An Implementation of A Lite Bert For Self-Supervised Learning Language Representations with TensorFlow
ALBert is based on Bert, but with some improvements. It achieve state of the art performance on main benchmarks
recently, but with 30% parameters less or more. For albert_base it only has ten percentage parameters compare of original
bert model, and main accuracy is retained.
Chinese version of ALBERT pre-trained model, including checkpoints both for TensorFlow and PyTorch, will be available.
海量中文语料上预训练ALBERT模型:参数更少,效果更好。预训练小模型也能拿下13项NLP任务,ALBERT三大改造登顶GLUE基准
*** UPDATE, 2019-10-01 ***
Relesed albert_base_zh with only 10% parameters of bert_base, very small model(40M) & training can be very fast.
*** UPDATE, 2019-09-28 *** add code for three main changes of albert from bert and its test functions
1、albert_base_zh(小模型体验版), 参数量12M, 层数12,大小为40M
参数量为bert_base的十分之一,模型大小也十分之一;在口语化描述相似性数据集LCQMC的测试集上相比bert_base下降约1个点;
相比未预训练,albert_base提升14个点
2、albert_large, albert_xlarge, albert_xxlarge, coming soon.
if you want albert model with best performance, there is still a few days to go.
ALBERT模型是BERT的改进版,与最近其他State of the art的模型不同的是,这次是预训练小模型,效果更好、参数更少。
它对BERT进行了三个改造 Three main changes of ALBert from Bert:
1)词嵌入向量参数的因式分解 Factorized embedding parameterization
O(V * H) to O(V * E + E * H)
如以ALBert_xxlarge为例,V=30000, H=4096, E=128
那么原先参数为V * H= 30000 * 4096 = 1.23亿个参数,现在则为V * E + E * H = 30000*128+128*4096 = 384万 + 52万 = 436万,
词嵌入相关的参数变化前是变换后的28倍。
2)跨层参数共享 Cross-Layer Parameter Sharing
参数共享能显著减少参数。共享可以分为全连接层、注意力层的参数共享;注意力层的参数对效果的减弱影响小一点。
3)段落连续性任务 Inter-sentence coherence loss.
使用段落连续性任务。正例,使用从一个文档中连续的两个文本段落;负例,使用从一个文档中连续的两个文本段落,但位置调换了。
避免使用原有的NSP任务,原有的任务包含隐含了预测主题这类过于简单的任务。
We maintain that inter-sentence modeling is an important aspect of language understanding, but we propose a loss
based primarily on coherence. That is, for ALBERT, we use a sentence-order prediction (SOP) loss, which avoids topic
prediction and instead focuses on modeling inter-sentence coherence. The SOP loss uses as positive examples the
same technique as BERT (two consecutive segments from the same document), and as negative examples the same two
consecutive segments but with their order swapped. This forces the model to learn finer-grained distinctions about
discourse-level coherence properties.
其他变化,还有 Other changes:
1)去掉了dropout Remvoe dropout to enlarge capacity of model.
最大的模型,训练了1百万步后,还是没有过拟合训练数据。说明模型的容量还可以更大,就移除了dropout
(dropout可以认为是随机的去掉网络中的一部分,同时使网络变小一些)
We also note that, even after training for 1M steps, our largest models still do not overfit to their training data.
As a result, we decide to remove dropout to further increase our model capacity.
其他型号的模型,在我们的实现中我们还是会保留原始的dropout的比例,防止模型对训练数据的过拟合。
2)为加快训练速度,使用LAMB做为优化器 Use lAMB as optimizer, to train with big batch size
使用了大的batch_size来训练(4096)。 LAMB优化器使得我们可以训练,特别大的批次batch_size,如高达6万。
3)使用n-gram(uni-gram,bi-gram, tri-gram)来做遮蔽语言模型 Use n-gram as make language model
即以不同的概率使用n-gram,uni-gram的概率最大,bi-gram其次,tri-gram概率最小。
本项目中目前使用的是在中文上做whole word mask,稍后会更新一下与n-gram mask的效果对比。n-gram从spanBERT中来。
1、albert_base, 参数量12M, 层数12,10月7号
2、albert_large, 参数量18M, 层数24,10月13号
3、albert_xlarge, 参数量59M, 层数24,10月6号
4、albert_xxlarge, 参数量233M, 层数12,10月7号(效果最佳的模型)
30g中文语料,超过100亿汉字,包括多个百科、新闻、互动社区。
预训练序列长度sequence_length设置为512,批次batch_size为4096,训练产生了3.5亿个训练数据(instance);每一个模型默认会训练125k步,albert_xxlarge将训练更久。
作为比较,roberta_zh预训练产生了2.5亿个训练数据、序列长度为256。由于albert_zh预训练生成的训练数据更多、使用的序列长度更长,
我们预计albert_zh会有比roberta_zh更好的性能表现,并且能更好处理较长的文本。
训练使用TPU v3 Pod,我们使用的是v3-256,它包含32个v3-8。每个v3-8机器,含有128G的显存。
模型 | 开发集 | 测试集 |
---|---|---|
BERT | 77.8 (77.4) | 77.8 (77.5) |
ERNIE | 79.7 (79.4) | 78.6 (78.2) |
BERT-wwm | 79.0 (78.4) | 78.2 (78.0) |
BERT-wwm-ext | 79.4 (78.6) | 78.7 (78.3) |
XLNet | 79.2 | 78.7 |
