This document covers the procedure for configurating a system to use gpg smartcards for ssh authentication. The benefit is a good model for two-factor authentication, something you have and something you know. In this example, there is a token and a passphrase.
The Gemalto USB Shell Token V2 and the OpenPGP SmartCard V2 are used here, though there are many combinations that will work.
Examples below are using a Fedora 17 x86_64 fresh install, there are other tutorials for other operating systems available online. See the CREDITS section below for alternate tutorials, examples, etc.
To configure authentication using the previously generated GnuPG key, the GNOME-Shell needs some adjustements. With help from several resources, configure the system to allow gpg-agent to take over ssh authentication.
Certain software must be installed, including gnupg2 (which is probably already installed), gnupg2-smime and pcsc-lite:
# yum install gnupg2-smime pcsc-lite .. snip .. Complete!
Turn off ssh-agent inside gnome-keyring-daemon:
$ gconftool-2 --type bool --set /apps/gnome-keyring/daemon-components/ssh false
Configure gpg to use agent (only for smartcard):
$ gpg --list-keys | head -n 1 $ echo "use-agent" >> ~/.gnupg/gpg.conf
Enable ssh-agent drop in replacement support for gpg-agent:
$ echo "enable-ssh-support" >> ~/.gnupg/gpg-agent.conf
A rather tricky part of this configuration is to have a simple wrapper script, called gpg-agent-wrapper. This script is used with thanks from Diego E. Pettenò:
$ cat ~/.gnupg/gpg-agent-wrapper # Copyright (c) 2010 Diego E. Pettenò <[email protected]> # Available under CC-BY license (Attribution) if ! [ -f "${HOME}/.gpg-agent-info" ] || ! pgrep -u ${USER} gpg-agent >/dev/null; then gpg-agent --daemon --enable-ssh-support --scdaemon-program /usr/libexec/scdaemon --use-standard-socket --log-file ~/.gnupg/gpg-agent.log --write-env-file fi # for ssh-agent forwarding, override gnome-keyring though! if [ -n ${SSH_AUTH_SOCK} ] && \ [ ${SSH_AUTH_SOCK#/tmp/keyring-} = ${SSH_AUTH_SOCK} ]; then fwd_SSH_AUTH_SOCK=${SSH_AUTH_SOCK} fi export SSH_AUTH_SOCK if [ "${fwd_SSH_AUTH_SOCK}" != "" ]; then SSH_AUTH_SOCK=${fwd_SSH_AUTH_SOCK} export SSH_AUTH_SOCK fi source ${HOME}/.gpg-agent-info export GPG_AGENT_INFO export SSH_AGENT_PID GPG_TTY=$(tty) export GPG_TTY
NOTE: The above code has been altered to allow the .gpg-agent-info to run after SSH_AUTH_SOCK. Please see the CREDITS section below for details.
The above gpg-agent-wrapper script is invoked using X and bash (or favorite shell). Please ensure the following files exist as below.
The X session:
$ cat /etc/X11/xinit/xinitrc.d/01-xsession
[ -f ${HOME}/.xsession ] && source ${HOME}/.xsession
$ ls -l /etc/X11/xinit/xinitrc.d/01-xsession
-rwxr-xr-x. 1 root root 53 Nov 23 10:54 /etc/X11/xinit/xinitrc.d/01-xsession
$ cat ~/.xsession
source ${HOME}/.gnupg/gpg-agent-wrapper
The shell rc file:
$ cat ~/.bashrc
# .bashrc
# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
..snip..
# ssh authentication component
source ${HOME}/.gnupg/gpg-agent-wrapper
..snip..
Reboot the machine works the best.
Included with the gemalto token and GnuPG Smartcard version 2 should be a document describing the default PIN values. There is a regular PIN, which is used to unlock the token for Signing, Encryption or Authentication. Additionally, there is an Admin PIN, which is used to reset the PIN and/or the Reset Code for the key itself.
