede/build_dir/host/bison-3.0.4' make[6]: Leaving directory /home/lede/lede/build_dir/host/bison-3.0.4'
make[5]: Leaving directory /home/lede/lede/build_dir/host/bison-3.0.4' make[4]: Leaving directory /home/lede/lede/build_dir/host/bison-3.0.4'
install -m0755 ./scripts/yacc /home/lede/lede/staging_dir/host/bin/yacc
mkdir -p /home/lede/lede/staging_dir/host/stamp
touch /home/lede/lede/build_dir/host/bison-3.0.4/.built
touch /home/lede/lede/staging_dir/host/stamp/.bison_installed
make[3]: Leaving directory /home/lede/lede/tools/bison' make[2]: Leaving directory /home/lede/lede'
make[1]: *** [/home/lede/lede/staging_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/stamp/.tools_compile_yynyyyyynyyyyynyynnyyyynyyyyyyyyyyyyyyynyynynnyyynny] Error 2
make[1]: Leaving directory `/home/lede/lede'

编译后ssr 守护日志提示错误

[2017-09-09 14:15:00] ShadowsocksR No Problem.
udhcpc: no lease, failing
udhcpc: sending discover
udhcpc: started, v1.27.2
/etc/rc.common: line 144: /usr/bin/ip: not found
/etc/rc.common: line 144: /usr/bin/ip: not found
2017-09-09 14:00:09 INFO: obfs_param
2017-09-09 14:00:09 INFO: obfs plain
2017-09-09 14:00:09 INFO: method chacha20-ietf
2017-09-09 14:00:09 INFO: protocol_param
2017-09-09 14:00:09 INFO: protocol origin
/etc/rc.common: line 144: /usr/bin/ip: not found
/etc/rc.common: line 144: /usr/bin/ip: not found
udhcpc: no lease, failing
udhcpc: sending discover
udhcpc: started, v1.27.2
[2017-09-09 14:00:00] Problem decteted, restarting ShadowsocksR...

能否加个gnu镜像,每次下载都好慢

参考蝈蝈的 https://github.com/981213/lede_src/commit/2344fca488c0d240d59e19b0d407175608fe0bc7#diff-37328c94ce7b51e93bffc95f34083ae7

使用k3c的SDK编译错误

x86_64-linux-gnu-gcc -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -fno-exceptions -fno-rtti -fasynchronous-unwind-tables -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros -Wno-overlength-strings -DHAVE_CONFIG_H -o cc1 c/c-lang.o c-family/stub-objc.o attribs.o c/c-errors.o c/c-decl.o c/c-typeck.o c/c-convert.o c/c-aux-info.o c/c-objc-common.o c/c-parser.o c-family/c-common.o c-family/c-cppbuiltin.o c-family/c-dump.o c-family/c-format.o c-family/c-gimplify.o c-family/c-lex.o c-family/c-omp.o c-family/c-opts.o c-family/c-pch.o c-family/c-ppoutput.o c-family/c-pragma.o c-family/c-pretty-print.o c-family/c-semantics.o c-family/c-ada-spec.o tree-mudflap.o glibc-c.o
cc1-checksum.o libbackend.a main.o libcommon-target.a libcommon.a ../libcpp/libcpp.a ../libdecnumber/libdecnumber.a libcommon.a ../libcpp/libcpp.a ../libbacktrace/.libs/libbacktrace.a ../libiberty/libiberty.a ../libdecnumber/libdecnumber.a -lstdc++ -L/root/k3c/UGW-7.1.1/staging_dir/host/lib -L/root/k3c/UGW-7.1.1/staging_dir/host/lib -L/root/k3c/UGW-7.1.1/staging_dir/host/lib -lmpc -lmpfr -lgmp -rdynamic -ldl -lstdc++ -L../zlib -lz
main.o: file not recognized: File truncated
collect2: error: ld returned 1 exit status
make[5]: *** [cc1] Error 1
make[5]: Leaving directory /root/k3c/UGW-7.1.1/build_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/gcc-linaro-4.8-2014.04-initial/gcc' make[4]: *** [all-gcc] Error 2 make[4]: Leaving directory /root/k3c/UGW-7.1.1/build_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/gcc-linaro-4.8-2014.04-initial'

如下错误有啥影响？

cp -fpR /root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx /root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root.orig-bcm53xx
/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx/etc/init.d/arpbind: line 5: /lib/functions.sh: No such file or directory
/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx/etc/init.d/arpbind: line 6: /lib/functions/network.sh: No such file or directory
/etc/init.d/arpbind does not have a START or STOP value
/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx/etc/init.d/ssrpro: line 22: network_get_subnet: command not found
/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx/etc/init.d/ssrpro: line 23: network_get_ipaddr: command not found
Create '/root/lede/build_dir/target-arm_cortex-a9_musl_eabi/root-bcm53xx/etc/filesystems'.
Add 'ntfs-3g' to known filesystems.
./etc/init.d/arpbind: line 5: /lib/functions.sh: No such file or directory
./etc/init.d/arpbind: line 6: /lib/functions/network.sh: No such file or directory
/etc/init.d/arpbind does not have a START or STOP value
./etc/init.d/ssrpro: line 22: network_get_subnet: command not found
./etc/init.d/ssrpro: line 23: network_get_ipaddr: command not found

