tperale / sx128x

📡 Radio driver for the Semtech SX128X LoRa 2.4GHz for contiki-ng

SX128X LoRa transceiver driver for contiki-ng OS

This driver was developped as a means of studying the effectiveness of the TSCH protocol in conjunction with LoRa.

How to use

Clone this repository with the contiki-ng submodule.

git clone --recursive [email protected]:tperale/sx128x.git

There is an exemple of how to use this driver in /exemple/ folder in this repository. You can see you need to declare the driver in your Makefile by adding the following line.

MODULES += $(CONTIKI_NG_DRIVERS_DIR)/sx128x/src

Also be sure to declare the radio driver as your NETSTACK radio driver in the project-conf.h file.

#define NETSTACK_CONF_RADIO sx128x_radio_driver

sx128x's Issues

Module not responding to commands

Hi
The module does not seem to be responding to the SPI commands. I remember this being fixed last year, but it seems not to be pushed to the master branch.

As I had no other way of contacting you I've opened this issue.