yanfali / cr10_klipper

cr10 klipper profile

cr10_klipper

cr10 / cr10s klipper profile

This repo now holds two configs for two printers.

Environment variable

The update script uses an environment variable to determine which printer it is. This is set by an environment variable PRINTER_NAME, which needs to be one of the folders in the repo, for this repo the printer name has to be either:

• cr10
• cr10s

Adding an evironment variable is as easy as ssh'ing into your pi, opening your bashrc file nano ~/.bashrc, scrolling to the bottom and adding the environment variable (for example export PRINTER_NAME=cr10). After you have saved the bashrc file, source it source ~/.bashrc and issuing echo $PRINTER_NAME should return the name you've entered.

Updates:

• new thermistor setting
• added a bltouch --> virtual endstop
• bed mesh level config
• estep calibration updates
• split everything into seperate files. If you want to upload calibration settings,this is saved in the printer.cfg so only this needs to be updated.
• split everything into seperate folders.
• added new macros

Klipper / dwc2 updates

To update klipper / dwc2 use manu7irl's script which you can find @ https://github.com/manu7irl/klipper-DWC2-installer