yz1988computer / fpe.net

Format-Preserving-Encryption for .NET

Format-Preserving Encryption for .NET

This library implements the FF1 method for format-preserving encryption specified in NIST Special Publication 800-38G, Recommendation for Block Cipher Modes of Operation: Methods for Format-Preserving Encryption.

The implementations focus on conformance, rather than on security or performance, and as such they may not be suitable for real-world use with sensitive data.

At the time of writing, some attacks against FF3 have been rumored about. Therefore the algorithm has not been ported to .NET.

Export restrictions

This distribution includes cryptographic software. The country in which you currently reside may have restrictions on the import, possession, use, and/or re-export to another country, of encryption software. BEFORE using any encryption software, please check your country's laws, regulations and policies concerning the import, possession, or use, and re-export of encryption software, to see if this is permitted. See http://www.wassenaar.org/ for more information.

License

Copyright (c) 2016 Weydstone LLC dba Sutton Abinger Copyright (c) 2018 Matthias Hunstock (.NET port, remove FF3)

See the NOTICE file distributed with this work for additional information regarding copyright ownership. Matthias Hunstock licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Acknowledgements

The original author thanks Morris Dworkin and the Computer Security Division, Information Technology Laboratory at National Institute of Standards and Technology for their kind assistance in interpreting the specification.

Additional Resources

NIST Special Publication 800-38G, "Recommendation for Block Cipher Modes of Operation: Methods for Format-Preserving Encryption" is available free of charge from: http://dx.doi.org/10.6028/NIST.SP.800-38G.

Sample data for FF1 and FF3 are available at the examples page on NIST’s Computer Security Resource Center website: http://csrc.nist.gov/groups/ST/toolkit/examples.html.

What is FPE

Common block cipher modes of encryption, such as AES, take fixed-length blocks of plaintext bytes as input and produce blocks of the same size ciphertext as output. Padding and block chaining modes allow block ciphers to be used to encrypt streams of data of arbitrary length.

In some circumstances, e.g. when working with legacy environments, it is necessary to produce ciphertext in the same format and length, using the same set of symbols as the original plaintext. For example, a payment account number (PAN) consists of up to 19 decimal digits, with the first 6 digits used to identify the payment scheme and issuing bank, and the final digit used as a checksum using the Luhn algorithm. A card payment processor may need to encrypt these PANs in a way that the ciphertext retains some or all of the original attributes of the plaintext, so that systems designed to process the plaintext may also process the ciphertext.

Format-preserving encryption (FPE) methods take strings of symbols as plaintext input, and produce ciphertext output of the same length as the input using the same set of symbols as the input. For the example above, this would allow a card payment processor to encrypt PANs yet retain the same format and structure in the ciphertext as in the plaintext.

Usage

The FF1 (and FF3) methods operate on several parameters:

• radix, the range of integer symbols [0..radix-1] used in the input and output
• K, an AES encryption key
• T, an array of bytes used as an arbitrary "tweak," which is not necessarily secret but which extends and modifies the key
• X, an array of integer symbols, each within the range [0..radix-1]

While FF3 uses a fixed-length 8 byte tweak, FF1 accepts an additional parameter:

• maxTlen, the maximum length of T; any length of T in the range [0..maxTlen] is accepted

Both FF1 and FF3 output arrays of integer symbols, with length equal to the input length, and with each symbol in the range [0..radix-1].

It is up to the caller to convert between arbitrary data formats, e.g. character-based data, and the arrays of integers that the FF1 and FF3 functions use for plaintext and ciphertext input and output. For example, a caller might convert input using the symbols [0123456789BCDFGHJKLMNPQRSTVWXZ] (i.e. the character set for the Natural Area Code) into the integer symbols [0..29], and reverse the conversion using the output.

The FF1 and FF3 methods operate only on uniform arrays of symbols where each symbol is in the same range. They do not preserve data formats where the set of symbols varies depending on the position within the input, such as for example a license plate number of one decimal digit followed by three upper case letters followed by three decimal digits. If necessary, the caller may transform such input into uniform symbols, then reverse the transformation to restore the original formatting.

This implementation focuses on conformance with the algorithms defined in NIST SP 800-38G, with naming and structure closely aligned to the definitions in NIST SP 800-38G. As such, variable names in the code defy naming conventions in favor of the naming conventions used in NIST SP 800-38G. So, for example, we use x to represent an integer and X to represent an array of integers or bytes (i.e. bits), even though this does not follow the conventions.

NIST SP 800-38G uses mathematical symbols for some of its notations, which require alternative naming. In the implementation, these are replaced with descriptive method names. So, for example, the notation "⌊x⌋" becomes floor(x) in the implementation.

In some places, NIST SP 800-38G uses superscripts and subscripts to specify additional parameters. So, for example, "STR^m_radix(x)" becomes "str(x,radix,m)" in the implementation.

Data Types

NIST SP 800-38G is written in terms of abstract data types, for which we have chosen specific data types in the implementation.

We use arrays of bytes in place of the bit string type described in NIST SP 800-38G. This implies that bit strings must have a length that is a multiple of 8 bits, but this is consistent with NIST SP 800-38G. (In fact, NIST SP 800-38G may have been clearer if it were written in terms of bytes rather than bits -- see ERRATA.txt.)

We implement the numeral string in NIST SP 800-38G as an array of integers. The range of values for numerals in NIST SP 800-38G is 0..2^radix, i.e. zero through 2²..2¹⁶, so all the values may be represented using 32-bit signed integers.

Integers in NIST SP 800-38G are implicitly non-negative whole numbers of arbitrary size, so we represent them using the BigInteger class.

As in NIST SP 800-38G, a block is a bit string (i.e. byte string) whose length is the block size of the block cipher (i.e. 128 bits or 16 bytes). We represent these as arrays of multiples of 16 bytes, without any special type. Note that the block size for AES, which is the approved block cipher, is 128 bits regardless of the key size.

As described in NIST SP 800-38G, a block string is an array of bits (i.e. bytes) whose length is a multiple of the block size of the block cipher. We represent this as an array of bytes with a length that is a multiple of 16, again without any special type.

Native Functions

Instead of implementing new LEN(X) functions for bit strings and numeral strings, we use the Length property of the array type. For byte strings the Length property is the BYTELEN(X) value, and the value of LEN(X) is X.Length/8. (Again, there is an assumption in NIST SP 800-38G that bit strings are multiples of 8 bits.)

Instead of the mod calculation described in NIST SP 800-38G, we use the basically the BigInteger.mod() methods. Note: the .NET BigInteger mod operation returns negative results for negative dividend operands. This behaviour is corrected in a wrapper method.

The bit string conversion in NIST SP 800-38G is only used with constant inputs, so we sometimes use inline constants in place of the function where this can improve readability.

The PRF(X) function used in FF1 is an implementation of the AES CBC mode without padding, followed by the extraction of the final block of the cipher. We have provided both the direct implementation of the PRF(X) function as Ciphers.prf(X) and an implementation that uses an AES Cipher object in Ciphers.prf2(X).

Unit Tests

The Unit tests are written to validate inputs and outputs using the sample data for FF1 and FF3 provided by NIST, as well as to provide code coverage and to fully exercise the functions. Sample data for FF1 and FF3 are available at the examples page on NIST’s Computer Security Resource Center website: [http://csrc.nist.gov/groups/ST/toolkit/examples.html">http://csrc.nist.gov/groups/ST/toolkit/examples.html]