experimental/solax_test.yaml doesn't match X1 Hybrid registers via JSON API about homeassistant-config

[wills106]

I can't really give any advice or comment on anything PocketLAN / PocketWiFi as I don't own either.

If you can, I would strongly suggest you run an ethernet cable direct to your Inverter and use this https://github.com/wills106/homsassistant-solax-modbus

[M0LTE]

Hi @wills106 thanks for this.

My inverter is a X1-Hybrid-5.0-D. It does not appear to have its own onboard Ethernet - only RS485, and a USB port, into which you can plug the PocketLAN or PocketWiFi.

Are you aware of anything that's been done with the RS485 port?
Any other comments / thoughts?

[wills106]

I am guessing you have a Gen4 Inverter then if you don't have the built in Ethernet port?

If you look in the Wiki on the Integration repository there is documentation on how to use either an RS485 - USB dongle or a RS485 - Ethernet adaptor.

[M0LTE]

It's only this evening that I found that the port marked "COM/LCD" is in fact an RS485 port.

The very next resource I found after typing my last comment was the wiki describing the integration. Thank you, can't wait to see if this works. RS485 to Ethernet adapter will be here tomorrow.

[wills106]

When you get chance could you have a look at this post If your Inverter is different to that list could you reply with the details please.

Also fell free to join in any conversations on there.

[M0LTE]

Will do, thanks.

[mc4wrk]

I will, sorry to bother you but I lost your integration and now I can't reinstall it. I have received the following message "Repository wills106/homeassistant-solax-modbus not found" . This means that the integration with USB dongle modbus does not work anymore? Should I go anothwer way and try what you suggested above? RS485 to Ethernet? Thank you for reply and help. All the Best.

[mc4wrk]

I mean Will.