winflo / squeezelite Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/squeezelite
License: Other
Automatically exported from code.google.com/p/squeezelite
License: Other
Is it possible to get this working on FreeBSD. I do not know much about
programming, but am more than willing to test it on my machines. Squeezelite
on Freebsd would make a very small installation.
Thanks
Original issue reported on code.google.com by [email protected]
on 18 Apr 2013 at 9:48
Hi,
squeezelite expects the operand HOST. However, this operand, as well as all
other parameters, is optional. It would make more sense to handle this option
as a parameter, like
squeezelite -s HOST
or so.
Best Regards
Original issue reported on code.google.com by [email protected]
on 17 May 2013 at 5:28
What steps will reproduce the problem?
1. squeezelite -l shows "null" device
2. squeezelite -n test -o null -d all=info
3. "top" in another shell shows 96% cpu load
Procedure tested on x86-64 and armv5te executable
Output to pulseaudio results in much lower cpu load
What is the expected output? What do you see instead?
Expected Output would be low cpu load.
What version of the product are you using? On what operating system?
Version 1.1, Linux x86-64, armv5te
Background:
I would like to have a software squeeze player to be able to feed the stream
from the server to a DLNA Renderer. Is there maybe a simple way to bypass all
output and transcoding stuff in squeezelite? Thank you.
Original issue reported on code.google.com by [email protected]
on 16 Apr 2013 at 2:35
May I add MusePack and Wavepack support to desired features
Cheers
Original issue reported on code.google.com by [email protected]
on 20 Apr 2013 at 6:25
It would be nice to support an LCD display via lcdproc.
(I had a quick go at it but was unable to find out how to get LMS to send vfdc
packets -- I'm guessing these are what is needed?)
Original issue reported on code.google.com by [email protected]
on 20 Mar 2013 at 5:15
What steps will reproduce the problem?
1. Starting up Squeezelite
2.
3.
What is the expected output? What do you see instead?
Default
What version of the product are you using? On what operating system?
1.1 on ArchLinux
Please provide any additional information below.
When I load up SqueezeLite, I can see it in the LMS and it works just fine
playing everything I want. Then after little more than 1 min, I can't see the
player anymore in LMS, so in order for it to come back , I have to start the
service again. It will then crash after little more than 1 min again, and I can
keep doing this, to hear music.
Original issue reported on code.google.com by [email protected]
on 25 Apr 2013 at 11:13
What steps will reproduce the problem?
1. play a flac
2. Using latest version of squeezelite
$ ./squeezelite-x86-64 -n squeezelite -d streaming=debug -d
hw:CARD=Interface,DEV=0 (tried plughw and other ALSA devices)
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Ubuntu LTS 12.04 64bit
Ayre QB9 async usb dac
Logitech Media Server Version: 7.7.2 -
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 21 Dec 2012 at 10:10
Attachments:
What steps will reproduce the problem?
1. ls -al /usr/lib
lrwxrwxrwx 1 root root 16 Sep 9 04:36 libfaad.so.2 ->
libfaad.so.2.0.0
-rwxr-xr-x 1 root root 283156 Sep 9 04:35 libfaad.so.2.0.0
2. Run
squeezelite -m ab:cd:ef:12:34:56 -n wr703n -s 192.168.1.2 -d decode=info
[04:52:06.344784] decode_init:129 init decode
[04:52:06.366447] load_faad:579 dlerror: File not found
[04:52:06.367040] load_vorbis:257 dlerror: File not found
[04:52:06.367499] load_flac:214 dlerror: File not found
[04:52:06.367912] register_pcm:352 using pcm
[04:52:06.368325] load_mad:309 dlerror: File not found
[04:52:06.374109] load_mpg:243 loaded libmpg123.so.0
[04:52:06.396687] decode_flush:181 decode flush
[04:52:06.403053] decode_flush:181 decode flush
What is the expected output? What do you see instead?
libfaad.so.2 should be loaded.
What version of the product are you using? On what operating system?
OpenWrt AA squeezelite-mips-ar71xx v. 1.2.
Original issue reported on code.google.com by [email protected]
on 9 Sep 2013 at 4:53
What steps will reproduce the problem?
1. Start squeezelite-i386 v1.2
2. Play some audio and after a while press stop to stop playing sound
3. Keep the machine running for some time
4. Again try to play some audio
5. Notice that audio seem to be playing but there is no actual audio output on
the system
What is the expected output? What do you see instead?
