x-wrt / x-wrt

This repository is a fork of https://git.openwrt.org/openwrt/openwrt.git

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

• OpenWrt Firmware Selector

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

• OpenWrt Wiki Download

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

• LuCI Web Interface: Modern and modular interface to control the device via a web browser.

• OpenWrt Packages: Community repository of ported packages.

• OpenWrt Routing: Packages specifically focused on (mesh) routing.

• OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

• Quick Start Guide
• User Guide
• Developer Documentation
• Technical Reference

Support Community

• Forum: For usage, projects, discussions and hardware advise.
• Support Chat: Channel #openwrt on oftc.net.

Developer Community

• Bug Reports: Report bugs in OpenWrt
• Dev Mailing List: Send patches
• Dev Chat: Channel #openwrt-devel on oftc.net.

License

OpenWrt is licensed under GPL-2.0

x-wrt's Issues

如何修改ESSID

查阅网上很多方法均没有修改成功？？

我的路由器型号：Xiaomi Mi Router R3
架构：MediaTek MT7620A ver:2 eco:6
固件版本：NATCAP 4.0_b201810261006 Bionic r8426-94148f6b45
内核版本：4.14.78

试过在/etc/config/wireless文件中，在相应的 ssid 行后添加一行 bssid option，保存重启后发现还是没能修改成功

Let's Encrypt的证书不要钱……

https://github.com/Neilpang/acme.sh
acme.sh可以自动续期
很方便的
别搞自签证书了
看着害怕

挂载RTL8188EU弄了许久都没有成功

想编译一下发现包里也没有8188eu的驱动。

wan6端口pppoe拨号成功但获取不到ipv6地址

使用wan6端口pppoe拨号成功，但获取不到ipv6地址。
联通，newifi3，应该如何设置
另外网站的ipv6教程也是空的。

Wifi Problems with Asus RT-AC58U QCA4019

I have problem with my routers. This is the error log:

[ 20.581874] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
[ 20.581920] ath10k_ahb a000000.wifi: Falling back to user helper
[ 20.677763] ubi0 error: vol_cdev_read: damaged volume, update marker is set
[ 20.680724] firmware ath10k!pre-cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
[ 20.683939] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/cal-ahb-a000000.wifi.bin failed with error -2
[ 20.692693] ath10k_ahb a000000.wifi: Falling back to user helper
[ 20.735472] firmware ath10k!cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
[ 20.735784] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 20.743073] ath10k_ahb a000000.wifi: Falling back to user helper
[ 20.807441] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 20.809184] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 20.815436] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 20.829291] ath10k_ahb a000000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[ 20.851504] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=RT-AC58U from ath10k/QCA4019/hw1.0/board-2.bin
[ 20.851761] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/board.bin failed with error -2
[ 20.868121] ath10k_ahb a000000.wifi: Falling back to user helper
[ 20.911753] firmware ath10k!QCA4019!hw1.0!board.bin: firmware_loading_store: map pages failed
[ 20.911974] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 20.919290] ath10k_ahb a000000.wifi: failed to fetch board file: -11
[ 20.928680] ath10k_ahb a000000.wifi: could not probe fw (-11)
[ 21.120691] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a800000.wifi.bin failed with error -2
[ 21.120741] ath10k_ahb a800000.wifi: Falling back to user helper
[ 21.212857] ubi0 error: vol_cdev_read: damaged volume, update marker is set
[ 21.215669] firmware ath10k!pre-cal-ahb-a800000.wifi.bin: firmware_loading_store: map pages failed
[ 21.218950] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/cal-ahb-a800000.wifi.bin failed with error -2
[ 21.227764] ath10k_ahb a800000.wifi: Falling back to user helper
[ 21.267872] firmware ath10k!cal-ahb-a800000.wifi.bin: firmware_loading_store: map pages failed
[ 21.268260] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 21.275488] ath10k_ahb a800000.wifi: Falling back to user helper
[ 21.335077] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 21.337063] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 21.343028] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 21.357241] ath10k_ahb a800000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[ 21.378844] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=RT-AC58U from ath10k/QCA4019/hw1.0/board-2.bin
[ 21.379100] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/board.bin failed with error -2
[ 21.395452] ath10k_ahb a800000.wifi: Falling back to user helper
[ 21.435616] firmware ath10k!QCA4019!hw1.0!board.bin: firmware_loading_store: map pages failed
[ 21.435875] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 21.443231] ath10k_ahb a800000.wifi: failed to fetch board file: -11
[ 21.452647] ath10k_ahb a800000.wifi: could not probe fw (-11)

Can somebody help me?

