The codebase implements a starter agent that can solve a number of universe
environments.
It contains a basic implementation of the A3C algorithm, adapted for real-time environments.
- Python 2.7 or 3.5
- six (for py2/3 compatibility)
- TensorFlow 0.12
- tmux (the start script opens up a tmux session with multiple windows)
- htop (shown in one of the tmux windows)
- gym
- gym[atari]
- universe
- opencv-python
- numpy
- scipy
conda create --name universe-starter-agent python=3.5
source activate universe-starter-agent
brew install tmux htop cmake # On Linux use sudo apt-get install -y tmux htop cmake
pip install gym[atari]
pip install universe
pip install six
pip install tensorflow
conda install -y -c https://conda.binstar.org/menpo opencv3
conda install -y numpy
conda install -y scipy
Add the following to your .bashrc
so that you'll have the correct environment when the train.py
script spawns new bash shells
source activate universe-starter-agent
python train.py --num-workers 2 --env-id PongDeterministic-v3 --log-dir /tmp/pong
The command above will train an agent on Atari Pong using ALE simulator.
It will see two workers that will be learning in parallel (--num-workers
flag) and will output intermediate results into given directory.
The code will launch the following processes:
- worker-0 - a process that runs policy gradient
- worker-1 - a process identical to process-1, that uses different random noise from the environment
- ps - the parameter server, which synchronizes the parameters among the different workers
- tb - a tensorboard process for convenient display of the statistics of learning
Once you start the training process, it will create a tmux session with a window for each of these processes. You can connect to them by typing tmux a
in the console.
Once in the tmux session, you can see all your windows with ctrl-b w
.
To switch to window number 0, type: ctrl-b 0
. Look up tmux documentation for more commands.
To access TensorBoard to see various monitoring metrics of the agent, open http://localhost:12345/ in a browser.
Using 16 workers, the agent should be able to solve PongDeterministic-v3
(not VNC) within 30 minutes (often less) on an m4.10xlarge
instance.
Using 32 workers, the agent is able to solve the same environment in 10 minutes on an m4.16xlarge
instance.
If you run this experiment on a high-end MacBook Pro, the above job will take just under 2 hours to solve Pong.
Add '--visualise' toggle if you want to visualise the worker using env.render() as follows:
python train.py --num-workers 2 --env-id PongDeterministic-v3 --log-dir /tmp/pong --visualise
For best performance, it is recommended for the number of workers to not exceed available number of CPU cores.
You can stop the experiment with tmux kill-session
command.
The main difference with the previous experiment is that now we are going to play the game through VNC protocol.
The VNC environments are hosted on the EC2 cloud and have an interface that's different from a conventional Atari Gym
environment; luckily, with the help of several wrappers (which are used within envs.py
file)
the experience should be similar to the agent as if it was played locally. The problem itself is more difficult
because the observations and actions are delayed due to the latency induced by the network.
More interestingly, you can also peek at what the agent is doing with a VNCViewer.
Note that the default behavior of train.py
is to start the remotes on a local machine. Take a look at https://github.com/openai/universe/blob/master/doc/remotes.rst for documentation on managing your remotes. Pass additional -r
flag to point to pre-existing instances.
python train.py --num-workers 2 --env-id gym-core.PongDeterministic-v3 --log-dir /tmp/vncpong
Peeking into the agent's environment with TurboVNC
You can use your system viewer as open vnc://localhost:5900
(or open vnc://${docker_ip}:5900
) or connect TurboVNC to that ip/port.
VNC password is "openai"
.
One of the novel challenges in using Universe environments is that they operate in real time, and in addition, it takes time for the environment to transmit the observation to the agent. This time creates a lag: where the greater the lag, the harder it is to solve environment with today's RL algorithms. Thus, to get the best possible results it is necessary to reduce the lag, which can be achieved by having both the environments and the agent live on the same high-speed computer network. So for example, if you have a fast local network, you could host the environments on one set of machines, and the agent on another machine that can speak to the environments with low latency. Alternatively, you can run the environments and the agent on the same EC2/Azure region. Other configurations tend to have greater lag.
To keep track of your lag, look for the phrase reaction_time
in
stderr. If you run both the agent and the environment on nearby
machines on the cloud, your reaction_time
should be as low as 40ms.
The reaction_time
statistic is printed to stderr because we wrap our
environment with the Logger
wrapper, as done in
here.
Generally speaking, environments that are most affected by lag are
games that place a lot of emphasis on reaction time. For example,
this agent is able to solve VNC Pong
(gym-core.PongDeterministic-v3
) in under 2 hours when both the agent
and the environment are co-located on the cloud, but this agent had
difficulty solving VNC Pong when the environment was on the cloud
while the agent was not. This issue affects environments that place
great emphasis on reaction time.
This implementation has been tuned to do well on VNC Pong, and we do not guarantee its performance on other tasks. It is meant as a starting point.
You may run the following command to launch the agent on the game Neon Race:
python train.py --num-workers 2 --env-id flashgames.NeonRace-v0 --log-dir /tmp/neonrace
What agent sees when playing Neon Race
(you can connect to this view via note above)
Getting 80% of the maximal score takes between 1 and 2 hours with 16 workers, and getting to 100% of the score takes about 12 hours. Also, flash games are run at 5fps by default, so it should be possible to productively use 16 workers on a machine with 8 (and possibly even 4) cores.
Now that you have seen an example agent, develop agents of your own. We hope that you will find doing so to be an exciting and an enjoyable task.