Expected audio output but got none although the player seems to be playing
What version of the product are you using? On what operating system?
squeezelite-i386 v1.2 on Ubuntu 12.04.3 LTS \n \l
The issue is solved when squeezelite-i386 is restarted
The process is started for /etc/rc.local using
/usr/local/bin/squeezelite-i386 -n Kantoor -d all=debug -f
/var/log/squeezelite.log -z -a 80 192.168.178.200
But also the following rule has the issue /usr/local/bin/squeezelite-i386 -n
Kantoor -z -a 80 192.168.178.200
Note: When using version 1.1 i never noticed this issue but it it not running
24x7
Original issue reported on code.google.com by [email protected]
on 26 Sep 2013 at 8:12
What steps will reproduce the problem?
1.Play 16-44 file (OK sound)
2.Play 2496 file (Not OK -High speed, high pitch)
3.Play 16-44 file (Not OK - Low speed, low pitch)
What is the expected output? What do you see instead?
If bit-rate is changed, the speed of playback changes. If you stick with one
bit-rate (when LMS is restarted), then its ok speed, unti you change song to
another bit-rate again.
What version of the product are you using? On what operating system?
Local Player v1.2 (Squeezelite)
LMS 7.8
OSX Lion 10.7
Please provide any additional information below.
I run USB out of MAC Mini into a USB/Coax converter, then to DAC.
Same problem comes up if I output via HDMI to the TV instead
I understand this is related to issue #11:
http://code.google.com/p/squeezelite/issues/detail?id=11
But I could not understand the "work-around". Do I need to update PortAudio, if
so, how?
Original issue reported on code.google.com by [email protected]
on 2 Aug 2013 at 6:49
What steps will reproduce the problem?
1. Play some Album.
2. After the Album finished to nothing for the next few hours (over night).
3. Start playing some music.
What is the expected output? What do you see instead?
Music is expected. Instead there is silcence, after about 30 s there comes
computer garbage sound (nothing like music).
What version of the product are you using? On what operating system?
I'm using git latest (8f0e4f2aa0f7) on TL-MR3020 running OpenWrt Attitude
Adjustment.
Please provide any additional information below.
If I first power off the device (via LMS) and then start playing music
everything is fine. So I guess power off does some kind of Alsa disconnect and
would assume an Alsa Disconnect after playback is finished would fix the
problem.
Btw: There is no spectacular info in the log, unfortunately...
Original issue reported on code.google.com by [email protected]
on 18 Jun 2013 at 5:53
What steps will reproduce the problem?
1. squeezelite running on remote host, external to firewalled/NAT'ed LMS local
ip 192.168.1.10
2. ports 9000, 9005, 3483 tunneled thru firewall to NAT'ed LMS server
3. play spotify stream
What is the expected output? blessed joy of hearing Spotify stream
What do you see instead?
[12:24:06.419613] test_open:159 playback open error: Invalid argument
[12:24:06.419697] output_init:1359 unable to open output device
[user@host ~/squeezelite]$ ./squeezelite -d all=debug -o front 127.0.0.1
[12:24:08.926641] stream_init:264 init stream
[12:24:08.926812] stream_init:265 streambuf size: 2097152
[12:24:08.927992] output_init:1305 init output
[12:24:08.928045] output_init:1308 outputbuf size: 3528000
[12:24:08.928102] output_init:1340 requested buffer_time: 20000 period_count: 4
format: any mmap: 1
[12:24:08.942427] output_init:1366 output: front maxrate: 192000
[12:24:08.942478] output_init:1374 unable to lock memory: Cannot allocate memory
[12:24:08.944531] output_init:1397 unable to set output sched fifo: Operation
not permitted
[12:24:08.944551] decode_init:101 init decode
[12:24:08.944599] output_thread:583 open output device: front
[12:24:08.946530] load_faad:557 loaded libfaad.so.2
[12:24:08.951665] load_vorbis:234 loaded libvorbisfile.so.3
[12:24:08.953621] load_flac:196 loaded libFLAC.so.8
[12:24:08.953632] register_pcm:191 using pcm
[12:24:08.954670] load_mad:292 loaded libmad.so.0
[12:24:08.954721] slimproto:683 connecting to 127.0.0.1:3483
[12:24:08.955032] slimproto:705 connected
[12:24:08.955045] slimproto:721 local player
[12:24:08.955057] sendHELO:109 mac: 00:23:ae:7f:94:3f
[12:24:08.955068] sendHELO:111 cap:
Model=squeezelite,ModelName=SqueezeLite,AccuratePlayPoints=1,HasDigitalOut=1,Max
SampleRate=192000,aac,ogg,flc,aif,pcm,mp3,loc
[12:24:08.955439] alsa_open:269 opened device front using format: S32_LE sample
rate: 44100 mmap: 1
[12:24:08.955521] alsa_open:317 buffer time: 20317 period count: 4 buffer size:
896 period size: 224
[12:24:08.957406] ALSA snd_pcm_hw_start:587 SNDRV_PCM_IOCTL_START failed (-32)
[12:24:08.981454] process:407 strm
[12:24:08.981473] process_strm:219 strm command q
[12:24:08.981486] output_flush:1411 flush output buffer
[12:24:08.981502] sendSTAT:151 STAT: STMf
[12:24:09.016477] process:407 audg
[12:24:09.016495] process_audg:355 audg gainL: 20992 gainR: 20992 adjust: 1
[12:24:09.016513] process:407 strm
[12:24:09.016525] process_strm:219 strm command s
[12:24:09.016536] process_strm:284 strm s autostart: 3 transition period: 10
transition type: 0
[12:24:09.016549] sendSTAT:151 STAT: STMf
[12:24:09.016604] codec_open:150 codec open: 'p'
[12:24:09.016614] pcm_open:172 pcm size: 2 rate: 44100 chan: 2 bigendian: 0
[12:24:09.016630] stream_sock:352 connecting to 192.168.1.10:9005
hangs for 3 minutes...
