aaronwmorris / indi-allsky Goto Github PK

Hi,

very interesting project. Will try it asap.

I see you mention remote cam usage. That would bring lots of boards with small RAM into consideration, right? Like older orange pi with 512mb ram.

I will give it a try over the weekend…

Again congratulations for this project!

It would be nice to automatically detect meteors as part of an allsky camera image pipeline. I've heard of this being done from a separate windows machine running https://allskeye.com/. I also had a play with the https://globalmeteornetwork.org/ software to process a stack of fits images with their RMS software, but the way this works is designed around video capture so was a dead end (https://globalmeteornetwork.groups.io/g/main/topic/79381433).

The most promising project for an allsky camera that might be integratable is https://github.com/dwkim78/ASTRiDE - I haven't played with this at all, but you could imagine it being part of the pipeline. Another route would be to train an ML model, there are a lot of published research papers and some public code around like https://github.com/satmonkey/MeteorDL but again, I haven't had time to play to see how well they perform with allsky data.

Can a feature to set date/time be added? For some reason the RPi4 doesn’t save the date/time when power is removed, which is how I normally store it. I was unable to set the time and the Timelapse changed the gain in the middle of the night. Lost about a third of the exposures. Thanks.

if i run the setup.sh on my Pi i got

Unknown distribution Raspbian 11 (armv6l)

can you pls fix this ?

Is it possible to add Fahrenheit as a temperature option, or an option to display both.

Thanks, love the software.

Brian

No issue, but I'd love to be able to disable the overlay for some clean images to stack/star trail/etc.

Is it possible for us to customise the text overlay that's added to the images.

It'd be nice to be able to:

• disable it completely - or only have it apply to e.g. FTP uploaded image, not timelapses and startrails.
• change the date/time format
• add custom text - maybe use templates for the different standard variables (e.g. %datetime%\nCPU Temperature: %CPUtemp%\nLocation: Somewhere over the rainbow
• include an image overlay (e.g. transparent png)

Great work - loving this so far. Still weather-testing my build at the moment, but getting some great results with the ASI 224MC.

EDIT: additional thought: saw some discussion around overlaying a planetarium (would be a lovely feature). Again, maybe the planetarium overlay could be saved as a transparent png - to allow user to switch it on/off and not affect the raw files?

Would it be possible to add an option in System page to manually invoke Time-lapse, Star Trail, and Keogram generation? It seems the only time these are generated is at sunrise and sunset. However, sometimes the device needs to be turned off before these times and the files are just sitting in the folder. An example is when I use the device during outreach events that only lasts 4-5 hours or an imaging session where I pack up before sunrise. Rather than leave the device on and wait for sunrise/sunset to process the files, an option to manually activate for the current files would be useful.

So if the process is manually invoked, whatever files are available for a given day/night would be processed. It should be possible that multiple products could be produced manual generation is invoked multiple times, using whatever files are available for the given day/night time period. Of course, the normal function of processing all day/night images at sunrise/sunset should still function without interaction.

halp!

Hello,
My installation is successful (I think) but I can't access to the web page https://raspberrypi/indi-allsky/.
I don't know the login and pwd. Is-it the same of the Pi ?
Thank you

I just got the following error when trying to capture darks for the first time.

Build: Current
OS: Raspberry Pi OS
SBC: Pi 3B
Camera: SV305

2022-06-26 11:02:52,853 [ERROR] MainProcess uploader.unhandled_exception() #32: Value: 'task_id'
[2022-06-26 11:02:52,853] ERROR in uploader: Value: 'task_id'
2022-06-26 11:02:52,857 [ERROR] MainProcess uploader.unhandled_exception() #37: ' File "/home/pi/indi-allsky/./darks.py", line 87, in <module>\n action_func()\n'
[2022-06-26 11:02:52,857] ERROR in uploader: ' File "/home/pi/indi-allsky/./darks.py", line 87, in <module>\n action_func()\n'
2022-06-26 11:02:52,858 [ERROR] MainProcess uploader.unhandled_exception() #37: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 305, in sigmaclip\n self._run(IndiAllSkyDarksSigmaClip)\n'
[2022-06-26 11:02:52,858] ERROR in uploader: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 305, in sigmaclip\n self._run(IndiAllSkyDarksSigmaClip)\n'
2022-06-26 11:02:52,859 [ERROR] MainProcess uploader.unhandled_exception() #37: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 430, in _run\n self._take_exposures(exposure, dark_filename_t, bpm_filename_t, ccd_bits, stacking_class)\n'
[2022-06-26 11:02:52,859] ERROR in uploader: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 430, in _run\n self._take_exposures(exposure, dark_filename_t, bpm_filename_t, ccd_bits, stacking_class)\n'
2022-06-26 11:02:52,860 [ERROR] MainProcess uploader.unhandled_exception() #37: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 490, in _take_exposures\n hdulist = self._wait_for_image()\n'
[2022-06-26 11:02:52,860] ERROR in uploader: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 490, in _take_exposures\n hdulist = self._wait_for_image()\n'
2022-06-26 11:02:52,861 [ERROR] MainProcess uploader.unhandled_exception() #37: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 234, in _wait_for_image\n task_id = i_dict[\'task_id\']\n'
[2022-06-26 11:02:52,861] ERROR in uploader: ' File "/home/pi/indi-allsky/indi_allsky/darks.py", line 234, in _wait_for_image\n task_id = i_dict[\'task_id\']\n'

I'm not sure if this is common or just me doing something daft, but I wanted to report it.

Hi ,
i tried to install indi-allsky on orange pi +2e with armbian debian 11 but i get errors with built wheel of cffi and ansible..
Any ideas why these errors?
Thanks
Pierre

Hello,
I am getting a Sony RX 100 M1 next week which I would like to use for the indi-allsky system, should I send you the data via indi_getprop?

What are x1, y1, x2, y2

For instance in image of 1280 x 960

Would values of 200,200,1180,860 crop 200 pixels on the top and left and crop 100 pixels around the border on the bottom and right?

I want to install the allsky program on debian 11.

During the installation I get the error message dbus python cannot be installed.

Do you have a solution for this?

Use it in a VM with Debian 11 without gui
Python 3.9 and 2.7

https://0bin.net/paste/GHfY8w1q#YVSL4U9QWjW4JwM01JXxx5xsLbpnOyaJuLRk8hWE0dp

Or do you want to tell me with which OS it works?

Good evening,

I would like to test a Touptek cam but i dont get die config for it ?

