trouch / creawsomemod Goto Github PK

This has been a discussion in the past in the community and there seems to be two camps :)

The Cura provided Ender-3 profile defines the bed size as 235x235 mm, however this package defines it as 220x220 mm. I am aware that 220 is the official size (as defined by Creality), however a lot of people in the community 'pushed' to have the size set to 235x235 as that is what in reality can be used.

Just wondering why 220x220 was chose in this package.

Cheers! Sacha

Hi,

I really want to try your mod, I installed them on Cura 4.1.0 but since when I clic on Slice, the progress bar never go up....

I reinstalled Cura 4.1.0 (without erasing settings, and without the mod it's work again

When I click on the nozzle tab in the Cura 4.0 modded software, under the Nozzle size tab it says empty and no matter how many times I click, it won't allow me to choose a nozzle size. Has anyone else encountered this problem? If so, please give me a solution. I would be very grateful.

ransomware detected !!! Grrr
CURA was quarantined

I saw some people asked about this elsewhere and I would like to suggest too to use a "classic" prime lines: two long line on the left side of the plate.

I did everything it said, I renamed the file "resources_old" and copy and pasted the new one in. Rebooted Cura and no change what so ever. What am I doing wrong???

Hello,

Is there a way to install just the printing profile without the other modifications to Cura?

Thanks

it says "cura can't start"

I followed the instructions for Mac OS X and Cura will not start with the modified resources folder, it immediately crashes and I have to go back to the old resources folder for it to launch again.

The Beta-3 package contains a lot of files that are a copy of the original Cura installation resources folder (for example, firmware hex files). Is it necessary to include all of these files in this package?

Wouldn't it be sufficient only to package those files that are covered by this mod?

Cheers! Sacha

In the same maner that temperature, retracts parameters, flow'd be managed in the material profile.
If possible add the flow parameter in the material's profile.

Fresh install of Cura, set up the mod just fine, and set CR-10S as my printer. However, none of the quality profiles are showing up. Is this an error or have they not been set up yet?

When trying to run after loading resources folder, a long string of crash reports populate, but I am unable to read them. They seem to multiply until the program closes prematurely.

I replaced (added the new) resource folder and restarted cura 4.0 but it crashes. Any suggestions to correct. When I return the old (original) resource folder, cura 4.0 starts up.

I'm not deeply familiar with Linux packaging systems. Cura is supplied as an AppImage. I cannot edit it directly. But I can extract the contents of the image into a folder, replace resource folder and make AppImage with https://github.com/AppImage/AppImageKit
But after I create a modified AppImage file it won't run cura. It just does nothing. No error or anything.
Any ideas what else I can try to mod cura for linux?

When i create a new material by duplicate generics, i have no quality settings in profiles.

To the creators of this mod.

I know you have added an option for 0.8mm nozzles, but could you add more options for the different layer heights instead of just 0.32?

Thanks

After trying it and realizing I can't use my own nozzle sizes (only the preset sizes) I wanted to go back to my existing setup.

I returned my resources folder to the app directory and restarted.

Now my machine definitions are corrupt and I had to reset my entire installation back to factory defaults. Not bloody happy. Lost all my machines, materials, settings, preferences, add-ins.

Thankfully some of that gets brought back when you import a .3mf project. But not all.

I think you need to provide much better technique for backing up ALL of someone's installation and how to restore it all back before asking someone to try your stuff.

Installed creawsome on the ender 3 pro prints fantastic no changes needed. Tried same print on my cr 10s pro really bad stringing am I missing something. Any help would be fantastic

As object, how can i configure a 0.3mm nozzle?
I can see only
0.2
0.4
0.6
0.8

Hello, I have a problem when slicing with your mod. As you can see in the pictures attached, in the prepare mode is all good, but when you change to the preview mode I cannot see the small details. Can you tell me how to solve this issue? Thanks

I can only see 0.2, 0.4, 0.6 and 0.8 nozzle sizes in this mod. How to change to other sizes, like 0.1, 0.3, 0.5, 1?

Salut,
je t'ai fait un boot logo un peu plus classe avec transparence si ça t'intéresse.

I notice when turning on adhesion that the brim is printing from the inside out instead of from the outer perimeter in.
Your brims will be much more effective if they print from the outside in. The outer part of the skirt has the gentlest curves and covers the longest distance so it has the best chance of adhering to the print surface. Also, if there happen to be any globs on the print head or any uneven flow in the hot-end, you would much rather have those problems sorting themselves out on the outside of the skirt than on the inside where your model will be.

Hello:)
Thanks for the mod! I installed it and printed a filament swatch on my ender 3 pro (cura 4.0).
after the print was done I realized that the numbers were not completely printed.
I looked up the preview and it is the same there. I attach some pictures of the issue along with the *.stl.
The first is the STL File, the second is the sliced file and the third is the sliced file + the option "print thin walls" activated. I don't know if this is a bug of the mod or if this is something that could be fixed in the settings but I can`t find the error. loading the default profile and slicing it doesn't show this problem. Some help would be really nice.
Thanks a lot.