[12:27:18.004859] stream_sock:355 unable to connect to server
What version of the product are you using? On what operating system?
squeezelite-i386 1.1 4/12/2013 Linux Mint 14
Internet radio and music files play fine
Original issue reported on code.google.com by [email protected]
on 22 Apr 2013 at 4:50
It would be great to be able to output into jack. I wanted to run a software
crossover and equalizer. It seems jack is much better suited than trying to
route things around in alsa, especially when it comes to synchronisation.
Original issue reported on code.google.com by [email protected]
on 12 Sep 2013 at 12:00
On my raspberry pi I get the following in my log file when I try and run
squeezelite.
Any help appreciated.
[14:08:07.503031] stream_init:264 init stream
[14:08:07.504570] stream_init:265 streambuf size: 2097152
[14:08:07.518935] output_init:1337 init output
[14:08:07.522350] output_init:1340 outputbuf size: 3528000
[14:08:07.522706] output_init:1372 requested alsa_buffer: 40 alsa_period: 4
format: any mmap: 1
[14:08:07.618201] output_init:1398 output: sysdefault:CARD=ALSA maxrate: 384000
[14:08:07.652577] output_init:1408 memory locked
[14:08:07.653518] output_thread:601 open output device: sysdefault:CARD=ALSA
[14:08:07.656193] output_init:1431 set output sched fifo rt: 45
[14:08:07.656411] decode_init:129 init decode
[14:08:07.663367] alsa_open:270 opened device sysdefault:CARD=ALSA using
format: S32_LE sample rate: 44100 mmap: 1
[14:08:07.665596] alsa_open:335 buffer: 40 period: 4 -> buffer size: 1760
period size: 440
[14:08:07.668396] ALSA snd_pcm_hw_start:587 SNDRV_PCM_IOCTL_START failed (-32)
[14:08:07.683053] load_faad:583 loaded libfaad.so.2
[14:08:07.718843] load_vorbis:275 loaded libvorbisfile.so.3
[14:08:07.741623] load_flac:235 loaded libFLAC.so.8
[14:08:07.741870] register_pcm:352 using pcm
[14:08:07.754191] load_mad:332 loaded libmad.so.0
*** glibc detected *** /usr/bin/squeezelite-armv6hf: free(): invalid pointer:
0xbeeeaede ***
Original issue reported on code.google.com by [email protected]
on 16 Aug 2013 at 1:41
What steps will reproduce the problem?
1. Just start squeezelite
2. Don't play anything, so in case something is playing stop it.
What is the expected output? What do you see instead?
No CPU load at all when no audio is playing. However there is still the same
constant 10% CPU load, even when nothing is played back. By changing the output
I can reduce the CPU load, but still the load won't change when playing back
audio compared to when paused.
What version of the product are you using? On what operating system?
Ubuntu, x86-64, squeezelite 1.1
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 3 Jul 2013 at 8:59
Would it be possible for you to compile a version for Debian on a GoFlex
(ARM5te)?
Original issue reported on code.google.com by [email protected]
on 1 Dec 2012 at 11:59
It would be great to be able to output into jack. I wanted to run a software
crossover and equalizer. It seems jack is much better suited than trying to
route things around in alsa, especially when it comes to synchronisation.
Original issue reported on code.google.com by [email protected]
on 12 Sep 2013 at 12:09
What steps will reproduce the problem?
