PineAP cant enabled about ar150-wifipineapple

[xchwarze]

Add a external usb wifi for use wlan1mon

[aoxo2022]

I do
I use tplink wn722n v1
Still cant switch enabled

I use your gl-ar150-nano-2.7.0.23-imagebuilder-mini.bin

[xchwarze]

debug it as if it were a common linux (lsusb, logs, etc)
for example the TL-WN7200ND needs a powered usb hub to work

[aoxo2022]

I try use usb hub
Still cant enabled

Then i try your 2.7.0.13 optimized bin
I reflash ar150
And it can enabled
It confused me

Thankyou for answer my question

[xchwarze]

The information you are giving is not useful for debugging...
Could you generate a Debug file and attach to a reply in this thread? You can generate the file by going to Help module, and clicking "Generate Debug File".
However to use high power adapters they have to be used with powered hubs. If you use a normal hub it won't work because it doesn't have enough amps to power the adapter .

[aoxo2022]

Ok. Wait
I reflash with 2.7.0.23

[aoxo2022]

debug.log
this debug file

[aoxo2022]

I try again
-Flash with 2.7.0.23 mini
-usb adapter alfa awus036h

PineAP Daemon Enabled

this debug fil
debug (3).log
e

[xchwarze]

seems to be a missing driver (tplink)
try this

opkg update
opkg install kmod-ath9k-htc
reboot

since I don't have that adapter (and that version of hard) I don't know if it works in openwrt, but I suppose that with that driver it would work

[aoxo2022]

Ok. Let me try it.

[aoxo2022]

Thankyou sir. It works

seems to be a missing driver (tplink) try this

opkg update
opkg install kmod-ath9k-htc
reboot

since I don't have that adapter (and that version of hard) I don't know if it works in openwrt, but I suppose that with that driver it would work

Tq sir. It works.

My new question. Can i use 2 usb antenna external (with usb powered hub?

[xchwarze]

yes, I use 2 usb wlan + 1 pendrive

[aoxo2022]

yes, I use 2 usb wlan + 1 pendrive

Can you tell me your usb powered hub?