umair-tariq / siphon Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/siphon
Automatically exported from code.google.com/p/siphon
What steps will reproduce the problem?
1. Open Contacts Tab
2. Click The + sign to add a new contact
What is the expected output? What do you see instead?
I am pretty sure it switches to the Contacts.app, or for some reason the
navigation tabs along the bottom are missing.
What version of the product are you using? On what operating system?
Siphon 1.7.9.1, firmware 1.1.4
Please provide any additional information below.
Not much more info than that.
Oh, and why is there always a call icon in the status bar? Could you make
it go away when you exit the application in future versions, or make a
"quit" feature and then it will go away?
Original issue reported on code.google.com by [email protected]
on 21 Jun 2008 at 2:20
What steps will reproduce the problem?
1. Open Siphon
2. GO back to the springboard
3. Receive a call, with daemon mode in operation
What is the expected output? What do you see instead?
Is some kind of signal supposed to pop out when receiving a call and out of
the program. The only time I can actually know someone is calling me, is
when I am in the program. The daemon mode is not of much use if this is the
case.
What version of the product are you using? On what operating system?
1.99 on 1.14
Please provide any additional information below.
Just tell me if this is normal, and if you have a plan to correct this. It
would be useful if a pop-up would open when receiving a call, whereever you
are on your ipod.
Original issue reported on code.google.com by [email protected]
on 25 Jul 2008 at 3:05
Hi,
I am running the latest version of siphon on FW1.1.3. I have configured my
TPAD (VOIP) settings on the siphon-settings menu. But everytime i launch
siphon, it opens up and then automatically closes again. And if i turn on
the log, i am not sure where the log file is stored. Pls advise.
Original issue reported on code.google.com by [email protected]
on 10 Jun 2008 at 6:15
When the micro is activated, the CPU activity increases to 80-100%.
The process that uses CPU is mediaserverd.
Original issue reported on code.google.com by [email protected]
on 3 Apr 2008 at 9:16
What steps will reproduce the problem?
1. Call asterisk extension numbers
2.
3.
What is the expected output? What do you see instead?
Make a phone call using the internal iPhone Mic.
The Mic seems to be on mute.
What version of the product are you using? On what operating system?
1.9.9 on firmware 1.1.3
Original issue reported on code.google.com by [email protected]
on 28 Jul 2008 at 3:58
Some providers require both.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2008 at 3:59
What steps will reproduce the problem?
1. Run Siphon
2. Click on Contacts
3. Choose a contact, click on the number
What is the expected output? What do you see instead?
The chosen number should be called, but it is NOT.
What version of the product are you using? On what operating system?
Alpha release, 2.4.2008
Please provide any additional information below.
contacts: after selecting a contact the phone number it seems is not sent to
the main app?
Original issue reported on code.google.com by [email protected]
on 3 Apr 2008 at 10:44
What steps will reproduce the problem?
1. call out voice in ok voice out broken up
2. call in voice in ok voice out ok but accompanied by rhythmic noise
3.
What is the expected output? What do you see instead?
reasonable clear sound
What version of the product are you using? On what operating system?
1.9.9
Please provide any additional information below.
iPod Touch 16 GB firmware 1.1.4, Touchmods headset
Original issue reported on code.google.com by [email protected]
on 23 Jun 2008 at 10:08
What steps will reproduce the problem?
1. Install Settings (but do NOT fill out anything related to the SIP account)
2. Start Siphon (will ask you to fill out the Settings)
3. Go back to Settings, fill everything correctly
4. Restart Siphon
What is the expected output? What do you see instead?
Siphon should run without a problem, instead, half of the screen is till
overlapped with the
warning screen asking for filling the Settings page out.
What version of the product are you using? On what operating system?
Alpha version from 1.4.2008
Please provide any additional information below.
that "settings scrteenshot" is present on the top halve of the appliation,
below the contacts and dial buttons are active, it seems i can also connect to
sip server,
but the upper halve of the Keypad (and Contacts list) is overlapped with that
white settings
screenshot.
Original issue reported on code.google.com by [email protected]
on 2 Apr 2008 at 8:55
What steps will reproduce the problem?
1. Register SIP client in SIP proxy
2. SIP proxy send SIP-401 Unauthorized including "domain value" in WWW-
Authenticate header
3. SIP client ignore SIP-401 messages
What is the expected output? What do you see instead?