1. Start squeezelite playing streaming radio goes into a high pitch double
speed mode.
2. Kill process and play any mp3 and the sound is good.
3. Tune into a streaming radio station and back to double-time again.
4. The only way to stop it is to kill the process.
What version of the product are you using? On what operating system?
Your latest arm6hf binary on Raspi.
Please provide any additional information below.
Using a Creative Play USB DAC.
Thanks
Original issue reported on code.google.com by [email protected]
on 25 Jul 2013 at 9:23
- I have a USB DAC that gives me 4 stereo output devices.
- If I run squeezelite with the -o option on Linux, it lists my DACs 4 audio
output channels (along with other default audio outputs)
- When launching squeezelite, I can only link it to the my DAC's first audio
output when I enter the name.
Note, on a Mac, using the -o option lists all output devices with a unique
number that can be used to specify the audio output device to run, and I can
successfully associate any of them.
Original issue reported on code.google.com by [email protected]
on 20 Aug 2013 at 8:59
I'd love to properly integrate this into XBMC without having to maintain a
fork. Any thoughts on how you'd prefer to handle this?
Original issue reported on code.google.com by [email protected]
on 15 Dec 2012 at 2:52
I'm planning a diy whole house audio solution and would like to be able to
power amps on and off when the squeezelite player is turned on/off.
I see in output.c that you're receiving the power on/off press. It would be
great if there was a command line option for a script that would be ran on each
on/off press. I can build the script, it just needs to be called with the
player name and on or off.
My script would hook this into a Denkovi USB -> 4 port relay card which would
control power to the amps. The script would handle the mapping of which
squeezelite name is mapped to which relay port.
Essentially I can do some pretty good scripting but coding in C is not my forte.
Thanks,
Daniel
Original issue reported on code.google.com by [email protected]
on 31 Dec 2012 at 2:05
I would like to request a MIPS BCM47xx build specifically for TomatoUSB
(entware and/or optware). Please consider it. Thanks
Original issue reported on code.google.com by [email protected]
on 23 Apr 2013 at 7:14
What steps will reproduce the problem?
1. Play something
2. Wait for a while
What is the expected output? What do you see instead?
Songs playing normally, then after 10/12 hours of flawless playback the sound
stop working and a crackling sound starts popping every 10 seconds
What version of the product are you using? On what operating system?
version 1.0
Linux multilite 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l
GNU/Linux
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Mar 2013 at 7:47
running on a Mikrotik RB411
root@OpenWrt:/# ./squeezelite-mips-ar71xx -o front:CARD=default,DEV=0
192.168.0.45
Generates the following
./squeezelite-mips-ar71xx: can't resolve symbol 'pthread_mutexattr_setprotocol'
Regards
Jman
Original issue reported on code.google.com by [email protected]
on 26 Apr 2013 at 4:07
I'm running Squeezelite v0.9beta10.
There is no way to specify the pulseaudio server when using pulseaudio output
via "-o pulse". Instead, the PULSE_SERVER environmental variable must be used
as a workaround.
It would be useful if there was support for this with a separate flag or via -o
pulse:hostname
Original issue reported on code.google.com by [email protected]
on 25 Jan 2013 at 8:29
Openelec above Version 3.0.3 uses libasound 1.0.27, which breaks squeezelites
functionality, as it seems to expect version 1.0.25
Can we have a build against the newer libasound please? (Or a hint to how to do
it ourself)?
/ Thomas
Original issue reported on code.google.com by [email protected]
on 29 Jun 2013 at 9:39
What steps will reproduce the problem?
1. Install RaspberryPI using Raspbian image
2. Start squeezelite using /usr/local/bin/squeezelite-armv6hf -o default -n
Kantoor -d all=debug -f /var/log/squeezelite.log -z 192.168.110.188
3. Start playing music
What is the expected output? What do you see instead?
Normal sound output is expected but in stead it is playing garbage (seems like
audio is delayed) I`m also running sqeeuzelite on windows and ubuntu is they
are playing fine
What version of the product are you using? On what operating system?
/usr/local/bin/squeezelite-armv6hf --help
Squeezelite v1.1, Copyright 2012, 2013 Adrian Smith.
root@pi:/var/log/apt# cat /etc/issue
Debian GNU/Linux 7 \n \l
Please provide any additional information below.
Today during testing the sound seems to be okay after some time playing bad
sound. But after restarting squeezelite i cannot reproduce this and the sounds
seems to keep bad
I was using squeezelite for some weeks on the RaspberryPI without to much
problem. Maybe it is because i rebooted the unit last night, or because of
installing updates. I`m not sure what caused it.