MT7621-MT7615E-MT7615E

能出一个 MT7621-MT7615E-MT7615E 就好了

希望支持TP-LINK WDR6500 V7

Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]

Describe the solution you'd like
A clear and concise description of what you want to happen.

Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.

Additional context
Add any other context or screenshots about the feature request here.

希望能加入HiLink支持

雖然changelog上有提及"全面支持4G USB插卡"
但當用上HUAWAI的E3372的時侯
出現了error network device is not present
估計是缺了"kmod-usb-net-cdc-ether"

source: https://protyposis.net/blog/using-the-huawei-e3372-hi-link-lte-dongle-with-openwrt/

x-wrt-5.0-b201904130951-mvebu-cortexa9-linksys-wrt1900acv2-squashfs-factory

升级后无法上网，全新安装也无法上网

最新编译的固件下载地址

Downloads: https://github.com/x-wrt/build-release/releases

or

访问，忽略证书继续访问

固件地址

https://downloads.x-wrt.com/rom/

SDK下载地址

https://downloads.x-wrt.com/rom/sdk/

NOTE: 请忽略SSL证书继续访问

How to match firmware and source code

Example:
Release firmware version: x-wrt-5.0-b201904022153
Corresponding release tag: x-b201904022153

小米路由器3，sysupgrade时，报文件格式错误

小米路由器3，之前已经成功从官方固件刷到了你的x-wrt。最近想升级固件，下载了你的最新x-wrt，用sysupgrade时，系统报文件格式错误。
请问，必须刷回官方再装新版才能升级吗？有什么办法直接升级吗？

多台X86设备实测NFT-QoS静态限速功能无效

Describe the bug
多台X86设备实测NFT-QoS静态限速功能无效。
测试了两台设备，分别刷的XWRT最新版本，静态限速均无效。
同款设备测试刷了其它的两款X86系统，静态限速功能有效，应该是有BUG

为什么进程在 ping ec2ns.ptpt52.com

但是dns不存在，top里看到一直超时
timeout 30 ping -t1 -s16 -c16 -W1 -q ec2ns.ptpt52.com

希望增加软件包

希望增加软件包，直接在里面选择软件包安装很方便，去掉不习惯用命令

rt2x00 2.4 radio driver problem

It seems something got lost in the move from lede back to openwrt.
Your lede fork was very stable on Mir3.
You openwrt fork has a regression to this old bug.

稳定性问题

问题：
运行一段时间后路由器死机，可以显示WiFi信号，手机、电脑都不能连接，不能获取DHCP IP地址。需要断电重启路由。
运行环境：小米路由3
固件版本：x-wrt-5.0-b201902071033-ramips-mt7620-xiaomi_miwifi-r3-squashfs-sysupgrade.bin

R7000P

This repository is a mirror of our main repo at https://git.openwrt.org/openwrt/openwrt.git
It is for reference only and is not active for checkins or for reporting issues.

All issues should be reported at: https://bugs.openwrt.org

Please do not open any NEW issue here - we will be closing the Github issues
capability in the near future.

We will continue to accept Pull Requests here as described in the repo description.

Close this now and click here: https://bugs.openwrt.org

Thankyou for your co-operation.

编译过程遇到 Error

make[3] -C feeds/packages/net/usbip compile

请问这是缺少了什么 package 吗？

小米naono upnp无效

你好，upnp无法自动添加映射，怎么设置都无法添加，是已知问题吗，大概多久修复。

Last compiled version

solved

固件下载不了了啊

固件下载不了了
https://dl.x-wrt.com:4443/rom/

能否在设置向导里增加一个傻瓜式的ap模式设置

Rt

XIaomi R3

i can find that X-wrt used to support Xiaomi R3 in #20 , but now i cannot find R3 firmware download link on X-wrt website. there are only latest version firmwares on X-wrt website download page.

i dont know what's the reason you choose to abandon R3, but at least i request for a history version plz

希望得到wndr4300v2版本的适配

Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]

Describe the solution you'd like
A clear and concise description of what you want to happen.

Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.

Additional context
Add any other context or screenshots about the feature request here.

我的设备是GL.iNet GL-AR750S，安装后非常好用

这么好的固件，没有科学上网吗？
还是需要打开这个功能啊？
请教作者，赐教，谢谢！

再来一个科学上网，就完美了。

希望添加 极路由X C526A 的支持

IPQ4019和MT7615N的芯片方案

https://www.right.com.cn/forum/thread-342195-1-1.html

恩山这边有拆机贴

内网配置咨询

Hi Team,

我想问下固件里面默认内网的配置使用的是静态ip模式，这个跟我们正常使用的dncp有啥区别不？
如果我想改成正常的dhcp模式，限制dhcp地址池需要怎么设置？

另外，我使用的是小米3路由器，刷了x-wrt固件后发现，有时候会出现无线连接上去无法上网，但是有线是正常的，这个有什么比较好的处理办法不。

BR
Robin

acrh17的分区大小好像有些不太对劲

df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 6.8M      6.8M         0 100% /rom
tmpfs                   122.5M      1.3M    121.3M   1% /tmp
/dev/ubi0_7              60.7M     92.0K     57.5M   0% /overlay
overlayfs:/overlay       60.7M     92.0K     57.5M   0% /
tmpfs         

openwrt-ipq40xx-asus_rt-acrh17-initramfs-factory.trx刚刷上的时候 我看见还有90MB的可用空间
openwrt-ipq40xx-asus_rt-acrh17-squashfs-sysupgrade.bin刷上后就这样了……

MAC为什么是12个0？

MAC为什么是12个0？

Any performance figures on ACRH17+openwrt?

how to measure can be found here:
https://wiki.openwrt.org/doc/howto/benchmark.openssl

I'd like to know if IPQ4018 can outperform BCM4706, or just as good is it...

希望支持树莓派

希望支持树莓派

小米路由器3, wifi信号稳定问题

Hi Team,

使用了一段时间之后，发现信号的稳定性是个大问题，
经常出现2.4g 信号消失，只能用5G的wifi信号，然后，也撑不了太久，就没了.

之前是用老毛子的时候，没有出现，可以排除硬件的问题

型号： Xiaomi Mi Router R3
固件： x-wrt-5.0-b201910120941-ramips-mt7620-xiaomi_miwifi-r3-squashfs-sysupgrade.bin

acrh-17是不是合并到官方ac58-U里了

还是说提交并没有被接受？

斐讯K2刷机后无法连接，但能进breed

硬件版本A2
之前刷的原版OpenWrt，5Gwifi正常，2.4Gwifi用一段时间后会断开，所以想换X-Wrt试试
结果进breed刷了以后，无法打开管理界面，电脑无法分配到ip。breed仍然能进，刷其他固件包括前面的原版固件也一样打不开管理界面了，看指示灯倒是正常。

请教一下会是啥原因，该如何解决？
谢谢！

x86-generic 增加网卡驱动 Qualcomm Atheros Attansic L2 Fast Ethernet (rev a0)

能否增加以下网卡驱动
lspci里能看到以下网卡，但是无法驱动
Qualcomm Atheros Attansic L2 Fast Ethernet (rev a0)
能否增加相关驱动
谢谢

能否适配一个小米路由器PRO(R3P)得SPI 闪存版

小米路由器pro使用nand闪存，很多朋友刷机报错，变砖，原因就是NAND坏块问题一直解决不好。为了救砖，好在电路板上又SPI闪存的焊盘，可以很方便地改造为SPI闪存启动，只是目前没有定制固件，希望能给予支持。
谢谢！

