stgloorious / teensy.pretty

KiCAD library for Teensy microcontrollers

Teensy footprint library for KiCAD

This repo includes KiCAD footprints for the following Teensy versions:

Teensy	Pinouts	3D model
Teensy 1.0	C, Arduino	❌
Teensy++ 1.0	C, Arduino	❌
Teensy 2.0	C, Ardino	❌
Teensy++ 2.0	C, Arduino	❌
Teensy 3.0	Front, Back	❌
Teensy 3.1	Front, Back	❌
Teensy 3.2	Front, Back	❌
Teensy LC	Front, Back	❌
Teensy 3.5	Front, Back	✔️ (by Darcy)
Teensy 3.6	Front, Back	✔️ (by Darcy)
Teensy 4.0*	Front, Back	✔️
Teensy 4.1	Front, Back	✔️ (by Zack Kummer)

* includes SMT version

Notes:

• The Teensy 4.0 SMT footprint requires the addition of edge cuts (indicated by lines in the Dwgs.User layer) which create castellated connections for most pins. Pins 2, 3, 31, 32 & 34 are not castellated and will require careful soldering and probably a wire to ensure a reliable connection.
• There are two footprints for Teensy 3.0/3.1/3.2 and 3.5/3.6. One that includes the through-hole connections on Teensy and one that adds all of the SMT connections on the bottom of the Teensy.

For symbols look here: https://github.com/XenGi/teensy_library