ubx / xcsoar_scripts

Scripts for the Tools Menu in Kobo Libra 2 (and may be for other Kobo with Bluetooth).

XCSoar scripts for Kobo Libra 2 and Clara 2E

Scripts for the Tools Menu for the Libra 2 and Clara 2E (and may be for other Kobo with Bluetooth).

Copy the directory kobo to the Kobo directory /mnt/onboard/XCSoarData/

NOTE on pairing Bluetooth device

Pairing Bluetooth device must be done once manually, see Bluetoothctl: Management of Bluetooth Devices in Linux

kobo/scripts/

Contains scripts for Bluetooth connection, USB Serial connection and debugging aids.

kobo/scripts/sub/

Contains subprogram used by the scrips in the parent directory. Also, a way to 'hide' in the Tools Menu.

kobo/scripts/init.sh

Called by Kobo Menu launch. Here used to turn off the Kobo front (blinking) LED. And to start usr/set_brightness.sh if it exists (see below).

usr/set_brightness.sh

For Kobo Libra 2. With the 2 buttons Up and Down, you can increase or decrease the screen brightness.
Copy usr/set_brightness.sh to the Kobo directory /usr/

xcsoar_scripts's Issues

CLARA 2E - No bluetooth connection

Thanks for the scripts !

I modified connect-gns-2000 with the ethernet address of my ble device (softrf).
I launch this script prior to launch xcsoar.
In config , I can see rfcom0 but there is no data...

Hope that I use the correct procedure.
Maybe there is an issue with the channel number ?
Any suggestion to debug ?