With day capture and day timelapse disabled, no end of night or night timelapse is being generated. The logs do not show any errors nor do the processes queue or fire. If Day capture and Day Timelapse is enabled, a Day timelapse is generated at end of day but still no end of night process.

Attached is a peek at the log file showing the last night image capture, then immediate switch to day mode and no further night processes. Additional items of note:

1. VideoWorker process does start at boot time and generates no errors
2. Manual kicking of the generateNightTimelapse says it runs and doesn't throw any errors, but it does not produce an output

Jun 15 05:53:09 allskypi [INFO] FileUploader001 uploader.run() #201: Upload transaction completed in 0.2132 s
Jun 15 05:53:16 allskypi [INFO] MainProcess allsky.run() #596: Camera last ready: 10.1s
Jun 15 05:53:16 allskypi [INFO] MainProcess allsky.run() #597: Exposure state: OK
Jun 15 05:53:16 allskypi [INFO] MainProcess allsky.detectNight() #835: Sun altitude: -5:58:11.5
Jun 15 05:53:16 allskypi [INFO] MainProcess allsky.detectMoonMode() #852: Moon altitide: 13:17:38.1, phase 98.5%
Jun 15 05:53:16 allskypi [INFO] MainProcess allsky.run() #610: Daytime capture is disabled

Hi Aaron,

Below is a nice daytime video in relatively clear skies. For reference my ADU window is 475,275 - 575,375 a patch in the top left of the view. The minimum exposure time of the camera is 0.000032s according to the tech specs. Target ADU is 150, deviation 5.

As you can see once the sun rises the system is managing exposure well, then it hits a phase where the exposure time is bouncing around causing flickering. Then it stabilises but over the rest of the day it steps up in brightness and drifts away from the nice exposure value at the start of the day. This is somewhat counterintuitive as the ADU window is top left so as the sun moves closer and finally over the window I would have expected the exposure to ramp down not up.

Do you have any tips for improving the behaviours here - overall this is much smoother than I had with the TJ setup, but if there's optimisation I can do I thought it worth asking. Thanks.

-Mark

https://www.dropbox.com/s/v3f66zuchv5y1ws/allsky-timelapse_ccd2_20220710_day.mp4?dl=0

Hello very nice project.

Can I use my Canon 550D as Allsky-Camera??

Marco

So this is the new issue: The Webserver is working, but no web interface, only the Apache placeholder page is shown

pi@raspberrypi:~ $ cd indi-allsky pi@raspberrypi:~/indi-allsky $ systemctl --user stop indi-allsky pi@raspberrypi:~/indi-allsky $ source virtualenv/indi-allsky/bin/activate (indi-allsky) pi@raspberrypi:~/indi-allsky $ ./allsky.py run Traceback (most recent call last): File "./allsky.py", line 10, in <module> app = indi_allsky.flask.create_app() File "/home/pi/indi-allsky/indi_allsky/flask/__init__.py", line 66, in create_app app.config.from_file(p_flask_config, load=json.load) File "/home/pi/indi-allsky/virtualenv/indi-allsky/lib/python3.7/site-packages/flask/config.py", line 196, in from_file with open(filename) as f: FileNotFoundError: [Errno 2] Unable to load configuration file (No such file or directory): '/etc/indi-allsky/flask.json'

I don't know if it is important, but this error was also shown at the end of the installation:

`**** Enabling services ****
Job for gunicorn-indi-allsky.socket failed.
See "systemctl --user status gunicorn-indi-allsky.socket" and "journalctl --user -xe" for details.
pi@raspberrypi:~/indi-allsky $ systemctl --user status gunicorn-indi-allsky.socket
● gunicorn-indi-allsky.socket - indi-allsky gunicorn socket
Loaded: loaded (/home/pi/.config/systemd/user/gunicorn-indi-allsky.socket; enabled; vendo
Active: failed (Result: resources)
Listen: /var/lib/indi-allsky/gunicorn-indi-allsky.sock (Stream)

Feb 01 22:07:37 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed to create list
Feb 01 22:07:37 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed to listen on s
Feb 01 22:07:37 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed with result 'r
Feb 01 22:07:37 raspberrypi systemd[636]: Failed to listen on indi-allsky gunicorn socket.
Feb 01 22:09:32 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed to create list
Feb 01 22:09:32 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed to listen on s
Feb 01 22:09:32 raspberrypi systemd[636]: gunicorn-indi-allsky.socket: Failed with result 'r
Feb 01 22:09:32 raspberrypi systemd[636]: Failed to listen on indi-allsky gunicorn socket.`

Hi.
I tried to install with QHY5 but got this error:
2021-09-08 18:02:40,568 [INFO] MainProcess _initialize() #255: Set BLOB mode
2021-09-08 18:02:40,570 [INFO] MainProcess newMessage() #129: new Message 2021-09-08T11:02:40: [ERROR] Connecting to camera failed (QHY5LII-M-6077e8602ac8994f3).
2021-09-08 18:02:40,572 [INFO] MainProcess configureDevice() #234: Setting switch FRAME_FORMAT
2021-09-08 18:02:40,573 [INFO] MainProcess newSwitch() #116: new Switch CONNECTION for device QHY CCD QHY5LII-M-6077e
Traceback (most recent call last):
File "./allsky.py", line 97, in
action_func(*args_list)
File "/home/pi/indi-allsky/indi_allsky/allsky.py", line 393, in run
self._initialize()
File "/home/pi/indi-allsky/indi_allsky/allsky.py", line 258, in _initialize
self.indiclient.configureDevice(self.ccdDevice, self.config['INDI_CONFIG_DEFAULTS'])
File "/home/pi/indi-allsky/indi_allsky/indi.py", line 235, in configureDevice
self.set_switch(device, k, on_switches=v['on'], off_switches=v.get('off', []))
File "/home/pi/indi-allsky/indi_allsky/indi.py", line 403, in set_switch
c = self.get_control(device, name, 'switch')
File "/home/pi/indi-allsky/indi_allsky/indi.py", line 377, in get_control
raise TimeOutException('Timeout finding control {0}'.format(name))
indi_allsky.exceptions.TimeOutException: Timeout finding control FRAME_FORMAT
2021-09-08 18:02:50,585 [INFO] MainProcess info() #54: process shutting down

I would like to overlay information from a python script I have running on the pi. The script monitors the CPU and enclosure temperature (using a DHT22) and runs a fan if temperature thresholds are met. With Thomas Alquin's Allsky, I put the information in an html file and used a php include to add this information to his "public.php" page.

I could also envisage grabbing ambient conditions from my Davis weather gauge (already captured for INDI use). Any recommendations or feature enhancement would be appreciated.