I can play mp3 files without any issues using mpg321 (both localy and using NFS)
Original issue reported on code.google.com by [email protected]
on 22 Jun 2013 at 7:26
What steps will reproduce the problem?
1. Playback 24bit/192kHz file
What is the expected output? What do you see instead?
Expected: Normal Playback over HDMI (works on same machine/output with Decibel
for Mac for example).
Instead: slow playback with 44.1kHz
What version of the product are you using? On what operating system?
OS X 10.8.4 on a 2012 MacMini, HDMI output to NAD C 390DD digital amplifier,
squeezelite 1.2 (1.1 had the same problem),
LMS 7.7.2
Original issue reported on code.google.com by [email protected]
on 18 Aug 2013 at 1:56
What steps will reproduce the problem?
1. Install 5c706faa3e3c on OpenWRT Attitude Adjustment (current) (TP-Link
MR3020)
2. Setup Spotify in LMS
3. Play a Title from Spotify
What is the expected output? What do you see instead?
Output of Spotify Title. Silence.
What version of the product are you using? On what operating system?
See above.
Please provide any additional information below.
...
Original issue reported on code.google.com by [email protected]
on 26 Dec 2012 at 8:31
What steps will reproduce the problem?
1. With a PC with 2 sound cards installed, set one as the default and open
Squeezeplay. Let it play music through the squeezebox server as normal
2. Open Squeezelite with the command line "squeezelite-win.exe -n Bathroom -m
00:00:00:00:00:01 -o 11 -d all=sdebug 192.168.1.10" where -o 11 is the speaker
output of the 2nd soundcard.
3. The following log output is produced:
[16:33:00.608] stream_init:264 init stream
[16:33:00.608] stream_init:265 streambuf size: 2097152
[16:33:00.609] output_init:1286 init output
[16:33:00.609] output_init:1289 outputbuf size: 3528000
[16:33:00.609] output_init:1326 requested latency: 0
[16:33:00.785] output_init:1343 output: 11 maxrate: 48000
[16:33:00.787] _pa_open:510 error opening device 11 - Speakers (SB 5.1 VX) :
Invalid device
[16:33:00.787] decode_init:101 init decode
[16:33:00.788] pa_probe:448 probing device 11
[16:33:00.788] load_faad:534 dlerror: code: 126
[16:33:00.789] load_vorbis:212 dlerror: code: 126
[16:33:00.791] load_flac:196 loaded libFLAC.dll
[16:33:00.791] register_pcm:191 using pcm
[16:33:00.793] load_mad:269 dlerror: code: 126
[16:33:00.795] load_mpg:204 loaded libmpg123-0.dll
[16:33:00.836] pa_probe:454 found
[16:33:00.837] _pa_open:510 error opening device 11 - Speakers (SB 5.1 VX) :
Invalid device
[16:33:00.838] pa_probe:448 probing device 11
[16:33:00.839] slimproto:669 connecting to 192.168.1.10:3483
[16:33:00.843] slimproto:691 connected
[16:33:00.843] sendHELO:109 mac: 00:00:00:00:00:01
[16:33:00.843] sendHELO:111 cap:
Model=squeezelite,ModelName=SqueezeLite,AccuratePlayPoints=1,HasDigitalOut=1,Max
SampleRate=48000,flc,aif,pcm,mp3
[16:33:00.844] sendSETDName:210 set playername: Bathroom
[16:33:00.868] pa_probe:448 probing device 11
[16:33:00.898] pa_probe:454 found
[16:33:00.899] _pa_open:510 error opening device 11 - Speakers (SB 5.1 VX) :
Invalid device
[16:33:00.900] pa_probe:448 probing device 11
[16:33:00.918] pa_probe:448 probing device 11
[16:33:00.953] pa_probe:454 found
[16:33:00.954] _pa_open:510 error opening device 11 - Speakers (SB 5.1 VX) :
Invalid device
What is the expected output? What do you see instead?
A second squeezebox player should start called 'Bathroom' outputting to the 2nd
sound card ("SB 5.1 VX") in this instance. Instead no sound comes out and the
above log states invalid device.
What version of the product are you using? On what operating system?
v1.0rc2 on Windows 8 Pro 64-bit
Please provide any additional information below.
Note that squeezelite works fine if the 2nd sound card is set as the main sound
card in Windows and squeezelite is started without specifying any output.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2013 at 4:43
Hello,
I maintain the Gentoo ebuild for this
(http://git.overlays.gentoo.org/gitweb/?p=user/squeezebox.git;a=summary).
Gentoo, of course, wants to build from source so having an archive with the
source is necessary.
