woobagooba / navico Goto Github PK

EDIT ROUTE page lacks ability to start navigating a route direct to any route waypoint OR along any route leg.

One can only start navigating a route directly to the first waypoint in a route.

For a variety of reasons, we often need to re-start navigation along a route. The work around is to manually start navigation to each subsequent waypoint of the route.

Entering a depth offset into one of several installed T41s, the offset is only applied to the T41 at which the offset was entered.

Starting route navigation from the EDIT ROUTE page is not a logical thing to do.

Please add a timer to count down to a specific time of day. Very useful for "pursuit starts".

Document the specifics of when a waypoint is considered to be “arrived” and switching to next waypoint in the route.

Its not just the arrival circle.

Exported GPX files are not valid per the GPX 1.1 XML schema. Navico is not adhering to proper GPX format.

Highlighting a route leg on chart does not offer a START NAVIGATING ROUTE ALONG LEG option.

The difference between start route along leg to next waypoint and start route direct to next route waypoint is the cross track error.

Having to get into the edit screen of a dozen or more routes to confirm they are not displayed … this is not acceptable.

I have not confirmed this, but this issue MAY be the cause of issue #2.

There needs to be an easier way to TURN OFF DISPLAY OF ALL ROUTES excepting the active navigation route.

Waypoints disappear from route.

Route edited, waypoint added to the route, route saved. Subsequent examination of route, the waypoint is gone.

Seems to occur particularly when a closed course / route is used. Example route: START, WP1, WP2, START. Waypoint START disappears from the route.

Tools->Satellites->GPS Source. Press Change. No Devices are available for selection.

The unit seems to have lost contact with its internal GPS RX?

Highlighting a route waypoint on chart and pulling up its context menu will offer an option to start navigating route direct to that waypoint ONLY if that waypoint is contained in a single route. If that waypoint is contained in multiple routes, a random single route is offered for navigation (usually not the one desired).

Product is difficult to use and buggy. And will take too much of my time to explain it.

I am happy to provide my waypoint / route / track data and you can try yourself.

Having to MANUALLY set the navigation route to display on screen is not acceptable.

True wind angle and true wind speed seem correctly displayed on the T41s, but are significantly different in the Z7T Sailsteer display.

Example: T41 displays TWS/TWA of 10/168 (correct), Z7T Sailsteer displays “---“ and 224.