SolaX X1-Hybrid G3 HV-5.0T about homeassistant-config

[mfcltd]

Have you enabled remote control on your Inverter? I had to do this when using RS485.

[siralexbox]

Upss, done, was the remote control option.
Thanks

[siralexbox]

Bu still cant find the "load/generator" value, is this calculated from the other values?
Or is there a register just for it?

[wills106]

The load / generator is "SolaX Measured Power" register 70.

[siralexbox]

Isn't register 70 the Feed in Power?
On the solax app there are different values for injected power and home load.
I have the power meter installed, to allow zero injection, is the home load value coming from this meter?
Can you point me to the registers list.
Thanks

[wills106]

As per the comment:
# Negative pulling from Grid, Positive exporting to the Grid

My setup uses a Eastron SDM230-ModBus energy meter.

There is no official register list available from SolaX

[wills106]

Closed due to no comments for over a week.