teotikalki / prosafelinux

Configure Netgear ProSafe Plus Switches on linux

If your interface is not eth0 please specify it, when you call psl.py.

Examples

Gives an overview of all available options

./psl.py --help

Discover all ProSafe switches on the local network

./psl.py --interface eth1 discover

Set 802.1Q VLAN VID for port 4 to 1

./psl-cli.py  set --passwd "password" --mac B0:B9:8A:57:F6:56 --vlan_pvid 4 1

Query all ports for their 802.1Q VLAN port VID

./psl-cli.py query --mac B0:B9:8A:57:F6:56 vlan_pvid

Help wanted

Im sorry I am not active at this project anymore. It is open-source so perhabs you could find soneone who can help you.

I have found a security problem with this switch and was very disapointed in the answer from netgear. They need more than 6 Month to fix it and want the ethernet adress of it

Because of this, I do not use this switch anymore.

If you can read german, please read this two articles:

http://www.linux-magazin.de/Blogs/Insecurity-Bulletin/Gastbeitrag-Security-by-Obscurity-bei-Netgear-Switches http://www.linux-magazin.de/Ausgaben/2012/10/Switch � Please feel free to fork the code and do any push request.

Please contact me if you like to do the new maintainer of the projekt Sven Anders <[email protected]>

Other similar projects

https://github.com/Z3po/Netgearizer (We are merging code together.)

Authors

• Asbjørn Sloth Tønnesen
• Lars Dennis Renneberg Andersen
• Svenne Krap
• Shane Kerr
• Sven Anders

See also: http://git.asbjorn.biz/?p=gs105e.git;a=summary

It would be nice if you pay attribution to this project if you use this code.

If you like the projekt, you may