Client should challange authentication and implement SIP registration
What version of the product are you using? On what operating system?
1.2 with iphone Os 1.1.3
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Apr 2008 at 8:11
Attachments:
What steps will reproduce the problem?
1. first call a local landline (tested in Austria)
2. go to Contacts inside Siphon and try to "call" an email address by
simply choosing it from contacts.
What is the expected output? What do you see instead?
siphon calls the last called number, and meanwhile opens the mail app.
it should NOT call anything.
What version of the product are you using? On what operating system?
- just tested it with Siphon v.1.94 on a 114 iPhone:
Please provide any additional information below.
-
Original issue reported on code.google.com by [email protected]
on 14 Jun 2008 at 9:49
What steps will reproduce the problem?
1. Launch Siphon 1.9.7, and AddressBook empty
2. Receive a call
3. Siphon Crash
Siphon crahes immediately after pressing the "call" button if there is
no entry in the the AddressBook for the dialed number!!!
Thanks to Ruediger
Original issue reported on code.google.com by [email protected]
on 9 Jun 2008 at 6:55
I downloaded code for siphone . but i am facing problem how to compile the
code . What settings is required for the compile the code . Anyone knows
please help me out .
Original issue reported on code.google.com by [email protected]
on 18 Jul 2008 at 2:29
What steps will reproduce the problem?
1. Tap the contacts tab
2. Try to select the last contact on the list
3.
What is the expected output? What do you see instead?
expect to be able to select the contact, instead the contact is covered by tabs
What version of the product are you using? On what operating system?
iPod touch 8gb running JB 1.1.4
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 16 Jun 2008 at 6:49
What steps will reproduce the problem?
1. No Steps needed
What is the expected output? What do you see instead?
This is more a change request for beeing able to configure username and
authoization name different.
Example:
Username is user part of SIP URI: oetzi5678
Auth.name is used in SIP header Authorization: oetzi8765
What version of the product are you using? On what operating system?
iphone 1.1.4
Please provide any additional information below.
Example REGISTER with Username different Authorization name:
REGISTER sip:registrar.sip.com SIP/2.0
Via: SIP/2.0/UDP 192.0.2.4:5060;branch=z9hG4bKnashds7
Max-Forwards: 70
To: Bob <sip:[email protected]>
From: Bob <sip:[email protected]>;tag=456248
Call-ID: 843817637684230@998sdasdh09
CSeq: 1826 REGISTER
Contact: <sip:[email protected]>
Authorization: Digest
username="oetzi8765",realm="sip.com",nonce="dcd98b7102dd2f0e8b11d0f600bfb0c
093",uri="sip:[email protected]",qop=auth,nc=00000001,cnonce="0a4f113b",resp
onse="6629fae49393a05397450978507c4ef1",opaque="5ccc069c403ebaf9f0171e9517f
40e41"
Expires: 3600
Content-Length: 0
Thanks in advance
oetzi5678
Original issue reported on code.google.com by [email protected]
on 4 Jul 2008 at 9:19
Siphon v1.2 doesn´t get calls-in. I tried with freedigits and nothing
happened. If you can help me with this contact me to
[email protected]
regards,
Tadeo Klappenbach
Original issue reported on code.google.com by [email protected]
on 1 Jun 2008 at 1:55
What steps will reproduce the problem?
1. Setup to login to Gizmo SIP account
Username: <sip_number>
Password: <password>
Proxy: proxy01.sipphone.com:5060
Domain: proxy01.sipphone.com
STUN: stun01.sipphone.com:3478
2. Setup GrandCentral to forward to Gizmo SIP #
3. Answer PhoneCall
What is the expected output? What do you see instead?
When GrandCentral connects the call, it plays a message, asking you to
press 1 to connect, 2 to send to voicemail, etc. When I press those
numbers on my iPhone, it doesn't recognize them. This works on a
GrandStream 2000 SIP Phone that I have, same configuration, I believe it's
just a difference in the way it handles DTMF, my GrandStream is set to send
DTMF via RTP (RFC2833).
What version of the product are you using? On what operating system?
1.9.4 from free.fr repo. iPhone 1.1.4
Original issue reported on code.google.com by [email protected]
on 4 Jun 2008 at 7:57
What steps will reproduce the problem?
1. Configure Siphon settings for use with a Gizmo5 account
2. Open Siphon
3. Attempt to make a call
What is the expected output? What do you see instead?