I was building this on a RPi 4.
One thing I discovered is that you actually have to be logged in to the GUI to get this code to build successfully.
At first I was just SSH'd in and running from the command line.
It built (once all dependencies were satisfied, some were a bit tricky) and got as far as asking me to
Select an INDI driver
After that the setup.sh script ran a bit more then terminated as follows:

**** Setting up indiserver service ****
**** Setting up indi-allsky service ****
**** Setting up gunicorn ****
**** Enabling services ****
Failed to connect to bus: No such file or directory

The script exited abnormally, please try to run again...

However if I used VNC / Nomachine to connect to the RPI desktop and ran the same setup.sh script, it ran through to completion.
Hopefully this tip will help others.

Hi Arron, I would like some help setting up an Altair GPCAM2 290M to work with your allsky. The camera works fine within Indi. I believe it is a sub class of the toupek cameras so I tried to start with this. See the output below, can you suggest how I go about getting the correct config.

These two header files from indi may help you

https://github.com/indilib/indi-3rdparty/blob/master/libaltaircam/altaircam.h
https://github.com/indilib/indi-3rdparty/blob/master/indi-toupbase/indi_toupbase.h

When I run manually with the altair_ccd driver selcted I get the following output

(indi-allsky) astroberry@astroberry:~/indi-allsky $ cp config.json_touptek config.json
(indi-allsky) astroberry@astroberry:~/indi-allsky $ ./allsky.py -c config.json run
2021-11-18 21:18:19,493 [INFO] MainProcess info() #54: allocating a new mmap of length 4096
2021-11-18 21:18:19,527 [INFO] MainProcess __init__() #90: creating an instance of IndiClient
2021-11-18 21:18:19,528 [INFO] MainProcess _initialize() #243: Connecting to indiserver
INDI::BaseClient::connectServer: creating new connection...
INDI::BaseClient::connectServer: Already connected.
2021-11-18 21:18:19,532 [INFO] MainProcess serverConnected() #178: Server connected (localhost:7624)
2021-11-18 21:18:19,533 [INFO] MainProcess newDevice() #127: new device Altair ALTAIRGP290M
2021-11-18 21:18:19,536 [INFO] MainProcess newDevice() #127: new device Telescope Simulator
2021-11-18 21:18:19,585 [INFO] MainProcess newText() #169: new Text ACTIVE_DEVICES for device Telescope Simulator
2021-11-18 21:18:19,586 [INFO] MainProcess newText() #169: new Text SCOPE_CONFIG_NAME for device Telescope Simulator
2021-11-18 21:18:19,586 [INFO] MainProcess newSwitch() #162: new Switch MOUNT_TYPE for device Telescope Simulator
2021-11-18 21:18:19,588 [INFO] MainProcess newSwitch() #162: new Switch SIM_PIER_SIDE for device Telescope Simulator
2021-11-18 21:18:27,541 [INFO] MainProcess findCcds() #292: Found device Altair ALTAIRGP290M
2021-11-18 21:18:27,542 [INFO] MainProcess findCcds() #297:  Detected ccd
2021-11-18 21:18:27,542 [INFO] MainProcess findCcds() #297:  Detected guider
2021-11-18 21:18:27,542 [INFO] MainProcess findCcds() #292: Found device Telescope Simulator
2021-11-18 21:18:27,543 [INFO] MainProcess findCcds() #297:  Detected telescope
2021-11-18 21:18:27,543 [INFO] MainProcess findCcds() #297:  Detected guider
2021-11-18 21:18:27,545 [INFO] MainProcess _initialize() #260: Found 1 CCDs
2021-11-18 21:18:27,546 [WARNING] MainProcess _initialize() #263: Connecting to device Altair ALTAIRGP290M
2021-11-18 21:18:27,569 [INFO] MainProcess newText() #169: new Text DRIVER_INFO for device Altair ALTAIRGP290M
2021-11-18 21:18:27,580 [INFO] MainProcess newMessage() #175: new Message 2021-11-18T20:18:27: [INFO] Altair ALTAIRGP290M is online. Retrieving basic data.
2021-11-18 21:18:27,591 [INFO] MainProcess newSwitch() #162: new Switch CONNECTION for device Altair ALTAIRGP290M
2021-11-18 21:18:27,626 [INFO] MainProcess addCamera() #57: Camera DB ID: 2
2021-11-18 21:18:27,626 [INFO] MainProcess _initialize() #277: Set BLOB mode
2021-11-18 21:18:27,762 [INFO] MainProcess newMessage() #175: new Message 2021-11-18T20:18:27: [INFO] Maximum gain considering dual gain is 22500.
Traceback (most recent call last):
  File "/home/astroberry/indi-allsky/virtualenv/indi-allsky/lib/python3.7/site-packages/PyIndi.py", line 1081, in <lambda>
    __getattr__ = lambda self, name: _swig_getattr(self, BaseClient, name)
  File "/home/astroberry/indi-allsky/virtualenv/indi-allsky/lib/python3.7/site-packages/PyIndi.py", line 80, in _swig_getattr
    raise AttributeError("'%s' object has no attribute '%s'" % (class_type.__name__, name))
AttributeError: 'BaseClient' object has no attribute 'removeDevice'
2021-11-18 21:18:27,778 [INFO] MainProcess info() #54: process shutting down

My raspberry pi is very light on storage so with my TJ setup I kept only a few days on it and primarily used the scp to push everything to a nas for long term archiving. I assumed the expire parameter in the indi-allsky config set the same behaviour, but I now realise this is for images written out and doesn't include the videos . Would it be possible to have a limit on the number of days of data stored in total? Thanks.

Hi,

I‘m currently using a toupcam model does not contain an internal temperature sensor. Adding something to a raspberry or similar is not an issue. Maybe it would worth thinking about such an reading could be easily included.

Regards
Jörg

Hi,

I love this project! Great work!

I like the possibility of having those small older boards - for here its 3 orangepizeros - as a remote indiserver and connecting from a more powerful - in my case a NUC with more mem - server machine. Then use LXD containers to run multiple instances.

Works nicely - but a few questions/issues:

• I'm using a Zwo ASI 178 MC, an older T7 (ASI120MC clone), and a Touptek G3CMOS06300KPA (those also have an imx178 color inside)
• I have 3 LXD containers running - all on the same host and all point to 3 different orangepizero with the latest indi 1.9.7 with web manager. 2x times ZWO CCD, one-time Toupcam driver all together with Telescope Simulator. All connections are LAN based, I want to remove any wifi stability issue from the situation for now.