M4.14.18

make[7]: *** [Makefile:1910: freadahead.o] Error 1
make[7]: Leaving directory '/home/openwrt/x-wrt/build_dir/host/m4-1.4.18/lib'
make[6]: *** [Makefile:1674: all] Error 2
make[6]: Leaving directory '/home/openwrt/x-wrt/build_dir/host/m4-1.4.18/lib'
make[5]: *** [Makefile:1572: all-recursive] Error 1
make[5]: Leaving directory '/home/openwrt/x-wrt/build_dir/host/m4-1.4.18'
make[4]: *** [Makefile:1528: all] Error 2
make[4]: Leaving directory '/home/openwrt/x-wrt/build_dir/host/m4-1.4.18'
make[3]: *** [Makefile:30: /home/openwrt/x-wrt/build_dir/host/m4-1.4.18/.built] Error 2
make[3]: Leaving directory '/home/openwrt/x-wrt/tools/m4'
time: tools/m4/compile#19.51#8.50#29.00
make[2]: *** [tools/Makefile:161: tools/m4/compile] Error 2
make[2]: Leaving directory '/home/openwrt/x-wrt'
make[1]: *** [tools/Makefile:157: /home/openwrt/x-wrt/staging_dir/target-mips_24kc_musl/stamp/.tools_compile_yynyynnyyynyyyyynyynnnyyyyyyyyyyyyyyyyyyyynnyynynyyyynnyyy] Error 2
make[1]: Leaving directory '/home/openwrt/x-wrt'
make: *** [/home/openwrt/x-wrt/include/toplevel.mk:218：world] 错误 2

固件PE下写盘提示错误

我的主机是J1900使用x86的4个固件都试过了，physdiskwrite写盘到之后的位置提示：

bytes writtenWrite error affter 271597568 bytes

试过如下四个固件：

natcap-4.0-b201812081014-x86-64-combined-ext4.img.gz
natcap-4.0-b201812081014-x86-64-uefi-gpt-ext4.img.gz
natcap-4.0-b201812081014-x86-generic-combined-ext4.img.gz
natcap-4.0-b201812081014-x86-generic-uefi-gpt-ext4.img.gz

amlogic

plis suport android tv box amlogic s905x x-wrt

K3最近版本5Gwifi驱动一直有问题

麻烦大佬看下，K3的固件 5G的wifi出不来，设置后出现“”无线未关联“”

newifi d1设备USB硬盘挂载问题

newifi d1路由器挂载的USB硬盘，闲置30分钟左右会自动断开挂载，挂载点消失，拔出USB在插入也无法自动挂载

Any plan about re-pushing Asus arch-17 support to OpenWrt?

Thank for your work.

breed-factory.bin如何制作的

想请教下小米的那几个breed-factory.bin是如何制作的，我想自己修改后编译，小米官方的openwrt都没有factory包

Add Xiaomi Mi R3 to the official OpenWRT

Would it be possible if you submitted a pull request at the official project so the Xiaomi MiWiFi Router 3 is officially supported?

If you don't want to make such job, do you mind if I submit a pull request to add that support?

Thanks in advance!

WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out

Latest R3 build seems to be completely broken. WAN interface drops packets heavily, router restarts every 10-15 minutes. Not sure if it's upstream bug or your build's one, can't find related bugs on track.

root@NATCAP:~# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 78:11:DC:12:2D:0A  
          inet6 addr: fe80::7a11:dcff:fe12:2d0a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:230519 errors:0 dropped:4 overruns:0 frame:0
          TX packets:330078 errors:7 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:214995099 (205.0 MiB)  TX bytes:366539912 (349.5 MiB)
          Interrupt:5 