I've previously been downloading an archive generated on-the-fly from a git
commit that I hope corresponds to the version you've released binaries of, but
this has exposed a problem.
Google code seems to generate the archives on the fly and they seem to be
subtly different sometimes even when generated from the same commit. This
causes the Gentoo ebuild to fail because I have to store a hash of the expected
archive contents to ensure the archive is downloaded correctly.
So, in summary, could you commit a tarball of the source corresponding to the
current version to the 'downloads' section in the same way as you do for the
binary releases, please?
Thanks in advance if you're able to do this.
Original issue reported on code.google.com by [email protected]
on 21 Apr 2013 at 6:50
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 9 Jan 2013 at 9:04
What steps will reproduce the problem?
1. Play a song A at rate X (say 44 kHz)
2. Play system sound (like the beep of a volume change)
3. Play a new song B of a different rate Y (say 96 kHz)
What is the expected output? What do you see instead?
Normal play, but song B is played at the speed X (in this example: high pitch,
donald duck voice).
To get sound working again:
4. Play song A again (sounds far too low)
5. Play song B again (sounds allright).
From this point I can play anything at any rate, as long as no system sounds
are mixed in.
What version of the product are you using? On what operating system?
Squeezelite v0.9beta11
Compiled myself from source (64 bit)
Mac mini, OS X 10.7.5 (Lion)
Please provide any additional information below.
No external DAC, only system audio.
Portaudio (pa_stable_v19_20111121) might be the cause.
Original issue reported on code.google.com by [email protected]
on 31 Jan 2013 at 9:20
What steps will reproduce the problem?
1.Try to use JPLAY as output device. Squeezelite is unable to open/probe the
devive
2.
3.
What is the expected output? What do you see instead?
See attached screen shot
What version of the product are you using? On what operating system?
Have tried both the latest version (1.1 and 1.2)on Windows 7, Windows 8 and
Windows Server 2012
Original issue reported on code.google.com by [email protected]
on 2 Aug 2013 at 6:49
Attachments:
It'd like to specify external commands via command line, which are called on
Alsa connect and disconnect. I'd like use those commands to turn on and off my
external amplifier...
Thanks!
Original issue reported on code.google.com by [email protected]
on 23 Aug 2013 at 9:49
Hi,
it seems that squeezelite will automatically switch to auto-discovery mode, if
the HOST is not reachable (e.g. if startet at boot but network not ready).
This will become a trouble when more than one mediaserver is present within the
network.
Best Regards
Original issue reported on code.google.com by [email protected]
on 17 May 2013 at 5:31
What steps will reproduce the problem?
1. Login to router with Openwrt Attitude Adjustment
2. update system
3. try to install squeezelite
What is the expected output? What do you see instead?
- installed package
- Collected errors:
* deb_extract: /tmp/opkg-31LgIV/squeezelite-mips-ar71xx: invalid magic
* pkg_init_from_file: Failed to extract control file from /tmp/opkg-31LgIV/squeezelite-mips-ar71xx.
What version of the product are you using? On what operating system?
Squeezelite 1.0 Linux ALSA mips ar71xx (openwrt)
Please provide any additional information below.
BusyBox v1.19.4 (2012-11-18 02:19:39 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (12.09-rc1, r34185)
-----------------------------------------------------
* 1/4 oz Vodka Pour all ingredients into mixing
* 1/4 oz Gin tin with ice, strain into glass.
* 1/4 oz Amaretto
* 1/4 oz Triple sec
* 1/4 oz Peach schnapps
* 1/4 oz Sour mix
* 1 splash Cranberry juice
-----------------------------------------------------
root@Achterhuis:~# opkg update
Downloading
http://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/packag
es/Packages.gz.
Inflating
http://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/packag
es/Packages.gz.
Updated list of available packages in /var/opkg-lists/attitude_adjustment.
root@Achterhuis:~# opkg install
http://squeezelite.googlecode.com/files/squeezelite-mips-ar71xx
Downloading http://squeezelite.googlecode.com/files/squeezelite-mips-ar71xx.
Collected errors:
* deb_extract: /tmp/opkg-31LgIV/squeezelite-mips-ar71xx: invalid magic
* pkg_init_from_file: Failed to extract control file from /tmp/opkg-31LgIV/squeezelite-mips-ar71xx.
root@Achterhuis:~#
Original issue reported on code.google.com by [email protected]
on 30 Mar 2013 at 6:41
What steps will reproduce the problem?