The ASI 178 runs very stable. But I have issues with the t7 and also with the Touptek. After some time I always encounter situations where the cam seems to be busy and not taking any more new pictures. This seems to go endless.

...
Jul 30 11:23:50 allsky2 [INFO] MainProcess allsky._queueManualTasks() #1435: Checking for manually submitted tasks
Jul 30 11:24:00 allsky2 [INFO] MainProcess allsky.run() #605: Camera last ready: 8775.1s
Jul 30 11:24:00 allsky2 [INFO] MainProcess allsky.run() #606: Exposure state: BUSY
Jul 30 11:24:00 allsky2 [INFO] MainProcess allsky.detectNight() #847: Sun altitude: 47:45:50.3
Jul 30 11:24:00 allsky2 [INFO] MainProcess allsky.detectMoonMode() #864: Moon altitide: 35:23:30.4, phase 2.8%
Jul 30 11:24:00 allsky2 [WARNING] MainProcess indi.getCcdTemperature() #418: Sensor temperature: not supported
Jul 30 11:24:00 allsky2 [INFO] MainProcess allsky._queueManualTasks() #1435: Checking for manually submitted tasks
Jul 30 11:24:10 allsky2 [INFO] MainProcess allsky.run() #605: Camera last ready: 8785.2s
Jul 30 11:24:10 allsky2 [INFO] MainProcess allsky.run() #606: Exposure state: BUSY
Jul 30 11:24:10 allsky2 [INFO] MainProcess allsky.detectNight() #847: Sun altitude: 47:47:04.3
Jul 30 11:24:10 allsky2 [INFO] MainProcess allsky.detectMoonMode() #864: Moon altitide: 35:24:56.8, phase 2.8%
Jul 30 11:24:10 allsky2 [WARNING] MainProcess indi.getCcdTemperature() #418: Sensor temperature: not supported
Jul 30 11:24:10 allsky2 [INFO] MainProcess allsky._queueManualTasks() #1435: Checking for manually submitted tasks
Jul 30 11:24:20 allsky2 [INFO] MainProcess allsky.run() #605: Camera last ready: 8795.2s
Jul 30 11:24:20 allsky2 [INFO] MainProcess allsky.run() #606: Exposure state: BUSY
Jul 30 11:24:20 allsky2 [INFO] MainProcess allsky.detectNight() #847: Sun altitude: 47:48:18.2
Jul 30 11:24:20 allsky2 [INFO] MainProcess allsky.detectMoonMode() #864: Moon altitide: 35:26:23.1, phase 2.8%
Jul 30 11:24:20 allsky2 [WARNING] MainProcess indi.getCcdTemperature() #418: Sensor temperature: not supported
Jul 30 11:24:20 allsky2 [INFO] MainProcess allsky._queueManualTasks() #1435: Checking for manually submitted tasks
Jul 30 11:24:30 allsky2 [INFO] MainProcess allsky.run() #605: Camera last ready: 8805.3s
Jul 30 11:24:30 allsky2 [INFO] MainProcess allsky.run() #606: Exposure state: BUSY
...

When I restart with systemctl --user restart indi-allsky is runs for some time then again runs into this busy situation.

My questions / what I tried...

1.) When I run with a remote indiserver, I can disable the local one with something like "systemctl --user disable indiserver.service". After that systemctl --user restart indi-allsky takes a long time.

2.) Best color settings for the toupcam - auto white does not really work, still very green pic... ;-)

3.) As the ASI Cam is working stable it must have something to do with the config of cams and/or model? I applied the fix recommended for ASI 120MC:

{
"PROPERTIES": {},
"SWITCHES": {
"CCD_VIDEO_FORMAT": {
"on": [
"ASI_IMG_RAW16"
],
"off": [
"ASI_IMG_RAW8"
]
}
}
}

sadly no effect.

4.) In general the indiserver on the smaller orangepizeros works stable - I was using EKOS to test:

• shutdown the related container instance for that cam
• connect with ekos to the remote orangepizero (I tested both not working stable with indi-allsky, t7 and Toupcam)
• take a picture, put that into a loop in EKOS - this runs for hours - no issue.

Somehow indi-allsky does something different compared to EKOS to get into this "busy" state.

Any idea how to overcome this? Did anybody get a T7/Toupcam stable? - and yes, t7 needs darks... ;-).

Thanks!

Regards
Joerg

looks like is some unupdated libs on astroberry

pi@allsky:~/indi-allsky $ ./setup.sh
###############################################

Welcome to the indi-allsky setup script

###############################################

Distribution: Raspbian
Release: 11

INDI_DRIVER_PATH: /usr/bin
INDISERVER_SERVICE_NAME: indiserver
ALLSKY_SERVICE_NAME: indi-allsky
HTDOCS_FOLDER: /var/www/html/allsky
DB_FOLDER: /var/lib/indi-allsky

Setup proceeding in 10 seconds... (control-c to cancel)

**** Installing packages... ****

Current default time zone: 'Europe/Madrid'
Local time is now: Sun Jan 16 17:43:52 CET 2022.
Universal Time is now: Sun Jan 16 16:43:52 UTC 2022.

Raspbian 11 is not yet support in the Astroberry repo

I'm still running everything in testing, but I noticed this morning that when the moon went below the horizon and my ASI120MC-S transitioned from moon mode to night mode I didn't receive any more images throughout the night.
1.txt

Would it be possible to make 16bit TIFF RGB format a separate selectable save option, similar to FITS RAW? Since TIFFs don't work in some browsers, it would not be idea as a primary format like JPG or PNG. It may make more sense to make it a separate save format. It is useful if the full 12bit data from the ASI camera is saved as TIFF to use as a proxy for high quality time-lapse production. In my particular case, I'd like to save as PNG with embedded text/graphics for normal views and also save as TIFF with no embedded text/graphics to process with time-lapse software. Also, if TIFF data is saved debayered RGB and have dark frame applied that will speed up workflow even more.

I assume the normal image processing pipeline is INDI camera driver -> capture data as FITS -> apply dark frame -> convert FITS to PNG/JPG -> add overlay text/graphics -> save. The FITS raw pipeline may be INDI camera driver -> capture data as FITS -> save. Perhaps the TIFF raw pipeline would be INDI camera driver -> capture data as FITS -> apply dark frame -> convert FITS to debayered TIFF RGB -> save.

If this is too much overhead for the system design, at least making TIFF a separate option to save will allow more possibilities for post processing without interrupting the normal time-lapse image pipeline. I've had difficulties converting FITS to TIFF from this setup so that's why I'd prefer TIFF already debayered. The dark frame could be added afterwards but that's an additional step and actually dark frame applied to FITS is the better approach. Ultimately, the goal for this is decrease post-processing and increase image quality. Thanks.

