tkxkd0159 / ibc-demo

IBC transfer, ica demo

HackAtom Seoul: Get Started with IBC

Disclaimer

The following repository and x/inter-tx module serves as an example and is used to exercise the functionality of Interchain Accounts end-to-end for development purposes only. This module SHOULD NOT be used in production systems and developers building on Interchain Accounts are encouraged to design their own authentication modules which fit their use case. Developers integrating Interchain Accounts may choose to firstly enable host chain functionality, and add authentication modules later as desired. Documentation regarding authentication modules can be found in the IBC Developer Documentation.

Overview

This workshop, created for the HackAtom in Seoul (July 29-31 2022), gives an introduction to IBC and some IBC applications. We will take a look at ICS20 (fungible token transfer) and ICS27 (Interchain Accounts).

The repository contains a basic example of an Interchain Accounts authentication module and serves as a developer guide for teams that wish to use interchain accounts functionality.

The Interchain Accounts module is now maintained within the ibc-go repository here. Interchain Accounts is now available in the v3.0.0 release of ibc-go.

Developer Documentation

IBC developer docs can be found on the IBC documentation website.

• ICS20 - token transfer
• ICS27 - interchain accounts

Setup

1. Clone this repository and build the application binary

git clone https://github.com/tmsdkeys/hackatom-seoul-ws.git
cd hackatom-seoul-ws

make install 

2. Download and install IBC relayer software, hermes and rly:

• hermes

cargo install --version 0.14.1 ibc-relayer-cli --bin hermes --locked

• golang relayer

$ git clone https://github.com/cosmos/relayer.git
$ git checkout v2.0.0-rc3
$ cd relayer && make install

Alternatively, you can go to the Github Releases for hermes and rly. Download the appropriate archive file for your operating system and install the binary.

Check if the installation was succesful:

$ hermes version
$ rly version

3. Bootstrap two chains and start them (in the background):

$ make init

Check the network/init.sh script to see the intialization parameters.

This is the situation before make init. The blockchains are not live yet.

4. Initialize the relayers (configs and registering keys) for both hermes and rly.

# Configuration for `hermes` happens in a `config.toml` file, we register keys by:
make init-hermes-rly

# Configuration for `rly` happens via the CLI. We also register keys for the relayer accounts.
make init-golang-rly

⚠️ We will be making use of both relayer softwares in the workshop, but please note that interchain accounts support is not yet present in rly v2.0.0-rc3 but will be added in a future release candidate.

5. The next step is to create a connection between the hackatom and seoul chains, as well as a channel for ics20 transfers.

# Create connection and ICS20 channel with `hermes`
make setup-hermes-rly

# Create connection and ICS20 channel with `rly``
make setup-golang-rly

Fungible Token Transfer

NOTE: For the purposes of this demo the setup scripts have been provided with a set of hardcoded mnemonics that generate deterministic wallet addresses used below.

# Store the following account addresses within the current shell env
export DEMOWALLET_1=$(icad keys show demowallet1 -a --keyring-backend test --home ./data/hackatom) && echo $DEMOWALLET_1;
export DEMOWALLET_2=$(icad keys show demowallet2 -a --keyring-backend test --home ./data/seoul) && echo $DEMOWALLET_2;

When we have setup the client, connection and ics20 (transfer) channel, we can send token across chains. We will send some tokens from the seoul chain to the hackatom chain.

# Send some stake tokens from seoul to hackatom, using demowallets on respective chains.
icad tx ibc-transfer transfer transfer channel-0 $DEMOWALLET_1 11000stake --from $DEMOWALLET_2 --chain-id seoul --home ./data/seoul --node tcp://localhost:26657 --keyring-backend test -y

When we check the resulting balance, we get the following:

# Query for the balance of the demowallet on chain hackatom
icad q bank balances $DEMOWALLET_1  --chain-id hackatom --node tcp://localhost:16657

# Result of the balance query
balances:
- amount: "11000"
  denom: ibc/C053D637CCA2A2BA030E2C5EE1B28A16F71CCB0E45E8BE52766DC1B241B77878
- amount: "100000000000"
  denom: stake

⚠️ Pay attention to the IBC denom: ibc/C053D637CCA2A2BA030E2C5EE1B28A16F71CCB0E45E8BE52766DC1B241B77878. It is a hash of the path information prepended by ibc/.

The path information can be found from the hash by the denom_trace command:

$ icad q ibc-transfer denom-trace C053D637CCA2A2BA030E2C5EE1B28A16F71CCB0E45E8BE52766DC1B241B77878 --chain-id hackatom --node tcp://localhost:16657

# Results in...
denom_trace:
  base_denom: stake
  path: transfer/channel-0

Interchain Accounts

We created the setup in an earlier section. Let's take a look at a situation sketch before we start with the ICA workflow.

This is the situation after make init and creating a connection. The diagram focuses on ICA, so the ICS20 channel is not shown. The chain binary's have been built and started, and an IBC connection between controller and host chains has been set up.

❗From now on we will switch over to the hermes relayer to use Interchain accounts functionality.

make start-hermes-rly

Registering an Interchain Account via IBC

Register an Interchain Account using the intertx register command. Here the message signer is used as the account owner.