1. play e.g. http://sverigesradio.se/topsy/direkt/132-hi-mp3.m3u
2. i get distorted output
A. Other channels from other providers seems to works fine, so does e.g my own
stored flac or the sveriges radio mp3-podcasts
all streaming channels from Swedish Radio yields these distorted results
B. This channel works fine on older and current squeezelite on e.g. x86-64
What version of the product are you using? On what operating system?
tried a few versions - right now latest and greatest 0.7beta1
(7d692085e40b66d49ae4894eef62fd001f16ce69)
Please provide any additional information below.
Running on a raspberry pi through an external DA converter (Beresford) on
raspbian with hardfloat.
I can not really find the storage for older (binary) releases of this is that
available somewhere ?
Original issue reported on code.google.com by [email protected]
on 25 Dec 2012 at 10:29
I just installed your player and media center plugin on OSX and I may have some
issues. Is this the best place to start a discussion? I thought I saw an
announcement on a forum somewhere, but can't find it now.
If this is the right place, attached is my log. I can see the player in squeeze
center, however, when I try to playback something the playhead does not
advance. My squeezebox radio also doesn't function until I kill the squeezelite
process.
Original issue reported on code.google.com by [email protected]
on 4 Feb 2013 at 2:14
Attachments:
Would like to compile squeezelite (Ubuntu) statically so that libMad0, etc
libraries are included in the executable. Is this possible?
Original issue reported on code.google.com by [email protected]
on 15 Nov 2013 at 5:06
** What steps will reproduce the problem?
1. Run squeezelite output chosen as an S/PDIF device, but do not stream yet.
2. Attempt to make sound from another program on the same machine.
** What is the expected output? What do you see instead?
No audio to the device is allowed from any other program.
** What version of the product are you using? On what operating system?
squeezelite version 1.2 under Windows 7
Original issue reported on code.google.com by [email protected]
on 23 Aug 2013 at 11:16
It would be useful to have a list of deps for people who try to build this. By
trial and error I found I needed to install the following packages on my debian
wheezy (raspberry pi) distribution:
libasound2-dev
libflag-dev
libmad0-dev
libvorbis-dev
libfaad-dev
libmpg123-dev
If there are any other deps I must have had them installed already.
Original issue reported on code.google.com by [email protected]
on 3 Mar 2013 at 8:33
I have been running squeezelite on the raspberry pi for a while now (Arch
Linux). After a recent system update, I started to get bad crackling and
slowing of the audio. Log output shows a bunch of these:
[13:38:16.253615] output_thread:594 XRUN
[13:38:16.253965] ALSA snd_pcm_hw_start:590 SNDRV_PCM_IOCTL_START failed (-32)
I run squeezelite with the following line:
squeezelite-armv6 -m b8:27:eb:cb:b2:80 -n "Kitchen Player" -d all=debug -f
squeezelite.log
So I do not specify a particular audio device.
I've gotten this both with squeezelite compile from the latest source, and from
the pre-built binary from this site.
Any ideas?
George
Original issue reported on code.google.com by [email protected]
on 28 Apr 2013 at 8:30
What steps will reproduce the problem?
1.Create a shortcut for squeezelite-win.exe
2.Use the parameters 192.168.1.10 -m 00:00:00:00:00:01 (where the IP is my LMS
host)
3.Check the player mac address recorded in LMS
What is the expected output? What do you see instead?
I'm expecting the player mac address from the windows machines to show
the faked mac address, instead it shows the true mac address of the NIC that it
connected.
What version of the product are you using? On what operating system?
Using "SqueezeLite 1.1 Windows" on Windows 7 HP
Please provide any additional information below.
The same basic technique is working perfectly on a couple of Raspberry Pis I'm
using as squeeze players.
Original issue reported on code.google.com by [email protected]
on 18 Jun 2013 at 10:59
What steps will reproduce the problem?
1. Playing mp3 vbr song, nothing special.
2. /opt/squeezelite/squeezelite-i386 -z -o "hw:CARD=D1,DEV=0" 127.0.0.1
3.
What is the expected output? What do you see instead?
Music playback suddenly stopped mid-song
htop revealed squeezelite was looping
What version of the product are you using? On what operating system?
squeezelite-i386 v1.0 also saw another time on rc2
Linux Mint Maya 3.2.0-25-generic on Aspire One 1GB ram
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2013 at 9:10
The armv6hf squeezelite version 1.0rc2 seems to leak memory. I've seen this
with the previous version I had installed as well (I think it was 0.96? I can't
remember). The kernel's OOM killer kills the task when it reaches about 250 MB.
The only output I have at the moment is the OOM messages; I realize that's not
very helpful, so I'll gladly give you any other information that you may need,
jet let me know what to do to get it.. Maybe run a debug version? It seems to
reproduce all the time here now (after running for about a day), so it's a good
opportunity to debug it.
