suidroot / pyuniden

Python Library for the Uniden BCT15X and BCD996P2

pyUniden

Python Library for the Uniden Scanners using the Serial interface protocol.

This library has been tested on the Uniden BCT15X and BCD996P2. These both use a simlar command set.

PORT = '/dev/ttyACM0'
SPEED = 115200

scanner = pyuniden.Unidenrc()
scanner.openserial(PORT, SPEED)
scanner.pushbutton("2","P",function=True)
scanner.closeserial()

Uniden Protocol Specs

http://info.uniden.com/twiki/pub/UnidenMan4/BCT15XFirmwareUpdate/BCT15X_v1.03.00_Protocol.pdf http://info.uniden.com/twiki/pub/UnidenMan4/BCD996P2/BCD996P2_Remote_Protocol_ver_1_03.pdf

pyuniden's Issues

Remote Uniden BR330T

@suidroot , Hello Ben,

My name is Ger from the Netherlands.
I am very intrested in your scripts for remote Uniden radio scanner.
I wonder if it is possible to use my scanner BR330T (UBC3500xlt).
When i run the program it is doing nothing.
I use a usb cable with the serial inside (attachement)
Can you explian to me how to handle.
I am using Raspberry pi 3.

When i use your pyuniden init.py then get error
==== RESTART: /home/pi/piscannerwebcontrol/pyUniden/pyuniden/init.py ====
Traceback (most recent call last):
File "/home/pi/piscannerwebcontrol/pyUniden/pyuniden/init.py", line 3, in
from .pyuniden import *
SystemError: Parent module '' not loaded, cannot perform relative import

When i remove the dot . then it runs, but do nothing.

Thanks in advance for answer
greetings Ge

r