For Intel Community Support, product questions, or help troubleshooting, visit ICS: https://communities.intel.com/community/tech/intel-curie
|
- x86: Arduino 101 Firmware
- ARC: Arduino sketches or
*.cpp
- Ubuntu 14.04 - 64 bit
mkdir -p ~/CODK && cd $_
git clone https://github.com/01org/CODK-A.git
cd CODK-A
make clone
sudo make install-dep
make setup
export CODK_DIR=$(pwd)
- x86:
make compile-x86
- ARC:
make compile-arc
- Both:
make compile
- x86:
make upload-x86-dfu
- ARC:
make upload-arc-dfu
- Both:
make upload
- x86:
make upload-x86-jtag
- ARC:
make upload-arc-jtag
- Both:
make upload-jtag
Default app blinks the pin-13 LED on Arduino 101 board
Curie ODK requires an updated BLE firmware. If you're on a factory version, please update.
The script will prompt you to manually reset the board.
- BLE:
make upload-ble-dfu
Connect JTAG and open three terminal tabs
make debug-server
make debug-x86
(gdb) target remote localhost:3334
make debug-arc
(gdb) target remote localhost:3333