zzfd97 Goto Github PK

snn_vhdl

Implementation of an Artificial Neural Network (ANN) on FPGA using VHDL

sof

Sound Open Firmware

solar-charger

12v 7AH Switchmode Charger with bells an whistles

solar-powered-sensor-board

solar_fountain

A kid's museum exhibit that uses solar to run a water fountain

solarchargerapp

A windows WPF application written in C# to communicate to my MPPT Solar Charger over USB

solarchargerhardware

Various versions of my MPPT Solar Charger

solarchargerrevc_software

Firmware of the MPPT Solar Charger Rev C (PIC18F46J50) with USB HID/MSD composite device

solarchargerreve_software

Firmware of the MPPT Solar Charger Rev E (PIC18F47J53) with USB HID/MSD composite device

solarduino-12a

12A MPPT solar charge controller based on Arduino

solarduino-li-ion

Solar charge controller with integrated 12 V Li-Ion BMS

solarpowercontrollernovoltage

somatosensorymouse

基于uCosIII多级体感3D鼠标

sombrerobms

A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

sound-localization

Code for sound localization project using microphone array board

spaceinvadersfpgagame

Verilog implementation of the classic arcade game Space Invaders for the Zedboard FPGA board

sparkroad-fpga

sparkswitch

Active precharce circuit with optional switch input

spectrum

Spectrum analyzer system using a 512-point FFT, in a Cyclone IV FPGA. Reads i2s audio from the codec and then does all FFT/VGA functions. Nios just reads the FFT result and draws the display bars. VGA frame buffer on-chip. VGA signals generated on-chip. See the included video files to watch it in action.

spiffs

Wear-leveled SPI flash file system for embedded devices

spms_vcmm

sprbms

Battery Management System based on LTC6803-3/4 and AT90CAN128 or CAN communication to master

sprinter

Firmware for RepRap printers and similar devices

stamem-public

only for testing by hjw in 2020-2-23

static-ip-finder

IOT 设备 静态IP 发现

std-mainboard

Template for future projects sharing the same mechanical dimensions and milled enclosure

steppermotorcontroller

StepperMotorController A board equipped with a 4x20 character LCD and two rotary encoders designed to controll a stepper motor driver. Supply voltage can be 12 or 24V DC for revision A and up to 60V DC for revision B. The pinout matches the Planet CNC 6.0 amps controller (https://planet-cnc.com/product/motordriver-6-0a-256/). Firmware will be shared here as well as soon as it exists.

steppermotorcontroller_bootloader

USB bootloader for the Stepper Motor Controller

steppermotorcontroller_software

Firmware for my StepperMotorController. Written in C using the Microchip XC8 compiler.

steppermotorcontroller_software_revb

Firmware for my StepperMotorController. To be used with the USB bootloader.