$ gpg --card-edit ..snip.. gpg/card> admin Admin commands are allowed gpg/card> passwd gpg: OpenPGP card no. D27600012401020000050000158A0000 detected 1 - change PIN 2 - unblock PIN 3 - change Admin PIN 4 - set the Reset Code Q - quit Your selection? 3
Enter the Current Admin PIN
Then enter the New Admin PIN twice
1 - change PIN 2 - unblock PIN 3 - change Admin PIN 4 - set the Reset Code Q - quit Your selection? 1
Enter the Current PIN
Then enter the New PIN twice
NOTE: If the Admin PIN has not been entered, it may be required before changes are applied.
There are several ways to generate an SSH Key using GnuPG. A common way is to link the new Authentication key to an already existing key:
$ gpg --edit-key 8A8F1D53
gpg (GnuPG) 1.4.12; Copyright (C) 2012 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Secret key is available.
pub 3072R/8A8F1D53 created: 2012-10-06 expires: never usage: SC
trust: ultimate validity: ultimate
sub 3072R/2F15E06B created: 2012-11-23 expires: 2022-11-21 usage: S
sub 3072R/EB8B4EBD created: 2012-11-24 expires: 2022-11-22 usage: E
sub 3072R/6BB325E9 created: 2012-11-24 expires: 2022-11-22 usage: A
[ultimate] (1). Clint Savage <[email protected]>
[ultimate] (2) Clint Savage <[email protected]>
[ultimate] (3) Clint Savage <[email protected]>
gpg>
Once in the edit-key dialog, create a key on the card:
gpg> addcardkey Signature key ....: 91BC 60CC B9EC 8E73 923A FC6D 58CD 88A6 2F15 E06B Encryption key....: 0CC3 DC3E 0D17 6111 A62B F656 63C6 4DA9 EB8B 4EBD Authentication key: 9EBF A9FE 8AE1 0FEB 1699 CE9A 779F 43D5 EC6F CC13 Please select the type of key to generate: (1) Signature key (2) Encryption key (3) Authentication key Your selection? 3 gpg: WARNING: such a key has already been stored on the card! Replace existing key? (y/N) y What keysize do you want for the Authentication key? (3072) Key is protected. You need a passphrase to unlock the secret key for user: "Clint Savage <[email protected]>" 3072-bit RSA key, ID 8A8F1D53, created 2012-10-06 Please specify how long the key should be valid. 0 = key does not expire <n> = key expires in n days <n>w = key expires in n weeks <n>m = key expires in n months <n>y = key expires in n years Key is valid for? (0) 10y Key expires at Mon 21 Nov 2022 05:29:00 PM MST Is this correct? (y/N) y Really create? (y/N) y gpg: Note that the key does not use the suggested creation date pub 3072R/8A8F1D53 created: 2012-10-06 expires: never usage: SC trust: ultimate validity: ultimate sub 3072R/2F15E06B created: 2012-11-23 expires: 2022-11-21 usage: S sub 3072R/EB8B4EBD created: 2012-11-24 expires: 2022-11-22 usage: E sub 3072R/6BB325E9 created: 2012-11-24 expires: 2022-11-22 usage: A [ultimate] (1). Clint Savage <[email protected]> [ultimate] (2) Clint Savage <[email protected]> [ultimate] (3) Clint Savage <[email protected]>
Upon completion of the key, be sure to save the record to the card and gpg key:
gpg> save $
Assuming everything above is configured correctly, a simple test is performed with the SmartCard inserted:
$ ssh-add -L ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQDL/XmU......BL0luE= cardno:00050000158A
In some cases, it's going to be useful to rest the SmartCard. It can be done interactively:
$ gpg-connect-agent > /hex > scd serialno S SERIALNO D276000124...........00016E00000 0 OK > scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40 D[0000] 69 83 i. OK > scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 D[0000] 69 82 i. OK > scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40 D[0000] 69 83 i. OK > scd apdu 00 e6 00 00 D[0000] 90 00 .. OK > scd apdu 00 44 00 00 D[0000] 90 00 .. OK > /echo card has been reset to factory defaults card has been reset to factory defaults > /bye
NOTE: If desired, this file can be stored them in a file and run with "gpg-connect-agent < FILE".
The github repository contains all the files to make the changes above. Please feel free to read through them.
A special thanks to the following people and/or links.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent