techyg / voron0stuff

Voron0Stuff

Welome to my Voron Stuff Repository! This is where I dump files to help share what I am working on with the Voron community. You probably found this link via my Youtube Channel (Greg's Maker Corner) or through Discord.

Check out my channel by going here: http://www.gregsmakercorner.com

Klipper Configuration Files:

** Note: Klipper often has new releases with breaking changes. I try to keep these files updated, but please beware that they may not work with the latest version of Klipper. This is especially true of the printer.cfg files which seem to break more frequently.

DisplayEncoder.cfg - for use with the Voron 0 display. Make sure you include this file from your printer.cfg using [include DisplayEncoder.cfg]

DisplayMenu.cfg - this specifies all the custom menu options. Make sure you include this file from your printer.cfg using [include DisplayMenu.cfg]

klipper_Expander.cfg - the config file that I use for my klipper expander. Must be included from printer.cfg file.

ldokit-voron01.cfg - my printer.cfg file for the LDO Kit v0.1.

voron01-0.5-printer.cfg - printer.cfg file for my original v0.1, which uses an AC Bed and the original v0.0 motors.

Slicer Files - Prusa Slicer

Prusa*.* - Slicer profiles I use for ASA, TPU, ABS

Slicer Files - Idea Maker

Voron 0.1-export.printer - my voron 0 printer configuration file

V0 ABS-export.bin - My ABS Settings.

V0 PLA-export.bin - My Slicer settings.

V0 TPU-export.bin - Generic TPU settings.

V0 TPE-Inland - Settings for Inland TPE (Shore Hardness 87A)

V0 TPU-NinjaFlex - Settings for Ninjaflex TPU (Shore Hardness 85A)

V0 TPU-SainSmart - Settings for Sainsmart TPU (Shore Hardness 95A)

Please note that you may need to add some GCODE sections for the slicing profiles to work. Refer to my printer configuration file.

Other files:

LGXLiteHartKPCBMountv2.stl - Hartk PCB toolhead mount for the Stealthburner with LGX Lite. You will need to m3x8's (recommend using washers) and also two heat inserts for the PCB.

LGXLiteHartKPCBMountv2.scad - Open SCAD source code file, you can customize the PCB mount fairly easily with this and Open SCAD.