# Register an interchain account on behalf of DEMOWALLET_1 where chain test-2 is the interchain accounts host
icad tx intertx register --from $DEMOWALLET_1 --connection-id connection-0 --chain-id hackatom --home ./data/hackatom --node tcp://localhost:16657 --keyring-backend test -y

# Query the address of the interchain account
icad query intertx interchainaccounts connection-0 $DEMOWALLET_1 --home ./data/hackatom --node tcp://localhost:16657

# Store the interchain account address by parsing the query result: cosmos1hd0f4u7zgptymmrn55h3hy20jv2u0ctdpq23cpe8m9pas8kzd87smtf8al
export ICA_ADDR=$(icad query intertx interchainaccounts connection-0 $DEMOWALLET_1 --home ./data/hackatom --node tcp://localhost:16657 -o json | jq -r '.interchain_account_address') && echo $ICA_ADDR

This is the situation after registering the ICA. A channel has been created and an ICA has been registered on the host.

Funding the Interchain Account wallet

As we've only just created the Interchain account, it has no funds yet. To submit transactions on the host chain, it will need some funds.

# Query the interchain account balance on the host chain. It should be empty.
icad q bank balances $ICA_ADDR --chain-id seoul --node tcp://localhost:26657

We can allocate funds to the new Interchain Account wallet by using the bank send command from an account on the seoul chain or from the IBC vouchers we sent earlier to the hackatom chain.

• Bank send on host chain

# Send funds to the interchain account.
icad tx bank send $DEMOWALLET_2 $ICA_ADDR 10000stake --chain-id seoul --home ./data/seoul --node tcp://localhost:26657 --keyring-backend test -y

# Query the balance once again and observe the changes
icad q bank balances $ICA_ADDR --chain-id seoul --node tcp://localhost:26657

• ICS20 transfer from controller chain

# Send funds through interchain token transfer from the demowallet account on `hackatom` chain
icad tx ibc-transfer transfer transfer channel-0 $ICA_ADDR 9000ibc/C053D637CCA2A2BA030E2C5EE1B28A16F71CCB0E45E8BE52766DC1B241B77878 --from $DEMOWALLET_1 --chain-id hackatom --home ./data/hackatom --node tcp://localhost:16657 --keyring-backend test -y

# Query the balance once again and observe the changes
icad q bank balances $ICA_ADDR --chain-id seoul --node tcp://localhost:26657

❗ Check if the balance shown is the native stake token.

This is the situation after funding the ICA.

Sending Interchain Account transactions

Now that we have a funded Interchain account, we can send Interchain Accounts transactions using the intertx submit command.

This command accepts a generic sdk.Msg JSON payload or path to JSON file as an arg.

• Staking delagation

# Output the host chain validator operator address: cosmosvaloper1qnk2n4nlkpw9xfqntladh74w6ujtulwnmxnh3k
cat ./data/seoul/config/genesis.json | jq -r '.app_state.genutil.gen_txs[0].body.messages[0].validator_address'

# Submit a staking delegation tx using the interchain account via ibc
icad tx intertx submit \
'{
    "@type":"/cosmos.staking.v1beta1.MsgDelegate",
    "delegator_address":"cosmos15ccshhmp0gsx29qpqq6g4zmltnnvgmyu9ueuadh9y2nc5zj0szls5gtddz",
    "validator_address":"cosmosvaloper1qnk2n4nlkpw9xfqntladh74w6ujtulwnmxnh3k",
    "amount": {
        "denom": "stake",
        "amount": "3000"
    }
}' --connection-id connection-0 --from $DEMOWALLET_1 --chain-id hackatom --home ./data/hackatom --node tcp://localhost:16657 --keyring-backend test -y

# Alternatively provide a path to a JSON file
icad tx intertx submit [path/to/msg.json] --connection-id connection-0 --from $DEMOWALLET_1 --chain-id hackatom --home ./data/hackatom --node tcp://localhost:16657 --keyring-backend test -y

# Wait until the relayer has relayed the packet

# Inspect the staking delegations on the host chain
icad q staking delegations-to cosmosvaloper1qnk2n4nlkpw9xfqntladh74w6ujtulwnmxnh3k --home ./data/seoul --node tcp://localhost:26657

This is the situation before after sending the staking tx. The user who is the owner of the ICA has staked funds on the host chain to a validator of choice through an interchain accounts packet.

Testing timeout scenario

1. Stop the Hermes relayer process and send another staking delegation transaction using interchain accounts, as in the example provided above.

2. Wait for approx. 1 minute for the timeout to elapse.

3. Restart the relayer process

   make start-hermes-rly

4. Observe the packet timeout and relayer reacting appropriately (issuing a MsgTimeout to testchain hackatom).

5. Due to the nature of ordered channels, the timeout will subsequently update the state of the channel to STATE_CLOSED. Observe both channel ends by querying the IBC channels for each node.

   # inspect channel ends on hackatom chain
   icad q ibc channel channels --home ./data/hackatom --node tcp://localhost:16657
   
   # inspect channel ends on seoul chain
   icad q ibc channel channels --home ./data/seoul --node tcp://localhost:26657

6. Open a new channel for the existing interchain account on the same connection.

   icad tx intertx register --from $DEMOWALLET_1 --connection-id connection-0 --chain-id hackatom --home ./data/hackatom --node tcp://localhost:16657 --keyring-backend test -y

7. Inspect the IBC channels once again and observe a new creately interchain accounts channel with STATE_OPEN.

   # inspect channel ends on hackatom chain
   icad q ibc channel channels --home ./data/hackatom --node tcp://localhost:16657
   
   # inspect channel ends on seoul chain
   icad q ibc channel channels --home ./data/seoul --node tcp://localhost:26657

Collaboration

Please use conventional commits https://www.conventionalcommits.org/en/v1.0.0/

chore(bump): bumping version to 2.0
fix(bug): fixing issue with...
feat(featurex): adding feature...