Error in step-17 Running Detailed Routing about openlane

[vijayank88]

@Sanchit-Gupta10

elapsed time = 00:20:59, memory = 10815.96 (MB).
child killed: kill signal

is related to your peak memory used. How much RAM/Swap memory available?

Also test case attached is missing some files. Attach a valid test case.

[Sanchit-Gupta10]

I dont't know how to add valid test case.. Can you please help me doing this

[vijayank88]

Increase the swap memory and try again.
Check your screenshot at the end available 10866
Router stopped once reached peak memory 10815.

I believe you attached issue_reproducible1.zip check for issue_reproducible directory and attach it.

[vijayank88]

I dont't know how to add valid test case.. Can you please help me doing this

@Sanchit-Gupta10
Check https://openlane.readthedocs.io/en/latest/for_developers/using_or_issue.html#manually for creating test case manually.

[Sanchit-Gupta10]

@vijayank88 i have increased the swap size and now step 17 is passed successfully but now i am gettng error in the last step i.e. step 36 [Running Circuit Validity Checker ERC ]

[ERROR]: There are setup violations in the design at the typical corner.

[ERROR]: Flow failed.
[INFO]: The failure may have been because of the following warnings:
[WARNING]: There are max slew violations in the design at the typical corner.
[WARNING]: There are max fanout violations in the design at the typical corner.
[WARNING]: There are max capacitance violations in the design at the typical corner.

[vijayank88]

@Sanchit-Gupta10

ERROR]: There are setup violations in the design at the typical corner.

Check your timing report and fix the setup violations

[kareefardi]

@Sanchit-Gupta10 Please open a new issue for timing violations, if needed.