tim-hellhake / esphome-adapter Goto Github PK

Hi,
I was trying out Mozilla webthings, and was pleasantly surprised that it found my Xiaomi humidity / temperature sensors connected via ESP32 to home assistant.
Not sure what changed, but I can't get any data from them anymore. I've tried removing them and rediscovering, but they are no longer detected.
I see this in the logs, any thoughts how this can be fixed?
Kind regards,
geoff.

2020-12-07 03:48:00.191 INFO : esphome-adapter: Discovered api service at downstairs_temp.local
2020-12-07 03:48:00.194 INFO : esphome-adapter: Probing 10.2.8.123:80
2020-12-07 03:48:00.196 INFO : esphome-adapter: Unhandled Rejection
2020-12-07 03:48:00.198 ERROR : esphome-adapter: Error: no auth mechanism defined
2020-12-07 03:48:00.199 ERROR : esphome-adapter: at Auth.onRequest (/home/pi/.webthings/addons/esphome-adapter/node_modules/request/lib/auth.js:132:32)
2020-12-07 03:48:00.200 ERROR : esphome-adapter: at Request.auth (/home/pi/.webthings/addons/esphome-adapter/node_modules/request/request.js:1347:14)
2020-12-07 03:48:00.201 ERROR : esphome-adapter: at Request.init (/home/pi/.webthings/addons/esphome-adapter/node_modules/request/request.js:378:10)
2020-12-07 03:48:00.202 ERROR : esphome-adapter: at new Request (/home/pi/.webthings/addons/esphome-adapter/node_modules/request/request.js:127:8)
2020-12-07 03:48:00.203 ERROR : esphome-adapter: at request (/home/pi/.webthings/addons/esphome-adapter/node_modules/request/index.js:53:10)
2020-12-07 03:48:00.205 ERROR : esphome-adapter: at Promise (/home/pi/.webthings/addons/esphome-adapter/lib/fetch.js:11:9)
2020-12-07 03:48:00.206 ERROR : esphome-adapter: at new Promise ()
2020-12-07 03:48:00.207 ERROR : esphome-adapter: at Object.fetch (/home/pi/.webthings/addons/esphome-adapter/lib/fetch.js:10:12)
2020-12-07 03:48:00.208 ERROR : esphome-adapter: at ESPHomeAdapter. (/home/pi/.webthings/addons/esphome-adapter/lib/esphome-adapter.js:62:42)
2020-12-07 03:48:00.210 ERROR : esphome-adapter: at Generator.next ()

If the api is enabled on the firmware the http endpoint is not advertised.
Without the http advertisement it's not clear which port to use.
Add a fallback port to the config to allow the adapter to still connect to the device.

The discovery fails if the first address is an ipv6 address:
Error: getaddrinfo ENOTFOUND 2a01 2a01:80

WebThingsIO/schemas#66

as discussed on IRC, I have added the ESPHome addon, flashed one of my sonoffs with ESPHome using this config and WTG log output at:
https://gist.github.com/BrianGilbert/5b378b75ec46380403e583f00d47d48a

I configured the user and pass in the addon config of WT Gateway.

Then I tried to add a device, initially I did get one device found when scanning, but I was unable to add it.