Changing of Remote Image Name, attempted to change from image-resize.{0} to image.{0} appears to not have effect, reload config page and value is unchanged.

The setup is a PI4 4 GB HQ, Pi Cam Running Buster
Have set up a swap file size of 1024
Installed your softare
Installed INDI Library including all 3rd party drivers:
Set config to camera-specific settings the main one being 50% on image size.
What is happening is the Indi-all-sky shuts down. This morning the only way I could get it going was to disable the moon with 91 in the moon Altitude. Most of the time I just reboot but I am trying to figure out what the issues are.
I attached the log file

This looks to be the place that it quit

May 9 23:03:40 raspberrCAM [WARNING] ImageWorker001 image.mqtt_publish() #377: MQ publishing disabled
May 9 23:03:40 raspberrCAM [WARNING] ImageWorker001 image.upload_image() #353: Image uploading disabled
May 9 23:03:44 raspberrCAM [INFO] MainProcess allsky.run() #571: Camera last ready: 8.8s
May 9 23:03:44 raspberrCAM [INFO] MainProcess allsky.run() #572: Exposure state: OK
May 9 23:03:44 raspberrCAM [INFO] MainProcess allsky.detectNight() #800: Sun altitude: -35:08:21.1
May 9 23:03:44 raspberrCAM [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 42:22:15.5, phase 61.5%
May 9 23:03:44 raspberrCAM [INFO] MainProcess allsky.detectMoonMode() #821: Moon Mode conditions detected
May 9 23:03:44 raspberrCAM [WARNING] MainProcess indi.getCcdTemperature() #341: Sensor temperature: not supported
May 9 23:03:46 raspberrCAM [INFO] MainProcess indi.serverDisconnected() #175: Server disconnected (exit code = -1, localhost, 7624
May 9 23:03:47 raspberrCAM [INFO] MainProcess allsky.shoot() #994: Taking 0.66148210 s exposure (gain 16)
May 9 23:03:47 raspberrCAM [WARNING] ImageWorker001 allsky.sigterm_handler() #206: Caught TERM signal, shutting down
May 9 23:03:47 raspberrCAM [WARNING] FileUploader001 allsky.sigterm_handler() #206: Caught TERM signal, shutting down
May 9 23:03:47 raspberrCAM [WARNING] VideoWorker001 allsky.sigterm_handler() #206: Caught TERM signal, shutting down
May 10 05:25:15 raspberrCAM [INFO] MainProcess indi.init() #90: creating an instance of IndiClient
May 10 05:25:15 raspberrCAM [INFO] MainProcess allsky._initialize() #291: Connecting to indiserver
May 10 05:25:15 raspberrCAM [INFO] MainProcess indi.serverConnected() #172: Server connected (localhost:7624)
May 10 05:25:15 raspberrCAM [INFO] MainProcess indi.newDevice() #119: new device RPI Camera
May 10 05:25:15 raspberrCAM [INFO] MainProcess indi.newDevice() #119: new device Telescope Simulator

Help

indi-allsky.log

sqm.py tries to fetch SQM_ROI from config.json

However, config.json only has ADU_ROI and does not define SQM_ROI

I tried changing ADU_ROI to SQM_ROI in config.json, but that causes an error elsewhere.

For time being have added both ADU_ROI & SQM_ROI to config.json, appears to work.

Don't know if we need two different settings for this, or whether we can just change SQM_ROI in sqm.py to ADU_ROI.

The day/night timelapse generation mode switch setting doesn’t seem to be functioning as expected. When day timelapse is disable, no day images are saved, even when enable day capture is selected. I am assuming this is the case because they don’t show up in the Loop or Image tabs. When I reenable the day timelapse generation, the images would show up in the Loop and Image tabs. The Latest tab shows latest image and works normally in either case.

Seems images should still be saved if capture is enabled, even if timelapse generation is disabled. Please take a look at this and see if this is an issue. Check for night image capture also.

Hello,on a rpi 3B with rpiOS 10, running setup.sh, building wheel for opencv-python seems to run forever..
Something missing on my config?

Hi Aaron,

the setup script fails to successfully install indi-allsky:
**** Python virtualenv setup ****
mkdir: cannot create directory ‘/home/pi/indi-allsky/virtualenv’: Permission denied

Trying to use sudo or root fails because of your checking routine...

Any ideas?

System is a pi 4 with a clean install raspbian light (buster)

New install and experiencing new issues:

This time (Pi 4 4gb, Waveshare IMX378-190, Pi PoE hat) I needed to also run the build_Indi script, which seemed all ok.

Have also run apt-get update/upgrade, but setup.py fails each time at the Collecting scipy step.

It installs dependencies ok, but then fails with sub-process error (Getting requirements to build wheel ... error // error: subprocess-exited-with-error), looks the error step is:
../../meson.build:41:0: ERROR: Unknown compiler(s): [['gfortran'], ['flang'], ['nvfortran'], ['pgfortran'], ['ifort'], ['g95']]

Any encountered/fixed this issue?

× Getting requirements to build wheel did not run successfully.
  │ exit code: 1
  ╰─> [61 lines of output]
      The Meson build system
      Version: 0.62.2
      Source dir: /tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622
      Build dir: /tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-a5esqvey/build
      Build type: native build
      Project name: SciPy
      Project version: 1.9.0
      C compiler for the host machine: cc (gcc 10.2.1 "cc (Raspbian 10.2.1-6+rpi1) 10.2.1 20210110")
      C linker for the host machine: cc ld.bfd 2.35.2
      C++ compiler for the host machine: c++ (gcc 10.2.1 "c++ (Raspbian 10.2.1-6+rpi1) 10.2.1 20210110")
      C++ linker for the host machine: c++ ld.bfd 2.35.2
      Host machine cpu family: arm
      Host machine cpu: armv7l
      Compiler for C supports arguments -Wno-unused-but-set-variable: YES
      Library m found: YES

