Collection of AVR Programmer Boards and Accessories
Simple UPDI programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers with voltage selection switch (5V and 3.3V). The programmer works with pyupdi as well as with the Arduino IDE as "SerialUPDI with 4.7k resistor or diode". It is based on the USB-to-serial chip CH340N.
Probably the simplest UPDI programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers. The programmer works with pyupdi as well as with the Arduino IDE as "SerialUPDI". It is based on the USB-to-serial chip CH330N or CH340N.
UPDI Programmer (jtag2updi) for tinyAVR, megaAVR and AVR-Dx microcontrollers built on ATmega8/88/168/328 based on the design and firmware by ElTangas.
Mini UPDI Programmer Stick (jtag2updi) for tinyAVR, megaAVR and AVR-Dx microcontrollers built on ATtiny1604/1614 based on the design and firmware by ElTangas. Program the new ATtiny devices with a new ATtiny device!
HV UPDI (High-Voltage Unified Program and Debug Interface) Programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers built on ATmega8/88/168/328 based on the design and the firmware by Dlloydev. The HV UPDI Programmer will enable you to use the additional configuration settings for the UPDI pin without the fear of getting locked out from the MCU. It features 3 programming modes: UPDI, HV or PCHV, with the target voltage at 5V.
Mini HV UPDI (High-Voltage Unified Program and Debug Interface) Programmer Stick for tinyAVR, megaAVR and AVR-Dx microcontrollers built on ATtiny1604/1614 based on the design and the firmware by Dlloydev. The Mini HV UPDI Programmer Stick will enable you to use the additional configuration settings for the UPDI pin without the fear of getting locked out from the MCU. It features 3 programming modes: UPDI, HV or PCHV, with the target voltage at 5V.
USBasp - USB ISP/TPI Programmer Stick for Atmel AVR microcontrollers with 5V and 3.3V target voltage based on the design by Thomas Fischl.
Simple USB ISP Programmer Stick for Atmel AVR microcontrollers based on the ATtiny45/85. More information can be found at https://dicks.home.xs4all.nl/avr/usbtiny/.
USBasp - USB ISP/TPI Programmer for Atmel AVR microcontrollers based on the design by Thomas Fischl.
USB ISP Programmer with buffer for Atmel AVR microcontrollers based on the design by ladyada.
Simple USB ISP Programmer for Atmel AVR microcontrollers. More information can be found at https://dicks.home.xs4all.nl/avr/usbtiny/.
USB to serial converter based on the new ch330 chip.
AVR programmer adapter for 8-pin ATtiny microcontrollers for converting:
- 6-pin ICSP connectors,
- 10-pin ICSP connectors,
- 8-pin SOP8/SOIC8 adapters,
- 8-pin SOP8/SOIC8 clips,
- 8-pin DIP8 chips.
The AVR Programmer Adapter Maxi makes it easy to program SMD ATtinys and ATmegas in SOIC-8, SOIC-14 and TQFP-32 packages.