Proxmox and OMR poor Performance ... about openmptcprouter

[Ysurac]

Did you can try e1000 instead of virtio ?

[Scaff31]

Which offer do you use ?

[vinceducat]

@Ysurac yes a try E1000 and virtio.

@Scaff31 i have my own vps on milkywan not link to mega or giga offer.

@Ysurac et scaff31 ... after many test the problème that in fact Freebox Pop "filter" ipv4 traffic versus ip v6.

i done direct connection beetween a computer with a 2.5Gb/s and the freebox pop link on the 2.5Gb/s port...

the result in ipv4 is 700/300 and 2000/700 in ipv 6.... :-( try with different machine et serveur of test.

@Ysurac is it possible in omr router to use only ipv6 fromm OMR router to the OMR Vps ? => i would try to bypass the problem

[Ysurac]

Yes it's possible, less tested for now but should work.

[vinceducat]

@Ysurac do you have some sample for setup omr router .. in the wizard ?

vps is milkywan i have ipv4 adresse
isp is Free with freebox pop.. (FTTH) (can i let freebox in router mode or put it i bridge mode ?)

you will welcome if you have some tips/samples ;-)

do i need to check some thinks on the omr vps side

[Ysurac]

Enable IPv6 via the "Advanced Settings" checkbox, and set an IPv6 address.
OMR also support IPv4 and IPv6 for same server and will use both and can even aggregate IPv6 connections with IPv4 connections with kernel 6.6 on snapshot.
Snapshot solve some issues with IPv6, there is still some that will be solved soon.

On VPS side, IPv6 need to be working before VPS install script is run.

[vinceducat]

@Ysurac at this time :
ipv6 is enable by the check box and the address is fd58:8a43:2f89::/48

for vps i have ipv4 address of the milkywan vps do i add the ipv6 beside or remplace it ?

as i read i'm a the official release ...with kernel 6.1 .. so no change that ipv6 link from OMR to VPS work with out using the 6.6 snapshot ?

do i change also the version on the VPS ?
(i dont want so because of me last problem, during past test... VPS fall down, and i have to contact milky to solve th probleme, i dont want to make to disturb much more the milky's guys :-()

in the wizard and "wan1" part witch is the link to the FreeBox Pop, with a dedicate interface, witch adresse do i need to add ?

ps: du to the limitation i fine in the freeboxPop (ipv4) filter, my goal is to only pass ipv6 traffic beetwin OMR ans Freeebox POP.

but i need ipv4 and ipv6 be route by OMR could you think it is possible ?

[vinceducat]

@Ysurac i try to make test with on new vps on hetner on debian 12 with snapshot version 0.61 6.6 but i have this error
--2024-05-08 20:56:17-- https://dl.xanmod.org/archive.key
Resolving dl.xanmod.org (dl.xanmod.org)... 2a06:98c1:3120::3, 2a06:98c1:3121::3, 188.114.96.3, ...
Connecting to dl.xanmod.org (dl.xanmod.org)|2a06:98c1:3120::3|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2024-05-08 20:56:17 ERROR 403: Forbidden.

any idea how to solve that

[vinceducat]

try a second time

install and have

Err:10 http://mirror.hetzner.com/debian/security bookworm-security/main amd64 Packages
404 Not Found [IP: 2a01:4ff:ff00::3:3 80]
Ign:10 http://mirror.hetzner.com/debian/security bookworm-security/main amd64 Packages
Err:10 http://mirror.hetzner.com/debian/security bookworm-security/main amd64 Packages
404 Not Found [IP: 2a01:4ff:ff00::3:3 80]
Reading package lists... Done
E: Failed to fetch http://mirror.hetzner.com/debian/security/dists/bookworm-security/main/binary-amd64/Packages 404 Not Found [IP: 2a01:4ff:ff00::3:3 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.

[vinceducat]

@Ysurac the script kill the vm after a restart ... i have to reinstall ... :-(

the kernel on hetzner is Linux debian-2gb-nbg1-4 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 and it try to install the snapshot with KERNEL="6.6" option ... is it ok ?

[Ysurac]

It seems that xanmod have an issue. I will check...

[vinceducat]

@Ysurac dl.xanmod.org seems to be not accessible from hetzner but ok from my home ... :-(

[vinceducat]

@Ysurac install of test version is ok now ..