root@NATCAP:~# ifconfig eth0.2
eth0.2    Link encap:Ethernet  HWaddr 78:11:DC:12:2D:0A  
          inet addr:176.15.23.109  Bcast:176.15.31.255  Mask:255.255.240.0
          inet6 addr: fe80::7a11:dcff:fe12:2d0a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:198769 errors:0 dropped:155 overruns:0 frame:0
          TX packets:325730 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:209250183 (199.5 MiB)  TX bytes:363788831 (346.9 MiB)
root@NATCAP:~# dmesg
[    0.000000] Linux version 4.9.77 (terminator@SC-GAME) (gcc version 6.3.0 (OpenWrt GCC 6.3.0 r6037-b4f1449) ) #0 Mon Feb 12 00:50:26 2018
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is Xiaomi Mi Router R3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
debug2: channel 0: window 998953 sent adjust 49623
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803efde4, node_mem_map 81000020
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=0004027a
[    0.000000] Readback ErrCtl register=0004027a
[    0.000000] Memory: 125396K/131072K available (3435K kernel code, 161K rwdata, 440K rodata, 180K init, 220K bss, 5676K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007578] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.070078] pid_max: default: 32768 minimum: 301
[    0.074690] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081062] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090551] devtmpfs: initialized
[    0.098368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.107908] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.113870] pinctrl core: initialized pinctrl subsystem
[    0.119577] NET: Registered protocol family 16
[    0.128614] Can't analyze schedule() prologue at 80357380
[    0.608812] PCI host bridge /pcie@10140000 ranges:
[    0.613421]  MEM 0x0000000020000000..0x000000002fffffff
[    0.618471]   IO 0x0000000010160000..0x000000001016ffff
[    0.637221] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.642614] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.649120] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.654500] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.661355] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.666741] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.674094] PCI host bridge to bus 0000:00
[    0.678029] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.684750] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.690442] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.697046] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.704767] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
[    0.704799] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    0.704815] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    0.704894] pci 0000:00:00.0: supports D1
[    0.704905] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.705181] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.713144] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    0.713193] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    0.713247] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.713364] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.713622] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.713641] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.713689] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.720056] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.726870] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.733414] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.740446] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.747030] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.754158] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.761134] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.765973] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.772547] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.779592] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.785231] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.794042] clocksource: Switched to clocksource systick
[    0.802575] NET: Registered protocol family 2
[    0.807713] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.814499] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.820624] TCP: Hash tables configured (established 1024 bind 1024)
[    0.826896] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.832520] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.838889] NET: Registered protocol family 1
[    0.843135] PCI: CLS 80 bytes, default 32
[    0.844915] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    0.851496] Crashlog allocated RAM at address 0x3f00000
[    0.857737] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.871936] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.877585] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.896144] io scheduler noop registered
[    0.899891] io scheduler deadline registered (default)
[    0.905232] ralink-usb-phy usbphy: invalid resource
[    0.911367] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.919654] console [ttyS0] disabled
[    0.923099] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    0.932792] console [ttyS0] enabled
[    0.939825] bootconsole [early0] disabled
[    0.949454] !!! nand page size = 2048, addr len=4
[    0.955000] mtk_nand_probe: alloc 1390, at 87c96000 , btt(87c970c0, 100), ranfc_mtd:87c971c0
[    0.963940] 10 ofpart partitions found on MTD device ra_nfc
[    0.969687] Creating 10 MTD partitions on "ra_nfc":
[    0.974701] 0x000000000000-0x000000040000 : "Bootloader"
[    0.982180] 0x000000040000-0x000000080000 : "Config"
[    0.989694] 0x000000080000-0x0000000c0000 : "Bdata"