Thanks!
Alex
Original issue reported on code.google.com by [email protected]
on 11 Feb 2013 at 9:49
Attachments:
What steps will reproduce the problem?
1. Run squeezelite-mips-ar71xx without debug enabled.
2. The program runs but do nothing.
What is the expected output? What do you see instead?
The program should start.
What version of the product are you using? On what operating system?
OpenWrt AA squeezelite-mips-ar71xx v. 1.2.
Please provide any additional information below.
If the program started with debug enabled, the it runs fine.
squeezelite -m ab:cd:ef:12:34:56 -n wr703n -s 192.168.1.2 -d de
code=info.
Original issue reported on code.google.com by [email protected]
on 9 Sep 2013 at 4:49
What steps will reproduce the problem?
1. Running squeezelite on TP-Link MR3020 using OpenWRT and USB-Audio
2. Play Music
What is the expected output? What do you see instead?
clicking/ cracking free music. Instead there was clicking/ cracking noises from
time to time.
What version of the product are you using? On what operating system?
0.5beta1, OpenWRT Attitude Adjustment (latest)
Please provide any additional information below.
It doesn't seem to be a performance problem, as CPU-Usage is usually around
30%. Although the systems have limited RAM (32 MB).
What can I do in order to narrow down the problem (e.g. change buffer sizes -
increase? decrease?)?
Anyways: Great piece of Software - thank you Adrian!
Original issue reported on code.google.com by [email protected]
on 7 Dec 2012 at 4:16
What steps will reproduce the problem?
1. Start squeezelite (1.1) using /usr/local/bin/squeezelite-armv6hf -o
front:CARD=CODEC,DEV=0 -n Woonkamer -d all=debug -f /var/log/squeezelite.log -z
-a 80 192.168.110.188
2. Stop squeezelite (kill <pid>)
3. Start squeezelite (1.1 but also 1.3) using
/usr/local/bin/squeezelite-armv6hf -o sysdefault:CARD=CODEC -n Woonkamer -d
all=debug -f /var/log/squeezelite.log -z -a 80 192.168.110.188
What is the expected output? What do you see instead?
When starting as option 1 all plays fine except audio using the Youtube
Application of the Logitech Media Server, i get the following error in the log
[15:27:16.422841] output_thread:583 open output device: front:CARD=CODEC,DEV=0
[15:27:16.428467] alsa_open:269 opened device front:CARD=CODEC,DEV=0 using
format: S16_LE sample rate: 22050 mmap: 1
[15:27:16.429025] alsa_open:300 unable to set buffer time Invalid argument
When starting squeezelite as option 3 all audio is played (even youtube data)
but once in a while it will start stuttering.
What version of the product are you using? On what operating system?
RaspberryPI using the following audio adapter
http://www.behringer.com/EN/Products/UCA202.aspx
Note: I also have a Pi with the onboard audio connect to a amplifier and it is
playing all audio fine, so it seems to be relate to Squeezelite/AlSA ?
/usr/local/bin/squeezelite-armv6hf -o default -n Kantoor -d all=info -f
/var/log/squeezelite.log -z -a 80 192.168.110.188
/usr/bin/amixer -q set PCM 100% unmute
Please provide any additional information below.
List of audio devices on the Woonkamer PI (with issues)
root@pi:/usr/local/bin# squeezelite-armv6hf -l
Output devices:
null - Discard all samples (playback) or generate zero samples (capture)
pulse - PulseAudio Sound Server
default:CARD=ALSA - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
sysdefault:CARD=ALSA - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
default:CARD=CODEC - USB Audio CODEC, USB Audio - Default Audio Device
sysdefault:CARD=CODEC - USB Audio CODEC, USB Audio - Default Audio Device
front:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - Front speakers
surround40:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - 4.0 Surround output to Front and Rear speakers
surround41:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=CODEC,DEV=0 - USB Audio CODEC, USB Audio - IEC958 (S/PDIF) Digital Audio Output
Original issue reported on code.google.com by [email protected]
on 20 Oct 2013 at 1:43
What steps will reproduce the problem?
1.running squeezelite0.9beta
2.squeezelite0.8 is ok
3.
What is the expected output? What do you see instead?
I was able to use squeezelite0.8 fine on openwrt without any issues.
When I installed squeezelite0.9 (version which allows setting of sampling
rate), the player will stream but the sound is only noise. The audio card can
be detected using -l option.
What version of the product are you using? On what operating system?
squeezelite0.9 on openwrt (ar71xx)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Jan 2013 at 3:12
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.