Section |
---|
Objectives |
Active Record |
Example |
Instructions |
Resources |
๐ ๐ป ๐
In this lab, you'll be creating the following tables: costumes
, costume_stores
, and haunted_houses
. You'll be creating the following classes: Costume
, CostumeStore
, and HauntedHouse
.
The costumes
table will have four columns:
- name
- price
- size
- image url
The costume_stores
table will have seven columns:
- name
- location
- number of costumes, or "costume inventory"
- number of employees
- whether or not it's still in business
- opening time
- closing time
The haunted_houses
table will have eight columns:
- name
- location
- theme
- price
- whether they're family friendly or not
- opening date
- closing date
- long description
Before coding out the creation of these tables, read about Active Record below:
Active Record is magic. Well, not really. But it does build out a bunch of methods for you. For instance, when it's used properly it will give you access to methods such as create
, save
, and find_by
. Rejoice! Never again will you have to manually build out these methods!
Active Record allows you to create a database that interacts with your class with only a few lines of code. These lines of code go to creating a model, which resides in the app/models
folder, and a migration, which resides in the db/migrate
folder.
The model inherits from ActiveRecord::Base
while the migration inherits from ActiveRecord::Migration
. Many migrations these days have a change
method, but you might also see migrations with an up
and a down
method instead. To use Active Record, you have to stick to some specific naming conventions: while the migrations are plural, the models are singular.
To start, the class names in the migration files must match their file names. For instance, a class in the migration file called 20141013204115_create_candies.rb
must be named CreateCandies
while a class in a migration file called 20130915204319_add_addresses_to_houses.rb
must be called AddAddressesToHouses.
You might notice that in both the examples above, the numbers at the front of the file name were ignored. These numbers are in the form YYYYMMDDHHMMSS
. Later on, these timestamps will become important as Rails uses them to determine which migration should be run and in what order. For instance, if you made a table called dog_walkers
and then added a column to it called rating
, that would be fine as the timestamp on the table creation would be before adding a column to it. However, if you did this in reverse order, that is adding a column to a table that doesn't exist then creating the table, you would get an error.
Migrations, as it was mentioned before, inherit from ActiveRecord::Migration
and usually have a method called change
. In change, you can create a table with the create_table method. This method automatically will create a primary key column called id
, but this default can be overridden if you'd like to customize it.
Here's a simple example of the create_table
method in action:
class CreateDogs < ActiveRecord::Migration
def change
create_table :dogs do |t|
t.string :name
t.string :breed
end
end
end
The above code would create a table called dogs
with three columns: name
, breed
(both explicitly created), and an implicitly created id
column.
Take a look at a few data types that Active Record supports below:
Data Type | Examples |
---|---|
boolean | true, false |
integer | 2, -13, 485 |
string | "Halloween", "Boo!", strings betweeen 1-255 characters |
datetime | DateTime.now, DateTime.new(2014,10,31) |
float | 2.234, 32.2124, -6.342 |
text | strings between 1 and 2 ^ 32 - 1 characters |
Like migrations, models also inherit, but they inherit from ActiveRecord::Base
. A simple model would look like this:
class Dog < ActiveRecord::Base
end
Even though there are no explicit methods for retrieving name
and breed
, this Dog
model is associated with the created dogs
table above. Because of this integration, we can call name
, breed
, and id
on any new instance of the Dog class. For example:
shiloh = Dog.new
=> #<Dog id: 1, name: nil, breed: nil>
shiloh.name = "Shiloh"
=> "Shiloh"
shiloh.breed = "Beagle"
=> "Beagle"
shiloh.save
=> true
Dog.find_by(:name => "Shiloh") == shiloh
=> true
Notice that you had access to reader and writer methods that cooperated with the database that you never had to actually code. You could set the name without ever writing def name=()
and call the self.find_by(attribute)
method without ever teaching your Dog class how to look up data in the database. It's pretty awesome. Take a look at an example below.
For instance, let's say you wanted to make a class called Candy
. Candies should have two attributes, a name (string) and the number of calories (integer), you would write the migration as seen below:
db/migrations/20130915204319_create_candies.rb
class CreateCandies < ActiveRecord::Migration
def change
create_table :candies do |t|
t.string :name
t.integer :calories
t.timestamps
end
end
end
Note: You might be wondering what t.timestamps
is doing here. Well, it creates two new columns, created_at
and updated_at
. These are handy columns to have around as sometimes you want to query based on the time of creation or update-tion instead of querying using attributes or ids. To read more about timestamps, go to Active Record's docs on them.
While the migration was plural, the model would be singular:
app/models/candy.rb
class Candy < ActiveRecord::Base
end
After saving the code above, running rake db:migrate
will apply the desired changes to the database by running the change method. Then you can alter the database with simple Ruby statements.
For instance, you could create three rows in the table easily:
Candy.create(:name => "Milky Way Midnight", :calories => 220)
Candy.create(:name => "Snickers", :calories => 550)
Candy.create(:name => "Reese's Peanut Butter Cups", :calories => 210)
Retrieving information is just as painless:
reeses = Candy.find_by(:name => "Reese's Peanut Butter Cups")
# => #<Candy id: 3, name: "Reese's Peanut Butter Cups", calories: 210>
Candy.first
# => #<Candy id: 1, name: "Mikly Way Midnight", calories: 220>
snickers = Candy.find(2)
# => #<Candy id: 2, name: "Snickers", calories: 550>
As is viewing attributes:
reeses = Candy.find(3)
# => #<Candy id: 3, name: "Reeeese's Peanut Batter Cups", calories: 210>
reeses.calories
# => 210
reeses.name
# => "Reeeese's Peanut Batter Cups"
Updating information and viewing table info is also quite simple:
snickers = Candy.find(2)
# => #<Candy id: 2, name: "Snickers", calories: 550>
snickers.update(:calories => 250)
# => true
reeses = Candy.last
# => #<Candy id: 3, name: "Reeeese's Peanut Batter Cups", calories: 210>
reeses.update(:name => "Reese's Peanut Butter Cups")
# => true
Candy.find(2)
# => #<Candy id: 2, name: "Snickers", calories: 250>
Candy.last
# => #<Candy id: 3, name: "Reese's Peanut Butter Cups", calories: 210>
Isn't that amazing? Eleven lines of code allows you to create a table and a class that interact with each other elegantly and efficiently. It builds out methods like, create
, update
, count
, name
, calories
, along with others such as build
and save
.
You will only be altering code in six files, the three files in the models
folder and the three files in the db/migrations
folder.
โโโ app
โ โโโ models
โ โโโ costume.rb
โ โโโ costume_store.rb
โ โโโ haunted_house.rb
โโโdb
โโโ migrations
โโโ 001_create_costumes.rb
โโโ 002_create_costume_stores.rb
โโโ 003_create_haunted_houses.rb
This is a test-driven lab so start with the first test and work your way down.
Your models should be no longer than two lines of code.
- The first step is to run
bundle install
. - Create the Costume class in
app/models/
. - Fill out the Active Record migration for costumes such that it passes the specs.
- Create the CostumeStore class in
app/models/
. - Fill out the Active Record migration for
costume_stores
such that it passes the specs. - Create the HauntedHouse class in
app/models/
. - Fill out the Active Record migration for haunted_houses such that it passes the specs.
- Remember to run
rake db:migrate
every time you create a migration. - Just like for any other lab, run
rspec
to view your progress.
- Active Record Migrations
- Just look at the code for the example migrations
- Creating Active Record Models
- Timestamps
View Active Record Costume Store on Learn.co and start learning to code for free.