[    0.997122] 0x0000000c0000-0x000000100000 : "Factory"
[    1.004697] 0x000000100000-0x000000140000 : "crash"
[    1.012026] 0x000000140000-0x000000180000 : "crash_syslog"
[    1.020040] 0x000000180000-0x000000200000 : "reserved0"
[    1.027881] 0x000000200000-0x000000600000 : "kernel0_rsvd"
[    1.037156] 0x000000600000-0x000000a00000 : "kernel"
[    1.045932] 0x000000a00000-0x000008000000 : "ubi"
[    1.079819] _nfc_read_raw_data: fail 
[    1.083551] nfc_read_oob: fail
[    1.086680] nand_block_checkbad: offs:6000000 tag: BAD 
[    1.105749] libphy: Fixed MDIO Bus: probed
[    1.112098] gsw: setting port4 to ephy mode
[    1.116460] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 link up (100Mbps/Full duplex)
[    1.125783] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[    1.135620] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[    1.142469] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.153885] rt2880_wdt 10000120.watchdog: Initialized
[    1.160288] NET: Registered protocol family 10
[    1.167441] NET: Registered protocol family 17
[    1.172042] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.185324] 8021q: 802.1Q VLAN Support v1.8
[    1.193664] UBI: auto-attach mtd9
[    1.197149] ubi0: attaching mtd9
[    1.612989] nand_block_checkbad: offs:6000000 tag: BAD 
[    1.771070] ubi0: scanning is finished
[    1.786822] ubi0: attached mtd9 (name "ubi", size 118 MiB)
[    1.792436] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.799513] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.806456] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.813561] ubi0: good PEBs: 943, bad PEBs: 1, corrupted PEBs: 0
[    1.819705] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.827096] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2114892353
[    1.836435] ubi0: available PEBs: 0, total reserved PEBs: 943, PEBs reserved for bad PEB handling: 19
[    1.846972] ubi0: background thread "ubi_bgt0d" started, PID 291
[    1.854418] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.860030] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.873858] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    1.886414] devtmpfs: mounted
[    1.890434] Freeing unused kernel memory: 180K
[    1.895031] This architecture does not have kernel memory protection.
[    2.480831] init: Console is alive
[    2.484632] init: - watchdog -
[    2.674048] random: fast init done
[    4.421265] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.581947] usbcore: registered new interface driver usbfs
[    4.587741] usbcore: registered new interface driver hub
[    4.593264] usbcore: registered new device driver usb
[    4.604386] exFAT: Version 1.2.9
[    4.638205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.653970] SCSI subsystem initialized
[    4.663067] ehci-platform: EHCI generic platform driver
[    4.678793] phy phy-usbphy.0: remote usb device wakeup disabled
[    4.684854] phy phy-usbphy.0: UTMI 16bit 30MHz
[    4.689414] ehci-platform 101c0000.ehci: EHCI Host Controller
[    4.695328] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    4.703524] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    4.718396] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    4.726047] hub 1-0:1.0: USB hub found
[    4.730285] hub 1-0:1.0: 1 port detected
[    4.737552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.745608] ohci-platform: OHCI generic platform driver
[    4.751280] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    4.758243] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    4.766471] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    4.800424] hub 2-0:1.0: USB hub found
[    4.804597] hub 2-0:1.0: 1 port detected
[    4.823844] usbcore: registered new interface driver usb-storage
[    4.834646] usbcore: registered new interface driver uas
[    4.841043] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.849852] init: - preinit -
[    6.025205] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.363867] mount_root: loading kmods from internal overlay
[    7.454353] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    7.467287] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    7.923747] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 415
[    7.952499] UBIFS (ubi0:1): recovery needed
[    8.131901] UBIFS (ubi0:1): recovery completed
[    8.136560] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    8.144595] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    8.154739] UBIFS (ubi0:1): FS size: 105644032 bytes (100 MiB, 832 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[    8.165589] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    8.172361] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DBB4A8C6-5C54-4C4D-95A3-3B2E8C063C70, small LPT model
[    8.184594] UBIFS (ubi0:1): full atime support is enabled.
[    8.193413] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    8.205090] block: extroot: not configured
[    8.209546] UBIFS (ubi0:1): un-mount UBI device 0
[    8.214462] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    8.245888] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 418
[    8.311536] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    8.319546] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    8.329713] UBIFS (ubi0:1): FS size: 105644032 bytes (100 MiB, 832 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[    8.340566] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    8.347338] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID DBB4A8C6-5C54-4C4D-95A3-3B2E8C063C70, small LPT model