RoBERTa-zh-base | 79.8 | 78.8 |
RoBERTa-zh-Large | 80.2 (80.0) | 79.9 (79.5) |
ALBERT-xlarge | ? | ? |
ALBERT-xxlarge | ? | ? |
注:BERT-wwm-ext来自于这里;XLNet来自于这里; RoBERTa-zh-base,指12层RoBERTa中文模型
模型 | 开发集(Dev) | 测试集(Test) |
---|---|---|
BERT | 89.4(88.4) | 86.9(86.4) |
ERNIE | 89.8 (89.6) | 87.2 (87.0) |
BERT-wwm | 89.4 (89.2) | 87.0 (86.8) |
BERT-wwm-ext | - | - |
RoBERTa-zh-base | 88.7 | 87.0 |
RoBERTa-zh-Large | 89.9(89.6) | 87.2(86.7) |
RoBERTa-zh-Large(20w_steps) | 89.7 | 87.0 |
ALBERT-zh-base | 86.4 | 86.3 |
ALBERT-xlarge | ? | ? |
ALBERT-xxlarge | ? | ? |
Model | MLM eval acc | SOP eval acc | Training(Hours) | Loss eval |
---|---|---|---|---|
albert_zh_base | 79.1% | 99.0% | 6h | 1.01 |
albert_zh_large | 80.9% | 98.6% | 22.5h | 0.93 |
albert_zh_xlarge | ? | ? | 53h(预估) | ? |
albert_zh_xxlarge | ? | ? | 106h(预估) | ? |
注:? 将很快替换
通过运行以下命令测试主要的改进点,包括但不限于词嵌入向量参数的因式分解、跨层参数共享、段落连续性任务等。
python test_changes.py
运行以下命令即可。项目自动了一个示例的文本文件(data/news_zh_1.txt)
bash create_pretrain_data.sh
如果你有很多文本文件,可以通过传入参数的方式,生成多个特定格式的文件(tfrecords)
GPU:
export BERT_BASE_DIR=albert_config
nohup python3 run_pretraining.py --input_file=./data/tf*.tfrecord \
--output_dir=my_new_model_path --do_train=True --do_eval=True --bert_config_file=$BERT_BASE_DIR/albert_config_xxlarge.json \
--train_batch_size=4096 --max_seq_length=512 --max_predictions_per_seq=76 \
--num_train_steps=125000 --num_warmup_steps=12500 --learning_rate=0.00176 \
--save_checkpoints_steps=2000 --init_checkpoint=$BERT_BASE_DIR/bert_model.ckpt &
TPU, add following information:
--use_tpu=True --tpu_name=grpc://10.240.1.66:8470 --tpu_zone=us-central1-a
注:如果你重头开始训练,可以不指定init_checkpoint;
如果你从现有的模型基础上训练,指定一下BERT_BASE_DIR的路径,并确保bert_config_file和init_checkpoint两个参数的值能对应到相应的文件上;
领域上的预训练,根据数据的大小,可以不用训练特别久。
以使用albert_base做LCQMC任务为例。LCQMC任务是在口语化描述的数据集上做文本的相似性预测。
We will use LCQMC dataset for fine-tuning, it is oral language corpus, it is used to train and predict semantic similarity of a pair of sentences.
下载LCQMC数据集,包含训练、验证和测试集,训练集包含24万口语化描述的中文句子对,标签为1或0。1为句子语义相似,0为语义不相似。
通过运行下列命令做LCQMC数据集上的fine-tuning:
1. Clone this project:
git clone https://github.com/brightmart/albert_zh.git
2. Fine-tuning by running the following command:
export BERT_BASE_DIR=./albert_large_zh
export TEXT_DIR=./lcqmc
nohup python3 run_classifier.py --task_name=lcqmc_pair --do_train=False --do_eval=true --data_dir=$TEXT_DIR --vocab_file=./albert_config/vocab.txt \
--bert_config_file=./albert_config/albert_config_large.json --max_seq_length=128 --train_batch_size=64 --learning_rate=2e-5 --num_train_epochs=3 \
--output_dir=albert_large_lcqmc_checkpoints --init_checkpoint=$BERT_BASE_DIR/bert_model.ckpt &
Notice/注:
you need to download pre-trained chinese albert model, and also download LCQMC dataset
你需要下载预训练的模型,并放入到项目当前项目,假设目录名称为albert_large_zh; 需要下载LCQMC数据集,并放入到当前项目,
假设数据集目录名称为lcqmc
If you have any question, you can raise an issue, or send me an email: [email protected];
Currently how to use PyTorch version of albert is not clear yet, if you know how to do that, just email us or open an issue.
You can also send pull request to report you performance on your task or add methods on how to load models for PyTorch and so on.
If you have ideas for generate best performance pre-training Chinese model, please also let me know.
Bright Liang Xu, albert_zh, (2019), GitHub repository, https://github.com/brightmart/albert_zh
1、ALBERT: A Lite BERT For Self-Supervised Learning Of Language Representations
2、BERT: Pre-training of Deep Bidirectional Transformers for Language Understanding
3、SpanBERT: Improving Pre-training by Representing and Predicting Spans
4、RoBERTa: A Robustly Optimized BERT Pretraining Approach
5、Large Batch Optimization for Deep Learning: Training BERT in 76 minutes(LAMB)