Failure during fresh install / Ubuntu 22.04.3 (PyIndi-Client / SWIG) about indi-allsky

[aaronwmorris]

There is a typo in one of the INDI headers causing this problem. The INDI devs have fixed the problem in their repo, but I do not think the fix will be distributed until 2.0.5

indilib/indi#1948

You just need to edit /usr/include/libindi/indibase.h (or /usr/local/include) and remove the space between % and "include".

[bluthen]

Three days ago this was pushed to add indi 2.0.4 support:
#978

Have you tried with a new pull from less than 3 days ago?

[SubBass100]

Yes, I've tried on two fresh installs today, one about 45 minutes ago. I can provide any logging you need. It's still on the screen

[SubBass100]

🙏 Thanks so much that got me past with no error. I feel I should have asked sooner but wanted to exhaust me being the problem first. I did notice as the setup continued and it asked me for what camera driver to select, I would normally select "indi_webcam_ccd" so that I can use my IP camera. however I am not seeing it now, has it's name changed?

[aaronwmorris]

As far as I can tell, the name has not changed. It should be part of the indi-webcam package in the PPA repo. Is it possible it is just at the bottom of the list? You may have to scroll down to see it.

[SubBass100]

This is the list that I see. It might have something to do with the diagnostics I was doing in attempt to solve the last problem. I will try to blow everything away again and install using the new fix and see if it appears!

[aaronwmorris]

You may just try installing the package manually.

sudo apt-get install indi-webcam

[SubBass100]

Perfect! for completeness, I reinstalled Ubuntu, went through the apt update/upgrade, git cloned indi-allsky and ran ./setup.sh

As it was installing I waited until /usr/include/libindi/indibase.h was created (just used cat /usr/include/libindi/indibase.h repeatedly until it appeared and when it did I used sudo nano /usr/include/libindi/indibase.h and removed the space after the % before the include. The setup installed that part fine and then asked about what camera drivers to use. indi_webcam_ccd was available and I selected it. No errors occurred. I hope this helps someone. Thank you for your help!