openvpn貌似不能自启

因为和两个依赖包冲突，删掉你的easy部分和openvpn-openssl中的config，然后不能自启

启动项是禁用的

openvpn , ipsec等等的启动项是禁用的

感谢大神，成功编译。请教固件版本，CPU型号怎么个性化？

感谢大神，成功编译。请教固件版本，cpu型号怎么个性化？

wndr4300编译的时候如何开启128M的ROM？

如题。

大神，編譯X86，保存掛載點出錯

首先感謝大神的無私貢獻，用您的源碼編譯X86_64，當保存掛載點就會出現下面的信息：
/usr/lib/lua/luci/util.lua:623: Unable to establish ubus connection stack traceback: [C]: in function 'assert' /usr/lib/lua/luci/util.lua:623: in function 'ubus' /usr/lib/lua/luci/dispatcher.lua:172: in function 'session_retrieve' /usr/lib/lua/luci/dispatcher.lua:382: in function 'dispatch' /usr/lib/lua/luci/dispatcher.lua:121: in function

官方的也一樣

linksys双固件切换源码被您下架了，希望加入

怎么把linksys双固件切换的源码删掉了？版权的原因吗？

你好，编译出错，请问错在哪里？

单独编译ipk失败，求指点

make menuconfig 选择M luci-app-adbyby-plus后
运行make package/lean/luci-adbyby-plus/compile V=99
出错，google半天不得其解，请大神指点
出错信息

make[1]: Entering directory '/home/daker/lede'
make[2]: Entering directory '/home/daker/lede/feeds/luci/modules/luci-base'
make[2]: Leaving directory '/home/daker/lede/feeds/luci/modules/luci-base'
make[2]: Entering directory '/home/daker/lede/package/libs/toolchain'
rm -rf /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc.installed /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc
mkdir -p /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc
install -d -m0755 /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc/lib /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc/usr/bin
cp -fpR /home/daker/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib/ld-musl-.so /home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc/lib/
cp: cannot stat '/home/daker/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl/lib/ld-musl-.so': No such file or directory
Makefile:618: recipe for target '/home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc.installed' failed
make[2]: *** [/home/daker/lede/build_dir/target-mips_24kc_musl/toolchain/.pkgdir/libc.installed] Error 1
make[2]: Leaving directory '/home/daker/lede/package/libs/toolchain'
package/Makefile:109: recipe for target 'package/libs/toolchain/compile' failed
make[1]: *** [package/libs/toolchain/compile] Error 2
make[1]: Leaving directory '/home/daker/lede'
/home/daker/lede/include/toplevel.mk:207: recipe for target 'package/lean/luci-app-adbyby-plus/compile' failed
make: *** [package/lean/luci-app-adbyby-plus/compile] Error 2

编译 K3 固件如果需要屏幕支持的，请注意加上 DEVMEM 的支持

DEVMEM=y 即可

不知道什么地方编译错误啦。

CMakeFiles/blobmsg_json-static.dir/build.make:62: recipe for target 'CMakeFiles/blobmsg_json-static.dir/blobmsg_json.c.o' failed
make[6]: *** [CMakeFiles/blobmsg_json-static.dir/blobmsg_json.c.o] Error 1
make[6]: Leaving directory '/home/caiyy/桌面/lede/build_dir/target-arm_cortex-a9_musl_eabi/libubox-2017-06-17-fd57eea9'
CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/blobmsg_json-static.dir/all' failed
make[5]: *** [CMakeFiles/blobmsg_json-static.dir/all] Error 2
make[5]: Leaving directory '/home/caiyy/桌面/lede/build_dir/target-arm_cortex-a9_musl_eabi/libubox-2017-06-17-fd57eea9'
Makefile:129: recipe for target 'all' failed
make[4]: *** [all] Error 2
make[4]: Leaving directory '/home/caiyy/桌面/lede/build_dir/target-arm_cortex-a9_musl_eabi/libubox-2017-06-17-fd57eea9'
Makefile:99: recipe for target '/home/caiyy/桌面/lede/build_dir/target-arm_cortex-a9_musl_eabi/libubox-2017-06-17-fd57eea9/.built' failed
make[3]: *** [/home/caiyy/桌面/lede/build_dir/target-arm_cortex-a9_musl_eabi/libubox-2017-06-17-fd57eea9/.built] Error 2
make[3]: Leaving directory '/home/caiyy/桌面/lede/package/libs/libubox'
package/Makefile:109: recipe for target 'package/libs/libubox/compile' failed
make[2]: *** [package/libs/libubox/compile] Error 2
make[2]: Leaving directory '/home/caiyy/桌面/lede'
package/Makefile:105: recipe for target '/home/caiyy/桌面/lede/staging_dir/target-arm_cortex-a9_musl_eabi/stamp/.package_compile' failed
make[1]: *** [/home/caiyy/桌面/lede/staging_dir/target-arm_cortex-a9_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/caiyy/桌面/lede'
/home/caiyy/桌面/lede/include/toplevel.mk:207: recipe for target 'world' failed
make: *** [world] Error 2