[    8.360468] UBIFS (ubi0:1): full atime support is enabled.
[    8.746766] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    8.758756] block: extroot: not configured
[    8.765878] mount_root: switching to ubifs overlay
[    8.854201] urandom-seed: Seeding with /etc/urandom.seed
[    8.997253] procd: - early -
[    9.000310] procd: - watchdog -
[    9.630432] procd: - watchdog -
[    9.634007] procd: - ubus -
[    9.684621] procd: - init -
[   10.248134] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.307850] tun: Universal TUN/TAP device driver, 1.6
[   10.313092] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   10.344524] l2tp_core: L2TP core driver, V2.0
[   10.360445] l2tp_netlink: L2TP netlink interface
[   10.370034] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   10.402338] gre: GRE over IPv4 demultiplexor driver
[   10.424726] ip_gre: GRE over IPv4 tunneling driver
[   10.453404] ip6_gre: GRE over IPv6 tunneling driver
[   10.496814] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.564373] nos track reserve mem nil.
[   10.568212] nf_conntrack_init_start: nos track init failed. -12, ignore!!!
[   10.575526] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   10.878868] Netfilter messages via NETLINK v0.30.
[   10.906453] ip_set: protocol 6
[   11.052631] u32 classifier
[   11.055403]     input device check on
[   11.059211]     Actions configured
[   11.091559] Mirror/redirect action on
[   11.117801] fuse init (API version 7.26)
[   11.150797] {natcap}:natcap_init(): version: 5.0.0
[   11.155705] {natcap}:natcap_init(): natcap_major=251, natcap_minor=0
[   11.207693] Bridge firewalling registered
[   11.214411] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   11.222665] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   11.254781] Ebtables v2.0 registered
[   11.262427] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.375001] ctnetlink v0.93: registering with nfnetlink.
[   11.513532] usbcore: registered new interface driver usblp
[   11.575018] xt_time: kernel timezone is -0000
[   11.793896] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   11.805886] mt76x2e 0000:01:00.0: ROM patch already applied
[   11.813258] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   11.818938] mt76x2e 0000:01:00.0: Build: 1
[   11.823119] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   11.839774] mt76x2e 0000:01:00.0: Firmware running!
[   11.845835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.876993] PPP generic driver version 2.4.2
[   11.894620] PPP MPPE Compression module registered
[   11.974328] NET: Registered protocol family 24
[   11.981080] PPTP driver version 0.8.5
[   12.010702] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   12.062211] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "Factory"
[   12.069604] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[   12.077592] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[   12.085290] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   12.119889] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.832449] 8021q: adding VLAN 0 to HW filter on device eth0
[   21.845719] device eth0 entered promiscuous mode
[   21.859062] br-lan: port 1(eth0.1) entered blocking state
[   21.864832] br-lan: port 1(eth0.1) entered disabled state
[   21.870847] device eth0.1 entered promiscuous mode
[   21.891264] br-lan: port 1(eth0.1) entered blocking state
[   21.896790] br-lan: port 1(eth0.1) entered forwarding state
[   21.903393] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   22.830178] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   29.142355] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
[   29.151164] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
[   34.015558] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
[   34.528543] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
[   34.549844] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 1, phase=3e)
[   34.560082] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
[   34.581370] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 3, phase=3d)
[   34.590727] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
[   35.100418] ieee80211 phy1: rt2800_rxiq_calibration: Warning - Wait MAC Status to MAX !!!
[   35.121106] ieee80211 phy1: rt2800_rxiq_calibration: Warning - RXIQ calibration FAIL
[   35.139300] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=5, Ph_rx=-3
[   35.155476] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   35.570570] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.582402] br-lan: port 2(wlan1) entered blocking state
[   35.587910] br-lan: port 2(wlan1) entered disabled state
[   35.593802] device wlan1 entered promiscuous mode
[   35.633543] br-lan: port 3(wlan0) entered blocking state
[   35.639073] br-lan: port 3(wlan0) entered disabled state
[   35.644980] device wlan0 entered promiscuous mode
[   46.370517] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   46.377320] br-lan: port 2(wlan1) entered blocking state
[   46.382748] br-lan: port 2(wlan1) entered forwarding state
[   55.330551] random: crng init done
[   72.998030] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   73.004811] br-lan: port 3(wlan0) entered blocking state
[   73.010245] br-lan: port 3(wlan0) entered forwarding state
[  102.467428] ------------[ cut here ]------------
[  102.472174] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 0x8028c78c