      ../../meson.build:41:0: ERROR: Unknown compiler(s): [['gfortran'], ['flang'], ['nvfortran'], ['pgfortran'], ['ifort'], ['g95']]
      The following exception(s) were encountered:
      Running "gfortran --version" gave "[Errno 2] No such file or directory: 'gfortran'"
      Running "gfortran -V" gave "[Errno 2] No such file or directory: 'gfortran'"
      Running "flang --version" gave "[Errno 2] No such file or directory: 'flang'"
      Running "flang -V" gave "[Errno 2] No such file or directory: 'flang'"
      Running "nvfortran --version" gave "[Errno 2] No such file or directory: 'nvfortran'"
      Running "nvfortran -V" gave "[Errno 2] No such file or directory: 'nvfortran'"
      Running "pgfortran --version" gave "[Errno 2] No such file or directory: 'pgfortran'"
      Running "pgfortran -V" gave "[Errno 2] No such file or directory: 'pgfortran'"
      Running "ifort --version" gave "[Errno 2] No such file or directory: 'ifort'"
      Running "ifort -V" gave "[Errno 2] No such file or directory: 'ifort'"
      Running "g95 --version" gave "[Errno 2] No such file or directory: 'g95'"
      Running "g95 -V" gave "[Errno 2] No such file or directory: 'g95'"

      A full log can be found at /tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-a5esqvey/build/meson-logs/meson-log.txt
      + meson setup --native-file=/tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-native-file.ini -Ddebug=false -Doptimization=2 --prefix=/usr /tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622 /tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-a5esqvey/build
      Traceback (most recent call last):
        File "/home/pi/indi-allsky/virtualenv/indi-allsky/lib/python3.9/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 363, in <module>
          main()
        File "/home/pi/indi-allsky/virtualenv/indi-allsky/lib/python3.9/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 345, in main
          json_out['return_val'] = hook(**hook_input['kwargs'])
        File "/home/pi/indi-allsky/virtualenv/indi-allsky/lib/python3.9/site-packages/pip/_vendor/pep517/in_process/_in_process.py", line 130, in get_requires_for_build_wheel
          return hook(config_settings)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 909, in get_requires_for_build_wheel
          with _project(config_settings) as project:
        File "/usr/lib/python3.9/contextlib.py", line 117, in __enter__
          return next(self.gen)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 888, in _project
          with Project.with_temp_working_dir(
        File "/usr/lib/python3.9/contextlib.py", line 117, in __enter__
          return next(self.gen)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 547, in with_temp_working_dir
          yield cls(source_dir, tmpdir, build_dir)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 463, in __init__
          self._configure(reconfigure=bool(build_dir) and not native_file_mismatch)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 494, in _configure
          self._meson(
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 477, in _meson
          return self._proc('meson', *args)
        File "/tmp/pip-build-env-xyv95hr3/overlay/lib/python3.9/site-packages/mesonpy/__init__.py", line 472, in _proc
          subprocess.check_call(list(args))
        File "/usr/lib/python3.9/subprocess.py", line 373, in check_call
          raise CalledProcessError(retcode, cmd)
      subprocess.CalledProcessError: Command '['meson', 'setup', '--native-file=/tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-native-file.ini', '-Ddebug=false', '-Doptimization=2', '--prefix=/usr', '/tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622', '/tmp/pip-install-day5c5xt/scipy_21c79712eb0641029c877d3a173e0622/.mesonpy-a5esqvey/build']' returned non-zero exit status 1.
      [end of output]

  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.


The script exited abnormally, please try to run again...

This is now defunct and broken of my own doing, but is something like this in the works natively in the package?

https://maphilli14.github.io/allskyplanetarium/

TIA

Mike

Please provide support to remedy issues with 403 errors related to USB drive access. Thanks.

it seems ok to disable capture and timelapse in day mode, but in night mode it is not generating timelapse, is that normal?

following your manual I am trying to setup indi allsky on a Raspbian Buster distro but I am having problems starting indi-allsky from here:
$ systemctl --user start indi-allsky

• I don't see anything that says the service is running
• i can't get into the web interface
• when i try to manually start ./allsky.py run

pi@raspberrypi:~/indi-allsky $ ./allsky.py run
Traceback (most recent call last):
  File "./allsky.py", line 3, in <module>
    import indi_allsky
  File "/home/pi/indi-allsky/indi_allsky/__init__.py", line 1, in <module>
    from .allsky import IndiAllSky
  File "/home/pi/indi-allsky/indi_allsky/allsky.py", line 15, in <module>
    import ephem
ModuleNotFoundError: No module named 'ephem'

everything in respect with the indiserver service seems fine

This is on a new install.
The error code is #408 Not enough images found to build star trail.
Timelaps is good and so is the Kegogram.
Jul 13 16:34:08 CamCamper [WARNING] VideoWorker001 starTrails.finalize() #129: Star trails images processed in 0.0 s
Jul 13 16:34:08 CamCamper [WARNING] VideoWorker001 starTrails.finalize() #130: Excluded 2128 images
Jul 13 16:34:08 CamCamper [ERROR] VideoWorker001 video.generateKeogramStarTrails() #408: Error generating star trail: Not enough images found to build star trail
Jul 13 16:34:08 CamCamper [WARNING] VideoWorker001 video.generateKeogramStarTrails() #412: Total keogram/star trail processing in 53.3 s
indi-allsky 2.log.zip

Tried the latest update with merge #224 but there was an issue. Day images saved and day time-lapse was generated, but as soon as night began imaging stopped. There was only one image saved for night and no further images were taken, including the latest image. Something has caused the system to stop taking night images when going from day to night. Please look into this. Thanks.

Great work on this project, but I am having a weird issue (as discussed on CloudyNights). I have the gain configured to 110 for day, 300 for night, and 200 for moon. When it changes from day to night or day to moon it is setting the gain to 720 (which is the max for the SV305).

Apr 9 19:59:43 allskypi [WARNING] MainProcess allsky.reconfigureCcd() #767: Change to night (moon mode)
Apr 9 19:59:43 allskypi [WARNING] MainProcess indi.setCcdGain() #412: Setting CCD gain to 720
Apr 9 19:59:43 allskypi [INFO] MainProcess indi.configureDevice() #332: Setting property CCD_GAIN
Apr 9 19:59:43 allskypi [INFO] MainProcess indi.newMessage() #179: new Message 2022-04-09T23:59:43: [INFO] Camera control 0 to 720
Apr 9 19:59:44 allskypi [WARNING] MainProcess indi.setCcdBinning() #474: Setting CCD binning to (1, 1)
Apr 9 19:59:44 allskypi [INFO] MainProcess indi.configureDevice() #332: Setting property CCD_BINNING
Apr 9 19:59:44 allskypi [INFO] MainProcess indi.newMessage() #179: new Message 2022-04-09T23:59:44: [INFO] Binning changed
Apr 9 19:59:58 allskypi [INFO] MainProcess allsky.shoot() #1160: Taking 1.32142818 s exposure (gain 720)

I am also seeing this in the logs:

Apr 9 08:23:33 allskypi [ERROR] MainProcess allsky.sighup_handler() #183: CCD night gain above maximum, changing to 720
Apr 9 08:23:33 allskypi [ERROR] MainProcess allsky.sighup_handler() #190: CCD moon mode gain above maximum, changing to 720
Apr 9 08:23:33 allskypi [ERROR] MainProcess allsky.sighup_handler() #197: CCD day gain above maximum, changing to 720

I am not sure if HUPing the indi-allsky fixes it. Tonight I stopped indi-allsky, stopped indi server, then started indi server, and then started indi-allsky. If the issue happens again tomorrow night I will try to just HUP indi-allsky and report back if that fixes it.

