Coder Social home page Coder Social logo

gogo-tester's People

Contributors

azzvx avatar

gogo-tester's Issues

增加人气

本人是这个软件的受益者,感谢

Original issue reported on code.google.com by langfj03 on 15 Jun 2014 at 10:43

gogo随机测试扫描不出任何ip。

先说明情况。 gogo版本是最新的2.2-3.
1.在两台电脑上测试,一台电脑是win7 
32位,电信线路。然后可正常扫描,测试。
一台电脑是win7  
64位(主要用这台),网通线路,随机测试完全扫描不出ip来�
��即使等一个小时。
2.两台电脑都启动着ddnsforwarder,所以dns已经设为127.0.0.1
3.我以为是dns的事情,把dns改回了正常的dns,同时关闭dnsforwar
der,再进行测试,还是不行。

总之就是网通线路的这台电脑完全扫描不出ip来,不太清楚是
线路问题,还是软件问题,反应一下,希望能看到,谢谢。

Original issue reported on code.google.com by wch352136 on 25 Jun 2014 at 1:54

Attachments:

感觉新版不如老版好用啊

以前用的是最开始的第一个个版本,
几天后居然发现现在这个居然成项目了,下了今天的最新版��
�觉不如老版直观好用。

Original issue reported on code.google.com by [email protected] on 15 Jun 2014 at 12:44

新版没有了导出可用ip功能

想要导出到剪切板,可是只有应用到goagnet

还好老版本我一直保留着。。。。。。。。。。

Original issue reported on code.google.com by langfj03 on 17 Jun 2014 at 12:31

Goagent 局域网使用问题,麻烦版主一下

首先感谢你提供的测试工具,确实很好用。

我在部署局域网使用的时候,
修改[listen]
#监听ip,如果需要允许局域网/公网使用,设为0.0.0.0即可
ip = 0.0.0.0

和

#二级代理,一般内网会用到
[proxy]  
#是否启用
enable = 1
autodetect = 1
#代理服务器地址
host = 192.168.1.211
#代理服务器端口
port = 8080   

运行后

------------------------------------------------------
GoAgent Version    : 3.1.18 (python/2.7.6 gevent/1.0.1 pyopenssl/0.13)
Uvent Version      : 0.3.0 (pyuv/0.11.0-dev libuv/0.11.2-pre)
Listen Address     : 0.0.0.0:8087
Local Proxy        : 192.168.1.211:8080
GAE Mode           : https
GAE Profile        : ipv4
GAE APPID          : ******
Pac Server         : http://192.168.1.211:8086/proxy.pac
Pac File           : file://Z:\goagent\goagent-3.1.18\local\proxy.pac
DNS Listen         : 192.168.1.211:53
DNS Servers        : 42.120.21.30|208.67.222.222|208.67.220.220|114.114.114.114|
114.114.115.115
------------------------------------------------------

浏览器设置成全局代理,但是在服务器端出现以下错误:

ERROR - [Jun 23 15:15:16] create_http_request "POST https://goagentset2.appspot.
com/2" failed:[Errno 10061] 由于目标计算机积极拒绝,无法连接。
Traceback (most recent call last):
  File "proxy.py", line 1847, in create_http_request
  File "proxy.py", line 2594, in create_ssl_connection
  File "proxy.py", line 2577, in create_tcp_connection
  File "Z:\goagent\goagent-3.1.18\local\python27.zip\gevent\socket.py", line 591
, in create_connection
error: [Errno 10061] 由于目标计算机积极拒绝,无法连接。

INFO - [Jun 23 15:15:16] URLFETCH "GET http://www.baidu.com/" fetchserver='https
://goagentset2.appspot.com/2' error(10061, '\xd3\xc9\xd3\xda\xc4\xbf\xb1\xea\xbc
\xc6\xcb\xe3\xbb\xfa\xbb\xfd\xbc\xab\xbe\xdc\xbe\xf8\xa3\xac\xce\xde\xb7\xa8\xc1
\xac\xbd\xd3\xa1\xa3'), retry...
INFO - [Jun 23 15:15:16] 192.168.1.6:52376 "MOCK GET http://www.baidu.com/ HTTP/
1.1" 502 1509

试了一个晚上没有解决,不知道可否帮忙指点以下

先谢过!

