surfsound / 3d-printers

Addons and configuration for 3D printers

Addons and configuration for 3D printers

Anycubic i3 mega S Klipper fast printing (first layer on 200 mm/s speed): https://youtu.be/GtIsCP1_Cyg

Klipper configuration file for Anycubic i3 mega S

This config file contains settings of all printer pins (steppers, sensors) for Anycubic i3 mega S in the factory configuration

Klipper firmware should be compiled for the atmega2560

Config file includes

• Configuration for original or 2208(2209), rotated by cabel, drivers
• Mesh bed leveling: BLtouch (3DTouch sensor from Triangelab)
• Manual meshed bed leveling (commented out)
• 'virtual_sdcard' for fast printing without gaps
• Beeper through M300 gcode
• Pause/Resume through M600 for filament change

Home position is determined by 3DTouch. Z limit switches are not used.

The latest version of the config reference is also available online at: https://www.klipper3d.org/Config_Reference.html


!!! Do not forget to check your configuration for: !!!

• step_distance
• nozzle_diameter
• pressure_advance
• serial
• [bltouch]
• [virtual_sdcard]

!!! Also important to follow all config check from this manual before start printing: https://www.klipper3d.org/Config_checks.html

---

Useful documentation for slicer/printer (not special for Klipper) calibration: https://teachingtechyt.github.io/calibration.html#intro