Restarting pi services about indi-allsky

[aaronwmorris]

How are you restarting the services?

[Adrien5353]

Allsky starts its services on its own, and I put my script as a service on the pi, loaded AT the boot.
When the crash occurs, allsky restarts itself after a few seconds. I don't act on anything.
In fact, I cannot determine if it allsky which takes all the resources or if my problem is elsewhere

[aaronwmorris]

Can you describe the crash? What behavior indicates a crash?

[Adrien5353]

The connection to the Raspberry Pi is temporarily cut off: SSH, ASCOM client, and also, I have to refresh the indi-allsky web page to get the new camera images; otherwise, it remains stuck on the last capture before the "crash". My script that collects weather sensor data is also stopped. In fact, it's as if all services were abruptly halted. Only indi-allsky resumes on its own.

However, the crash never occurs if I stop the services (from the web interface, for example). With indi-allsky running, the crash frequency is random (between 10 minutes and 1-2 hours).

sorry if it's not clear :/

[aaronwmorris]

Is the Pi rebooting itself?

[Adrien5353]

no , the pi does not seems to reboot as it's really fast : few seconds later i can log in again, while it takes more time when it's a complete reboot

[aaronwmorris]

That sounds really weird, I have not experienced this behavior previously. Are you connected via ethernet or wifi?

[Adrien5353]

connected with ethernet.
really frustrating :(

i'm installing debian 11 right now on an old nuc. i would have prefered use my pi4, but i'll try this way

[aaronwmorris]

What kind of camera are you using? Could you post the I2C script?

Have you checked the logs in /var/log/syslog?

You could post the results of ./misc/support_info.sh ?