Original issue reported on code.google.com by [email protected] on 23 Jun 2014 at 7:18

界面的tip问题

鼠标放在右上角处,用随机测试,显示的tip写的是 
线程/剩余数 应该是 线程/IP总数吧

Original issue reported on code.google.com by Wong.Syrone on 23 Jun 2014 at 2:38

能不能增加自动删除无效IP 和重复测试功能

首先非常感谢,我现在爬墙的速度真的快了很多

想提几个建议
因为有些ip不是很稳定,不知道是保护机制还是什么的 经常 
这次测试可以 下一次测试又失败了,过一会儿测试又可以

我现在都是 随机测试出 一个很大的IP数目 
然后导入正常测试  重复测试多次 选出 比较稳定的IP 

但是,有个问题比较麻烦 就是 每次 我都得重复:测试 
选中删除无效IP 导出,然后再导入,再测试。
所以,我想问 
能不能增加一个选项,让用户决定要不要过滤无效的ip 
还有正常测试能否支持一下对已经测试完的结果再次测试。��
�我是win8 正常测试 再点一次 就提示无IP列表)

再次表示感谢


Original issue reported on code.google.com by [email protected] on 24 Jun 2014 at 2:02

找到的IP不能结合Goagent访问www.google.com

公司代理可以用你的软件,我用GoGo Tester 
2.2-6找到几个,怎么加到goagent里面的IPLIST,访问www.google.com出
现,404. That’s an error.

The requested URL / was not found on this server. That’s all we know.

但是单个IP明明可以用的 ,为什么,访问不了 
www.google.com呢?

找到的IP放到 goagent的iplist里面吗?

求指点


Original issue reported on code.google.com by [email protected] on 27 Jun 2014 at 9:57

Attachments:

很好用

扫描了100个ip出来,GoAgent就变白了。Good_ipaddres一直维持在80-9
0之间。
感谢作者。
终于可以正常工作了。

Original issue reported on code.google.com by [email protected] on 24 Jun 2014 at 8:38

开始随机测试就停止工作 win7 64系统

描述:
  Stopped working

问题签名:
  问题事件名称:   CLR20r3
  问题签名 01:  gogo tester 2.1-13.exe
  问题签名 02:  2.0.1.6
  问题签名 03:  539eb2d8
  问题签名 04:  System
  问题签名 05:  2.0.0.0
  问题签名 06:  5315aae3
  问题签名 07:  2cb9
  问题签名 08:  67
  问题签名 09:  System.Net.Sockets.Socket
  OS 版本:    6.1.7601.2.1.0.256.1
  区域设置 ID:  2052


Original issue reported on code.google.com by [email protected] on 25 Jun 2014 at 10:44

发生的问题



开启随机测试(5000)ip后显示标准测试有效1000多ip,然后重复的��
�准测试,每次都有几十个ip失效。到测试剩余到400于ip后,全
部失效,感觉好像重复扫描多次被侦测后封掉了ip。希望提出
的问题能助作者有效改善该软件。

Original issue reported on code.google.com by [email protected] on 15 Jun 2014 at 11:38

奇怪的问题

个人可以建立一个谷歌镜像服务器么?

Original issue reported on code.google.com by yuhui4444 on 19 Jun 2014 at 4:20

随机测试的弹出窗口

确认提示的默认操作我觉得应该是“确定”,通常不会误操��
�,也非永久性损失。

确定和取消应该支持回车与Esc键。
Windows平台下应该是左确定,右取消。

默认数量100是不是多了点,我觉得50足够了,或者更少。

Original issue reported on code.google.com by yfdyh000 on 19 Jun 2014 at 2:06

2.1.15 运行,出不来ip地址


半个小时一个都没有出来,是不是和外部网络环境有很大的��
�系,我设置的线程数是100,还是自己的机器问题?

Original issue reported on code.google.com by wswg2009314 on 18 Jun 2014 at 8:15

代理测试所有的都失败

What steps will reproduce the problem?
1. 开始随机测试
2. 开始标准测试
3. 开始代理测试

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
GoGo Tester 2.1-12,win7 X86

Please provide any additional information below.
随机测试和标准测试时代理测试列全部是 
N/A,点代理测试全部显示failed。
程序是放在Goagent.exe同目录的。GAE是最新的3.1.18版本。
请问这是我操作方式不对还是程序BUG?