[  102.479391] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[  102.486492] Modules linked in: rt2800soc rt2800pci rt2800mmio rt2800lib pppoe ppp_async l2tp_ppp rt2x00soc rt2x00pci rt2x00mmio rt2x00lib pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_conntrack_pptp mt76x2e mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iprange xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CLASSIFY usblp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4
[  102.559734]  nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_log_ipv4 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan iptable_mangle iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 crc_itu_t crc_ccitt compat br_netfilter natcap fuse sch_cake act_connmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nf_nat nf_conntrack ip6t_rt ip6t_frag ip6t_hbh ip6t_eui64 ip6t_mh ip6t_ah ip6t_ipv6header ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos ip6_gre ip_gre gre ifb sit l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip6_tunnel tunnel6 tunnel4 ip_tunnel tun vfat fat autofs4 nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 sha256_generic sha1_generic seqiv jitterentropy_rng drbg hmac ghash_generic gf128mul gcm ecb ctr cmac uas mmc_block usb_storage mmc_core leds_gpio ohci_platform ohci_hcd ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 jbd2 mbcache exfat usbcore nls_base usb_common aead crypto_null cryptomgr crc32c_generic crypto_hash
[  102.722469] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.77 #0
[  102.728342] Stack : 804275ea 00000031 00000000 00000001 00000000 00000000 00000000 00000000
[  102.736891]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  102.745449]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  102.754010]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  102.762583]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  102.771143]         ...
[  102.773641] Call Trace:
[  102.775968] [<8000dd68>] 0x8000dd68
[  102.779544] [<8000dd68>] 0x8000dd68
[  102.783104] [<80022bf4>] 0x80022bf4
[  102.786667] [<8028c78c>] 0x8028c78c
[  102.790239] [<80022c2c>] 0x80022c2c
[  102.793885] [<80243b14>] 0x80243b14
[  102.797523] [<8028c78c>] 0x8028c78c
[  102.801083] [<80035aac>] 0x80035aac
[  102.804639] [<8028c618>] 0x8028c618
[  102.808215] [<8005751c>] 0x8005751c
[  102.811776] [<80005390>] 0x80005390
[  102.815332] [<80057764>] 0x80057764
[  102.818906] [<8004e694>] 0x8004e694
[  102.822527] [<8002562c>] 0x8002562c
[  102.826087] [<8005225c>] 0x8005225c
[  102.829661] [<8004de2c>] 0x8004de2c
[  102.833222] [<800093f8>] 0x800093f8
[  102.836775] 
[  102.838309] ---[ end trace 24975a3d2914ff7e ]---
[  102.843031] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  102.849357] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  102.855498] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c3b000, max=128, ctx=67, dtx=67, fdx=38, next=67
[  102.866082] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c5d000, max=128, calc=116, drx=119
[  106.206107] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  106.212445] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  106.218617] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c5d000, max=128, ctx=97, dtx=97, fdx=48, next=97
[  106.229206] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c3b000, max=128, calc=13, drx=14
[  108.596675] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  108.603022] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  108.609209] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c3b000, max=128, ctx=70, dtx=70, fdx=31, next=70
[  108.619794] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c5d000, max=128, calc=114, drx=115
[  111.039740] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  111.046073] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  111.052244] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c5d000, max=128, ctx=45, dtx=45, fdx=32, next=45
[  111.062833] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c3b000, max=128, calc=108, drx=109
[  140.327210] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  140.333546] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  140.339714] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c3b000, max=128, ctx=55, dtx=55, fdx=6, next=55
[  140.350209] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c5d000, max=128, calc=18, drx=19
[  144.560456] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  144.566793] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  144.572960] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c5d000, max=128, ctx=97, dtx=97, fdx=32, next=97
[  144.583544] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c3b000, max=128, calc=90, drx=91
[  148.800531] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[  148.806878] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
[  148.813048] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=06c3b000, max=128, ctx=19, dtx=19, fdx=16, next=19
[  148.823631] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06c5d000, max=128, calc=101, drx=102

多拨配置问题咨询

Hi Team,

我按照官网的指示配置多拨，但是发现报错

我看了下接口的配置如下：

能帮我看看是不是我哪里配置的有问题， 感谢！

BR
Robin

R7800与intel 9560ac吞吐量问题

刷了最新版X-Wrt并启用160MHz，与intel 9560ac协商速度成功为1.5或1.7Gbps，但用iperf测试的吞吐量和80Mhz没啥区别，电脑测得上传500Mbps，下载350Mbps

官方合并这个修改了吗？

我是想买路由 但是R7那边好像哀鸿遍野

有没有可用的去广告插件啊，谢谢了

Is your feature request related to a problem? Please describe.
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]

Describe the solution you'd like
A clear and concise description of what you want to happen.

Describe alternatives you've considered
A clear and concise description of any alternative solutions or features you've considered.

Additional context
Add any other context or screenshots about the feature request here.

希望开放imagebuilder下载

RT，这样能够在x-wrt的基础上自定义修改化的rom包。谢谢