Best Tommy

STL File - Eryone_Schwarz_PLA.zip

Thanks for starting this project, it's great to see a community effort to produce top-notch profiles for Creality printers.

First of all, download the CreawsomeMod package then follow instructions according to your operating system. DO NOT DOWNLOAD THE ZIP FILE FROM THE CLONE BUTTON.

Where do the files inside the zip come from, shouldn't they be in the GitHub repository so that one can see who changed/added/removed what, and so that one can contribute?

Also, I would imagine that by far not all of those files in the zip have actually been changed. Which ones have?

Is this code be supposed to be a mod (almost forked application) in the long run, or should the Creality profiles be contributed back to the original Cura project eventually?

especially nice for when protyping....

Eben though bed size machine settings are the same, maximum part size is reduced to 98.9% of the previous maximum.

i need to change my retraction speed to 70 mm/s but unable to. how to fix?

Ender 5 is not on the list. I will try ender 3 settings, but would love to see Ender 5 on printer list.

Hi,

Awesome project! Do you think is there a way to support Linux as well? I believe Cura is shipped for Linux as a single AppImage file, so that probably make things harder.

Are you planning to release it as a regular Cura plugin maybe?

Thanks.

Because the mod renames some things on the backend, you can no longer import profiles. It would be nice to be able to import some of these common ones.

I did all just how it says to do.
After I start cura, it just crash and nothing helps.

Hello,

Cura 4.1 doesn't start when I put the resources folder in place and rename the original one. This is the error traceback info:

Traceback (most recent call last):
File "", line 969, in _find_and_load
File "", line 958, in _find_and_load_unlocked
File "", line 664, in _load_unlocked
File "", line 634, in _load_backward_compatible
File "/Users/ultimaker/build/env/4.1/inst/lib/python3.5/site-packages/cx_Freeze/initscripts/startup.py", line 12, in
File "", line 969, in _find_and_load
File "", line 958, in _find_and_load_unlocked
File "", line 664, in _load_unlocked
File "", line 634, in _load_backward_compatible
File "/Users/ultimaker/build/env/4.1/inst/lib/python3.5/site-packages/cx_Freeze/initscripts/Console.py", line 21, in
File "", line 969, in _find_and_load
File "", line 958, in _find_and_load_unlocked
File "", line 664, in _load_unlocked
File "", line 634, in _load_backward_compatible
File "/Users/ultimaker/build/4.1/build/inst/bin/cura_app.py", line 136, in
File "/Users/ultimaker/build/4.1/build/inst/lib/python3.5/site-packages/cura/CuraApplication.py", line 771, in run
File "/Users/ultimaker/build/4.1/build/inst/lib/python3.5/site-packages/cura/UI/WelcomePagesModel.py", line 211, in initialize
File "/Users/ultimaker/build/4.1/build/inst/lib/python3.5/site-packages/cura/UI/WelcomePagesModel.py", line 235, in _initialize
File "/Users/ultimaker/build/4.1/build/inst/lib/python3.5/site-packages/cura/UI/WelcomePagesModel.py", line 202, in _getBuiltinWelcomePagePath
File "/Users/ultimaker/build/4.1/build/inst/lib/python3.5/site-packages/UM/Resources.py", line 85, in getPath
FileNotFoundError: Could not find resource ('WelcomePages/WelcomeContent.qml',) in 129

Hi,

I see that the mod was updated to Beta 0.3 and I was wondering what the changes were between 0.2 and 0.3 versions?

Thanks,

Hello, is it possible to add the cr-20 Pro profile, please?
creality_cr20pro.def.zip

As seen in the attached picture, I cannot get access to the marketplace plugins.

I downloaded the newer 0.2 version that shows ender 3 support, but it's not showing up for me.

#bug I have an Ender 3. When I print an object, the nozzle passes over the object at regular intervals, extruding filament. can someone help me further

I wish to try your mod but I see the biggest Nozzle is 0.8mm. I am using a 1.2mm
Can you add this?

This is an assumed typo. Feel free to suggest new name here !

Could you add the Cr-10 Mini?

does this work with modified firmware like klipper?

https://github.com/KevinOConnor/klipper

Hi! Thanks very much for sharing your work on this.
I'm still tuning settings but noticed one thing that puzzled me - the profile for a CR10s specifies the bed width and height of 310mm (in resources\definitions\creality_cr10.def.json). Shouldn't this be 300mm x 300mm?

CR-X not supported?

Are you willing to add Creality CR-X?

Hi,
How can I set up my Ender 3?
Do I've just to change the bed size of the CR-10?

I just downloaded this mod from the correct location in the text, not the Clone button. I got it all spun up, and went to load my printer's profile, but it isn't there. Any ideas?

When I start my print the skirt is not the first item to be printed

I use an Ender 2. Is it possible to get Ender 2 support?

Thank you for your nice work!!

Regards

elpoka

Is there a specific reason that these profiles cannot be merged directly into Cura? If these do get merged into Cura, no manual action is needed to get these profiles (and it would also mean that we don't get any startup crashes anymore)