I can submit a full copy of the logs if needed, just let me know.

Thanks
Hersey

I had a working allsky.git on a Pi3 with ASI290mm. Upgrade script ran 2x times to resolve #192
Now I see this

here are some possibly relevant logs

May 9 16:00:05 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:48:49.1, phase 58.1% May 9 16:00:05 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 53.6 May 9 16:00:15 allsky [INFO] MainProcess allsky.run() #571: Camera last ready: 62.8s May 9 16:00:15 allsky [INFO] MainProcess allsky.run() #572: Exposure state: ALERT May 9 16:00:15 allsky [INFO] MainProcess allsky.detectNight() #800: Sun altitude: 48:07:10.0 May 9 16:00:15 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:50:48.7, phase 58.1% May 9 16:00:15 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 53.1 May 9 16:00:25 allsky [INFO] MainProcess allsky.run() #571: Camera last ready: 72.9s May 9 16:00:25 allsky [INFO] MainProcess allsky.run() #572: Exposure state: ALERT May 9 16:00:25 allsky [INFO] MainProcess allsky.detectNight() #800: Sun altitude: 48:05:09.8 May 9 16:00:25 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:52:48.4, phase 58.1% May 9 16:00:25 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 52.7 May 9 16:00:36 allsky [INFO] MainProcess allsky.run() #571: Camera last ready: 83.0s May 9 16:00:36 allsky [INFO] MainProcess allsky.run() #572: Exposure state: ALERT May 9 16:00:36 allsky [INFO] MainProcess allsky.detectNight() #800: Sun altitude: 48:03:09.3 May 9 16:00:36 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:54:48.3, phase 58.1% May 9 16:00:36 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 52.5 May 9 16:00:46 allsky [INFO] MainProcess allsky.run() #571: Camera last ready: 93.0s May 9 16:00:46 allsky [INFO] MainProcess allsky.run() #572: Exposure state: ALERT May 9 16:00:46 allsky [INFO] MainProcess allsky.detectNight() #800: Sun altitude: 48:01:09.1 May 9 16:00:46 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:56:48.0, phase 58.1% May 9 16:00:46 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 52.3 May 9 16:00:56 allsky [INFO] MainProcess allsky.run() #571: Camera last ready: 103.1s May 9 16:00:56 allsky [INFO] MainProcess allsky.run() #572: Exposure state: ALERT May 9 16:00:56 allsky [INFO] MainProcess allsky.detectNight() #800: Sun altitude: 47:59:08.8 May 9 16:00:56 allsky [INFO] MainProcess allsky.detectMoonMode() #817: Moon altitide: 30:58:47.7, phase 58.1% May 9 16:00:56 allsky [INFO] MainProcess indi.getCcdTemperature() #345: Sensor temperature: 53.1 pi@allsky:~ $ htop pi@allsky:~ $ pi@allsky:~ $

2, in __init__#012 self.camera_id = self.getLatestCamera()#012 File "/home/pi/indi-allsky/indi_allsky/flask/views.py", line 244, in getLatestCamera#012 return latest_camera.id#012AttributeError: 'NoneType' object has no attribute 'id' May 9 15:38:12 allsky [INFO] MainProcess glogging.info() #264: Worker reloading: config.json modified May 9 15:38:12 allsky [INFO] MainProcess views.dispatch_request() #1070: Wrote new config.json May 9 15:38:13 allsky [INFO] MainProcess glogging.info() #264: Worker exiting (pid: 13068) May 9 15:38:15 allsky gunicorn.indi_allsky.wsgi.error: [13811] Booting worker with pid: 13811 May 9 15:46:10 allsky gunicorn.indi_allsky.wsgi.error: [712] Starting gunicorn 20.1.0 May 9 15:46:10 allsky gunicorn.indi_allsky.wsgi.error: [712] Listening at: unix:/var/lib/indi-allsky/gunicorn-indi-allsky.sock (712) May 9 15:46:10 allsky gunicorn.indi_allsky.wsgi.error: [712] Using worker: gthread May 9 15:46:10 allsky gunicorn.indi_allsky.wsgi.error: [994] Booting worker with pid: 994 May 9 15:49:35 allsky [INFO] MainProcess glogging.info() #264: Worker reloading: config.json modified May 9 15:49:35 allsky [INFO] MainProcess views.dispatch_request() #1070: Wrote new config.json May 9 15:49:36 allsky [INFO] MainProcess glogging.info() #264: Worker exiting (pid: 994) May 9 15:49:38 allsky gunicorn.indi_allsky.wsgi.error: [2120] Booting worker with pid: 2120 May 9 15:50:20 allsky [WARNING] MainProcess forms.__init__() #944: No images found in DB May 9 15:56:29 allsky [INFO] MainProcess views.dispatch_request() #1490: Command return: None May 9 15:56:29 allsky gunicorn.indi_allsky.wsgi.error: [712] Handling signal: term May 9 15:56:30 allsky [INFO] MainProcess glogging.info() #264: Worker exiting (pid: 2120) May 9 15:56:32 allsky gunicorn.indi_allsky.wsgi.error: [712] Shutting down: Master May 9 15:58:30 allsky gunicorn.indi_allsky.wsgi.error: [713] Starting gunicorn 20.1.0 May 9 15:58:30 allsky gunicorn.indi_allsky.wsgi.error: [713] Listening at: unix:/var/lib/indi-allsky/gunicorn-indi-allsky.sock (713) May 9 15:58:30 allsky gunicorn.indi_allsky.wsgi.error: [713] Using worker: gthread May 9 15:58:30 allsky gunicorn.indi_allsky.wsgi.error: [947] Booting worker with pid: 947 May 9 16:03:37 allsky [INFO] MainProcess glogging.info() #264: Worker reloading: config.json modified May 9 16:03:37 allsky [INFO] MainProcess views.dispatch_request() #1070: Wrote new config.json May 9 16:03:38 allsky [INFO] MainProcess glogging.info() #264: Worker exiting (pid: 947) May 9 16:03:40 allsky gunicorn.indi_allsky.wsgi.error: [2733] Booting worker with pid: 2733

