Topic: curiosity-nano-attiny3217 Goto Github

👇 Here are 3 public repositories matching this topic...

khoih-prog / attiny_pwm
curiosity-nano-attiny3217,This library enables you to use Hardware-based PWM channels on Arduino AVR ATtiny-based boards (ATtiny3217, etc.), using megaTinyCore, to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms
User: khoih-prog
channel duty-cycle hardware-based-pwm mission-critical multi-channel-pwm on-the-fly pwm pwm-driver pwm-frequency timer

khoih-prog / attiny_slow_pwm
curiosity-nano-attiny3217,This library enables you to use ISR-based PWM channels on Arduino AVR ATtiny-based boards (ATtiny3217, etc.), using megaTinyCore, to create and output PWM any GPIO pin. It now supports 64 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision. Now you can change the PWM settings on-the-fly
User: khoih-prog
attiny duty-cycle hardware-timer isr pwm pwm-frequency timer-interrupt megaav isr-based isr-based-pmw

khoih-prog / attiny_timerinterrupt
curiosity-nano-attiny3217,This library enables you to use Interrupt from Hardware Timers on Arduino AVR ATtiny-based boards (ATtiny3217, etc.) using megaTinyCore. These ATtiny Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That is mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers interval is very long (ulong millisecs). The most important feature is they are ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks
User: khoih-prog
accuracy attiny attiny3217 curiosity-nano-board hardware-timers isr megaavr mission-critical non-blocking timer