The number should begin dialing, instead the number disappears from the display
and nothing
else happens
What version of the product are you using? On what operating system?
1.9.9 on iPod Touch 1.1.4 JB
Please provide any additional information below.
Currently, the only solution to the problem is to open mobile safari and
navigate to the Gizmo
proxy: proxy01.sipphone.com. After that, calls work on that Wi-Fi network, but
if you go to a
new Wi-Fi network, in which case you have to do the same thing. This may have
already been
posted, but this has been a consistent inconvenience for me personally.
Original issue reported on code.google.com by [email protected]
on 24 Jun 2008 at 4:40
What steps will reproduce the problem?
1. After Instal of Siphone over installer I have the Preverences of iPod
Touch on my iphone
2. It doesn´t help to uninstall Siphone.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
the newest of yesterday
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Jun 2008 at 9:07
What steps will reproduce the problem?
1. Send a REGISTER to a Sip Server
2. Receive a 401 Response from Sip Server with modified "sent-by" parameter
on the header field
3. Siphon does not send REGISTER with Authentication
What is the expected output? What do you see instead?
Siphon is discarding this message and outputs:
09:25:09.588 sip_endpoint.c Processing incoming message: Response msg
401/REGISTER/cseq=57128 (rdata0x83d264)
09:25:09.589 sip_endpoint.c Dropping response Response msg
401/REGISTER/cseq=57128 (rdata0x83d264) from 213.5.43.134:5060 because
sent-by is mismatch
It should send another REGISTER with Authentication.
What version of the product are you using? On what operating system?
Siphone 1.9.9
Please provide any additional information below.
This is probably related to http://trac.pjsip.org/repos/ticket/352. The sip
service provider is sip.i-call.gr in Greece. I cannot register my username
with the server due to this.
The following is showing the different Via header on the 401 received (when
running kphone - kde's sip client)
--------------------------------
REGISTER sip:i-call.gr SIP/2.0
Via: SIP/2.0/UDP 192.168.1.20;branch=z9hG4bK43C71C60
CSeq: 1797 REGISTER
...
...
SipClient: Received: 10:48:25.054
---------------------------------
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.1.20:58631;branch=z9hG4bK43C71C60;rport=58630
CSeq: 1797 REGISTER
...
...
Server: Altec Telecoms SIP Proxy
Content-Length: 0
Original issue reported on code.google.com by [email protected]
on 25 Jun 2008 at 7:49
What steps will reproduce the problem?
1. Update to Siphon 1.2
2. Go to Settings, and configure to register with a Asterisk PBX
What is the expected output? What do you see instead?
I expected registration to succeed, but it doesn't :-) The attached
capture shows that Siphon successfully replied to the 401 Asterisk sent,
and received a 200 OK.
What version of the product are you using? On what operating system?
Siphon 1.2 on a iPhone with firmware 1.1.4
Asterisk 1.2.26 on Linux
Please provide any additional information below.
See the attached capture file. The 200 OK is packet #10. Does Siphon
expect any header to be set to something else ?
Original issue reported on code.google.com by [email protected]
on 4 Mar 2008 at 4:35
Attachments:
What steps will reproduce the problem?
1. Install last Siphon build
2. Configure Asterisk sip.conf (normal way, no special parameter, work fine
with other SIP/GSM phones) and configure Siphon "panel"
3. Launch Siphon, wait 10sec and see Siphon crash and iphone return to
SpringBoard
What is the expected output? What do you see instead?
Having Siphon Dial interface
What version of the product are you using? On what operating system?
Siphon.app.20080519.zip
Please provide any additional information below.
Asterisk work perfectly fine with other Wifi/GSM phones !!
Original issue reported on code.google.com by [email protected]
on 20 May 2008 at 3:11
Attachments:
What steps will reproduce the problem?
1. when you make or receive a call, the sound of callee is weak. It's not
important in a building but in the street you don't hear anything.
What is the expected output? What do you see instead?
I'd like it's possible to increase the sound level with iphone button or
slider for ipod (double click on home button)
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 2 Apr 2008 at 8:08
What steps will reproduce the problem?
Not available yet
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
iPhone 3G; OS:2.0
Please provide any additional information below.
When is Siphon available for the new iPhone 3G? I really want to get it
running on my phone.
Original issue reported on code.google.com by [email protected]
on 30 Jul 2008 at 11:00
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.