Aaron,

I've moved over from Thomas' allsky since I'm an indi man for the rest of my astro setup and I'm amazed by what you've done to get to parity so fast. This really is a great piece of work. Here's some feedback points from a fresh setup with ASI224mc:

• The ASI224mc works, but has the same problem it seems you see with other cameras where if the default and min exposure are zero it starts off with a flat return which meets the ADU criteria and keeps the system at lowest exposure. I'm finding that I need to have some value in default is helping getting it started properly.
• Your colours for text and the orbs are stated to be r,g,b but seem to be b,g,r
• It took me a while to realise that saving config also then needs a HUP to be applied. I would suggest this should be done automatically
• I always have had max exposure on 60s (not sure why anyone would have it on anything else?). However the period between exposures is automatically lengthened to the max exposure if the latter is bigger. (ie I have 15s as period, but this is reset to 60 as that is my max exposure). This new period applies even if the exposure isn't taking the max amount, which I didn't expect - I thought the behaviour would be to use whichever was larger would be the time between the start of exposures. I can see keeping this fixed is useful though - on my old setup timelapses would speed up or slow down based on varying exposure as clouds went past.
• It would be useful to have the equivalent of Thomas' public.php available somewhere so an external system can iframe in the current image with a javascript reloader built in - I have personally used this for iframing an updating image into grafana
• It would be nice to have a setting to control the speed of the exposure correction to match ADU. I'm finding in the day with clouds moving overhead it's taking too long to ramp up and down to meet the changing light.

A final thought - with respect to your jSQM ADU count. It might be possible to get the lux of an image as described in https://stackoverflow.com/questions/4876315/determining-image-luminance-brightness/4876528#4876528 and from the lux you can then get to the sky quality. This is some python I wrote for weatherradio to use a light (lux) sensor to measure sky quality and integrate the result into a weewx weatherstation converting between lux and SQM:

# Sky quality formula based on http://unihedron.com/projects/darksky/magconv.php
def luxtomag(x): return math.log10(x/108000)/-0.4
weewx.units.default_unit_format_dict['sky_quality'] = '%.1f'
weewx.units.default_unit_label_dict['sky_quality'] = u" visual mag/arcsec²"
weewx.units.conversionDict['sky_quality'] = {'lux': lambda x : 10.8e4 * 10**(-0.4*x) }
weewx.units.conversionDict['lux'] = {'sky_quality': luxtomag }

The nice thing about having SQM in mag/arcsec^2 is that then it can be pumped back into indi as WEATHER_LIGHT like with https://github.com/rkaczorek/indi-weather-mqtt/blob/main/indi-weather-mqtt.cpp so it could be used in applications like kstars for observatory control.

-Mark

Hi,

I'd like to get indi-allsky working with a Starlight Xpress Oculus all-sky camera - is there a driver in indi-allsky that would work with this device? Any help greatly appreciated.

Thanks.

Hello, I've got this software up and running and really like it, the timelapse creation etc are a great time saver. Thankyou.
I do have a couple of minor issues... hopefully you'll be able to help... :-)

Moon mode doesn't seem to work. The moon was above the horizon last night but it never switched to moon mode.

I seem unable to capture in 16bit. I'm probably missing something obvious.

I can log in to the camera using kstars (while indi-allsky isn't running but the indiserver is) and set the camera up as I want it but when I log out of it from kstars and restart indi-allsky, it goes back to 8bits per pixel.

I've tried various settings, read around the subject and other issues people have had but I'm not a linux/indi power user. I think a similar work around to the ASI120MC S camera issue might work but I do not know how to add the parameters in INDI configuration.

Happy to send logs and do any testing you want for further info on this camera but not being a power user, I may need some direction on that.

Thanks in advance
Jack

I have tried to follow the instructions to install indi-allsky onto my astroberry image as it has my indo dev environment and other tools that I may want to use. However there appers to be an conflict with Apache can you assist? I assume this is becuase astroberry already has a web service. I tried editing apache_indi-allsky.conf to move it to port 81 but this did not help?

Thanks

Looks a great project, I have an Altair GPCAM290 that works with indi so looking forwards to setting this up as an Allsky camera

Select an INDI driver: 1
**** Setting up indiserver service ****
**** Setting up indi-allsky service ****
**** Enabling services ****
**** Setup rsyslog logging ****
**** Start apache2 service ****
Module rewrite already enabled
Considering dependency setenvif for ssl:
Module setenvif already enabled
Considering dependency mime for ssl:
Module mime already enabled
Considering dependency socache_shmcb for ssl:
Module socache_shmcb already enabled
Module ssl already enabled
Site 000-default already disabled
Site default-ssl already disabled
Site indi-allsky already enabled
Synchronizing state of apache2.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable apache2
Job for apache2.service failed because the control process exited with error code.
See "systemctl status apache2.service" and "journalctl -xe" for details.
astroberry@astroberry:~/indi-allsky $ ^C
astroberry@astroberry:~/indi-allsky $ systemctl status apache2.service
● apache2.service - The Apache HTTP Server
   Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Thu 2021-11-18 00:48:40 CET; 10s ago
     Docs: https://httpd.apache.org/docs/2.4/
  Process: 14680 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)

Nov 18 00:48:40 astroberry apachectl[14680]: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0
Nov 18 00:48:40 astroberry apachectl[14680]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Nov 18 00:48:40 astroberry apachectl[14680]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
Nov 18 00:48:40 astroberry apachectl[14680]: no listening sockets available, shutting down
Nov 18 00:48:40 astroberry apachectl[14680]: AH00015: Unable to open logs
Nov 18 00:48:40 astroberry apachectl[14680]: Action 'start' failed.
Nov 18 00:48:40 astroberry apachectl[14680]: The Apache error log may have more information.
Nov 18 00:48:40 astroberry systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Nov 18 00:48:40 astroberry systemd[1]: apache2.service: Failed with result 'exit-code'.
Nov 18 00:48:40 astroberry systemd[1]: Failed to start The Apache HTTP Server.
```

Hi,

I tried to setup indi-allsky but failed.

Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
libcurl4-gnutls-dev : Depends: libcurl3-gnutls (= 7.68.0-1ubuntu2.7) but 7.68.0-1ubuntu2.8 is to be installed
libgnutls28-dev : Depends: libidn2-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

I'm a big HASS user and would love to get the timelapse view embeddable into lovelace in HASS. Currently using the

https://allsky/indi-allsky/videoviewer

has the side bar and looks wonky as a card...