Original issue reported on code.google.com by [email protected] on 16 Jun 2014 at 3:54

Attachments:

2.1-8怎么不见了?

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.


Original issue reported on code.google.com by [email protected] on 15 Jun 2014 at 6:31

有几个问题想请教作者

1. 使用网上的来的IP进行测试,在_ok 后面还有域名如: _ok 
www.123.com 是否此IP并非googleIP,_ok 后代数字,如_ok 0123
2. 选择googleIP(仅结果显示为_ok)的添加到goagent的[iplist] 
的google_cn 和 
google_hk后,两个都是同样的IP,可以翻阅但是用几分钟后速度还�
��如不改的,连接google出现404
3. 使用代理测试无反应,已经把gogo-tester放在goagent文件夹中.
使用版本2.1.7

ps: GGC IP怎么找,是否找hosts文件就可以,请提示几个关键字

Original issue reported on code.google.com by [email protected] on 17 Jun 2014 at 3:14

使用方法是这样吗?

1.使用随机测试。
2.把标准测试ping值大于150(或别的)数值的ip给移除掉。
3.剩下的ip进行代理测试。
4.剔除掉failed的ip。
5.把剩下的ip列表复制到proxy.ini中的[iplist]

是这样吗?
那如果是这样的话,iplist中的ip是不是越多越好呢?多的话会
影响速度吧?
是不是还需要定期清理失效的ip呢。
谢谢!

很棒的程序!很cool的开发者。


Original issue reported on code.google.com by [email protected] on 15 Jun 2014 at 8:24

改良建议

夭寿罗,我昨晚开着电脑用gogotester扫ip,碰到的问题,希望��
�进的问题如下:
1、102w google ip 
这个ip地址库,我打开记事本得一分钟才显示得完。
2、把这个102万个ip地址放到gogotester里面,得十几分钟电脑才�
��复制进去。怎么会这么久呢?
3、昨晚开了一晚,第二天起床,程序不见了,是自动关闭还�
��什么回事不明!但是一晚的扫描成果会不见了。又要重新开
始?
4、将来扫描出来的合格的ip地址导出格式能不能自动做成goage
nt的格式?如:74.125.21.34|74.125.21.54|74.125.21.123|74.125.20.36|74.125.
20.75|74.125.20.115|74.125.20.40|74.125.20.53|74.125.21.145|……

最好出一教程,教一下我们怎么在goagent里面换ip!真心不懂��
�么换ip啊,goagent好多修改都不会啊,比如什么联接线程啥的�
��教教小白们啊,程序猿同志!

Original issue reported on code.google.com by [email protected] on 15 Jun 2014 at 8:19

IP测试导致路由器断流

不管是随机测试还是标准测试,很多时候都会导致无线路由��
�断流。
10M电信光纤,i5+GT 755M,最大线程50。

Original issue reported on code.google.com by [email protected] on 28 Jun 2014 at 7:18

感谢作者!

自从有了这软件,

感觉心里踏实了,

不用再担心哪天会突然上不了之前一直能上的网站。


那些说软件测试出来的ip会失效的,

我是不晓得怎么回事,因为我用起来觉得相当的好用。

Original issue reported on code.google.com by [email protected] on 21 Jun 2014 at 12:37

贡献最后的亚太区IP段

考虑到以后可能没多少时间和精力花费在GoAgent上,况且GoAgent
又要大重构了,于是乎将我自己的IP库中最后一批尚未公布的
GGC IP提供给gogo-tester,为项目扩充IP资源

这些IP虽然是亚太区的,但质量不怎么样,只能达到可用的程
度,这点要怪就怪电信和联通,不仅为墙添砖加瓦,通往亚��
�的线路更是烂货中的烂货

具体IP段在楼下

Original issue reported on code.google.com by [email protected] on 22 Jun 2014 at 12:30

启动时的消息框的时机

应该在窗口载入后弹出,不然此时没有任务栏按钮,提示框��
�能被其他窗口覆盖,只能在最小化其他窗口后才能找到该窗�
��。

Original issue reported on code.google.com by yfdyh000 on 19 Jun 2014 at 2:01

存在的问题


附件里两个IP地址显示都是fail或invalid
事实上这两个ip都是优质ip。

Original issue reported on code.google.com by [email protected] on 27 Jun 2014 at 2:50

Attachments:

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.